{"id":18603,"date":"2026-10-06T00:55:00","date_gmt":"2026-10-05T16:55:00","guid":{"rendered":"https:\/\/www.wehopower.com\/?post_type=news&p=18603"},"modified":"2026-10-06T00:55:00","modified_gmt":"2026-10-05T16:55:00","slug":"power-supply-shipping-packaging-oem-shipment-evidence","status":"publish","type":"news","link":"https:\/\/www.wehopower.com\/el\/news\/power-supply-shipping-packaging-oem-shipment-evidence\/","title":{"rendered":"Power Supply Shipping Packaging: Protect Terminals and Keep OEM Shipment Evidence"},"content":{"rendered":"<p><strong>Last Updated:<\/strong> 2026-10-05<\/p>\n<p><strong>Quick Answer:<\/strong> Power supply shipping packaging should protect the actual component&#8217;s exposed terminal end and enclosure, keep each unit linked to the packing list, and preserve a usable dispatch-to-receipt condition record. Start from the complete model and its physical drawing, obtain the applicable packaging and handling requirements, document the packing arrangement before closure, and give the receiving team a clear route for transport exceptions. A carton that looks tidy is not evidence of a qualified protective design, and an undamaged delivery is not an electrical acceptance test.<\/p>\n<p>An OEM can order the correct power supply and still lose time when the shipment arrives. A loose accessory may press against the terminal cover, a packing list may describe only a family name, or an incoming photograph may show the unit after the original carton has already been discarded. Those are shipment-control problems, separate from spare storage, voltage-variant picking or powered equipment testing. <strong>Power supply shipping packaging<\/strong> is most useful when physical protection and the record of what was handed over are planned together.<\/p>\n<p>This guide uses the WEHO LRS-150-12 as a specific enclosed-supply example. Its real source label reads LRS-150-12, with output 12 V and 12.5 A, and nominal input markings of 100\u2013240 VAC\/3.0 A at 50\/60 Hz. The current mechanical sheet documents a 159 mm long, 97 mm wide and 30 mm high case. The short front edge carries the rating label above seven clear-covered screw terminals, with an adjustment control and small indicator lens to the right. These facts help identify the object being packed. They do not approve a machine load, transport test or energizing procedure. The source photo, current specification and webpage use different input descriptions; this shipping workflow preserves the photo&#8217;s identification markings without resolving them into an electrical operating recommendation.<\/p>\n<figure class=\"wp-block-image size-full\"><img fetchpriority=\"high\" decoding=\"async\" width=\"1536\" height=\"1024\" src=\"https:\/\/i1.wp.com\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/01-product-detail-19.png?quality=85&strip=all\" alt=\"Power Supply Shipping Packaging: Protect Terminals and Keep OEM Shipment Evidence  title=\" class=\"wp-image-18599\" loading=\"eager\" power supply shipping packaging: protect terminals and keep oem shipment evidence title =\"\" srcset=\"https:\/\/i1.wp.com\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/01-product-detail-19.png?quality=85&strip=all 1536w, https:\/\/i1.wp.com\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/01-product-detail-19-300x200.png?quality=85&strip=all 300w, https:\/\/i1.wp.com\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/01-product-detail-19-1024x683.png?quality=85&strip=all 1024w, https:\/\/i1.wp.com\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/01-product-detail-19-768x512.png?quality=85&strip=all 768w, https:\/\/i1.wp.com\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/01-product-detail-19-18x12.png?quality=85&strip=all 18w\" sizes=\"(max-width: 1536px) 100vw, 1536px\" \/><\/figure>\n<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_86 counter-hierarchy ez-toc-counter ez-toc-grey ez-toc-container-direction\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\" style=\"cursor:inherit\">\u03a0\u03af\u03bd\u03b1\u03ba\u03b1\u03c2 \u03c0\u03b5\u03c1\u03b9\u03b5\u03c7\u03bf\u03bc\u03ad\u03bd\u03c9\u03bd<\/p>\n<span class=\"ez-toc-title-toggle\"><a href=\"#\" class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" aria-label=\"Toggle Table of Content\"><span class=\"ez-toc-js-icon-con\"><span class=\"\"><span class=\"eztoc-hide\" style=\"display:none;\">\u039c\u03c0\u03b1\u03c1\u03ad\u03c4\u03b1<\/span><span class=\"ez-toc-icon-toggle-span\"><svg style=\"fill: #999;color:#999\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" class=\"list-377408\" width=\"20px\" height=\"20px\" viewbox=\"0 0 24 24\" fill=\"none\"><path d=\"M6 6H4v2h2V6zm14 0H8v2h12V6zM4 11h2v2H4v-2zm16 0H8v2h12v-2zM4 16h2v2H4v-2zm16 0H8v2h12v-2z\" fill=\"currentColor\"><\/path><\/svg><svg style=\"fill: #999;color:#999\" class=\"arrow-unsorted-368013\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"10px\" height=\"10px\" viewbox=\"0 0 24 24\" version=\"1.2\" baseprofile=\"tiny\"><path d=\"M18.2 9.3l-6.2-6.3-6.2 6.3c-.2.2-.3.4-.3.7s.1.5.3.7c.2.2.4.3.7.3h11c.3 0 .5-.1.7-.3.2-.2.3-.5.3-.7s-.1-.5-.3-.7zM5.8 14.7l6.2 6.3 6.2-6.3c.2-.2.3-.5.3-.7s-.1-.5-.3-.7c-.2-.2-.4-.3-.7-.3h-11c-.3 0-.5.1-.7.3-.2.2-.3.5-.3.7s.1.5.3.7z\"\/><\/svg><\/span><\/span><\/span><\/a><\/span><\/div>\n<nav><ul class='ez-toc-list ez-toc-list-level-1' ><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/www.wehopower.com\/el\/news\/power-supply-shipping-packaging-oem-shipment-evidence\/#Define_the_shipment_before_designing_the_packing\" >Define the shipment before designing the packing<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/www.wehopower.com\/el\/news\/power-supply-shipping-packaging-oem-shipment-evidence\/#Map_vulnerable_features_from_the_actual_enclosure\" >Map vulnerable features from the actual enclosure<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/www.wehopower.com\/el\/news\/power-supply-shipping-packaging-oem-shipment-evidence\/#Protect_the_terminal_end_without_creating_a_new_problem\" >Protect the terminal end without creating a new problem<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/www.wehopower.com\/el\/news\/power-supply-shipping-packaging-oem-shipment-evidence\/#Link_the_packing_list_to_identifiable_contents\" >Link the packing list to identifiable contents<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/www.wehopower.com\/el\/news\/power-supply-shipping-packaging-oem-shipment-evidence\/#Capture_a_small_useful_evidence_set_before_closure\" >Capture a small, useful evidence set before closure<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/www.wehopower.com\/el\/news\/power-supply-shipping-packaging-oem-shipment-evidence\/#Review_condition_at_the_receiving_handover\" >Review condition at the receiving handover<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/www.wehopower.com\/el\/news\/power-supply-shipping-packaging-oem-shipment-evidence\/#Use_a_specific_exception_record_rather_than_a_vague_rejection\" >Use a specific exception record rather than a vague rejection<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/www.wehopower.com\/el\/news\/power-supply-shipping-packaging-oem-shipment-evidence\/#Keep_packaging_evidence_separate_from_electrical_release\" >Keep packaging evidence separate from electrical release<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-9\" href=\"https:\/\/www.wehopower.com\/el\/news\/power-supply-shipping-packaging-oem-shipment-evidence\/#Key_Takeaways\" >Key Takeaways<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-10\" href=\"https:\/\/www.wehopower.com\/el\/news\/power-supply-shipping-packaging-oem-shipment-evidence\/#Conclusion\" >\u03a3\u03cd\u03bd\u03b1\u03c8\u03b7<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-11\" href=\"https:\/\/www.wehopower.com\/el\/news\/power-supply-shipping-packaging-oem-shipment-evidence\/#Frequently_Asked_Questions\" >\u03a3\u03c5\u03c7\u03bd\u03ad\u03c2 \u0395\u03c1\u03c9\u03c4\u03ae\u03c3\u03b5\u03b9\u03c2<\/a><ul class='ez-toc-list-level-3' ><li class='ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-12\" href=\"https:\/\/www.wehopower.com\/el\/news\/power-supply-shipping-packaging-oem-shipment-evidence\/#Does_the_LRS-150_body_size_define_an_approved_shipping_carton\" >Does the LRS-150 body size define an approved shipping carton?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-13\" href=\"https:\/\/www.wehopower.com\/el\/news\/power-supply-shipping-packaging-oem-shipment-evidence\/#Can_a_clear_terminal_cover_carry_the_packing_restraint_load\" >Can a clear terminal cover carry the packing restraint load?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-14\" href=\"https:\/\/www.wehopower.com\/el\/news\/power-supply-shipping-packaging-oem-shipment-evidence\/#Which_photographs_are_useful_before_the_carton_is_closed\" >Which photographs are useful before the carton is closed?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-15\" href=\"https:\/\/www.wehopower.com\/el\/news\/power-supply-shipping-packaging-oem-shipment-evidence\/#What_should_receiving_staff_do_with_a_visible_transport_exception\" >What should receiving staff do with a visible transport exception?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-16\" href=\"https:\/\/www.wehopower.com\/el\/news\/power-supply-shipping-packaging-oem-shipment-evidence\/#Do_the_illustrations_show_WEHO-approved_packaging_or_genuine_shipment_records\" >Do the illustrations show WEHO-approved packaging or genuine shipment records?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-17\" href=\"https:\/\/www.wehopower.com\/el\/news\/power-supply-shipping-packaging-oem-shipment-evidence\/#Does_an_intact_delivery_authorise_electrical_installation_or_energizing\" >Does an intact delivery authorise electrical installation or energizing?<\/a><\/li><\/ul><\/li><\/ul><\/nav><\/div>\n<h2><span class=\"ez-toc-section\" id=\"Define_the_shipment_before_designing_the_packing\"><\/span>Define the shipment before designing the packing<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Ask what is actually being handed over: individual loose supplies, an OEM kit containing separate accessories, or supplies already built into an equipment assembly. The protective arrangement and evidence record must correspond to that scope. Do not borrow the packing assumptions for an assembled cabinet when the order contains loose chassis components, or use a series-level illustration as an approved individual packing drawing.<\/p>\n<p>Record the complete model, ordered quantity, purchase-order reference, packing arrangement revision where applicable, destination and responsible dispatch contact. If an OEM, distributor and depot each handle the goods, identify who records condition at each handover. That information makes a later exception easier to locate without pretending that one photograph establishes every event in the transport chain.<\/p>\n<p>\u039f <a href=\"https:\/\/www.wehopower.com\/el\/product\/150w-ac-dc-switching-power-supply\/\">official WEHO LRS-150 product page<\/a> gives series and model context. A catalogue packing entry is not a substitute for confirming the actual order&#8217;s carton quantity, materials, route requirements or agreed protective arrangement. Obtain current instructions applicable to the shipment rather than treating a general catalogue entry as packaging qualification.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"Map_vulnerable_features_from_the_actual_enclosure\"><\/span>Map vulnerable features from the actual enclosure<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>The source drawing&#8217;s three axes matter. For LRS-150, 159 mm is the long direction of the honeycomb roof, 97 mm is the short front-label and terminal-end span, and 30 mm is the case height normal to the broad roof. A proposed cavity should be reviewed in this orientation, including the terminal end and any fixing projections. The outer rectangle alone does not explain where contact with the part is acceptable.<\/p>\n<p>Before choosing materials, identify exposed features that need review: the terminal cover and screw area, controls, case edges, fixing features and openings. A protective support should not rely on the terminal strip, indicator lens or adjustment control as a load-bearing surface. Avoid an arrangement in which loose kit items can move into those features. This is an engineering review question, not permission to assume that every soft material or visibly cushioned carton is suitable.<\/p>\n<p>Request the applicable supplier and OEM requirements for contact materials, restraint, cleanliness and handling. Where a requirement depends on a transport mode or customer specification, record its source and the person responsible for accepting the design. This article provides no shock rating, vibration limit, electrostatic qualification, moisture barrier specification or universal cushion thickness. Such claims require their own relevant evidence.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"Protect_the_terminal_end_without_creating_a_new_problem\"><\/span>Protect the terminal end without creating a new problem<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Review the complete packed configuration, not just the empty insert. Check whether the intended support keeps the unit from moving toward its terminal end, whether another unit can contact it, and whether accessories remain in their intended compartments. Preserve access to the identification information needed at dispatch without moving a manufacturer&#8217;s label or applying an unapproved replacement label to the component.<\/p>\n<p>Do not put screws, brackets or loose cable ends beside the terminal cover merely because they fit in the same cavity. Keep the accessory package identified separately and linked to the packing list. If an approved kit requires an accessory near the supply, the protective arrangement must account for that accessory&#8217;s shape and possible movement. A packing photograph should make the arrangement understandable before the lid hides it.<\/p>\n<p>The export-packing illustration below shows a disconnected LRS-150-12 beside an open carton. It demonstrates the review context, not a tested or manufacturer-approved material selection. The supply has no external wiring and is not installed in a machine. A detached nominal 35 mm DIN-rail sample provides visual size context; this chassis supply is not mounted on it. The rail is not a calibrated inspection, a packing-clearance measurement or a dimensional acceptance record.<\/p>\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"1536\" height=\"1024\" src=\"https:\/\/i1.wp.com\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/02-application-export-packing.png?quality=85&strip=all\" alt=\"Power Supply Shipping Packaging: Protect Terminals and Keep OEM Shipment Evidence  title=\" class=\"wp-image-18600\" power supply shipping packaging: protect terminals and keep oem shipment evidence title =\"\" srcset=\"https:\/\/i1.wp.com\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/02-application-export-packing.png?quality=85&strip=all 1536w, https:\/\/i1.wp.com\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/02-application-export-packing-300x200.png?quality=85&strip=all 300w, https:\/\/i1.wp.com\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/02-application-export-packing-1024x683.png?quality=85&strip=all 1024w, https:\/\/i1.wp.com\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/02-application-export-packing-768x512.png?quality=85&strip=all 768w, https:\/\/i1.wp.com\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/02-application-export-packing-18x12.png?quality=85&strip=all 18w\" sizes=\"auto, (max-width: 1536px) 100vw, 1536px\" \/><\/figure>\n<h2><span class=\"ez-toc-section\" id=\"Link_the_packing_list_to_identifiable_contents\"><\/span>Link the packing list to identifiable contents<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Use the full model on the shipment record, not only \u201c150 W power supply\u201d or \u201cS series.\u201d Include the quantity and any applicable supplier-provided lot or serial reference that is actually present and required by the order. Do not invent a serial identifier, infer traceability from a generic label, or claim that the illustration establishes a particular commercial shipment.<\/p>\n<p>Keep the carton identifier connected to its contents. If a shipment is split across cartons or repacked at a depot, record the new relationship rather than relying on the original aggregate quantity. Document accessory packs, their identifiers where applicable, and the point at which the quantity is checked. This helps distinguish an item that was missing at dispatch from an item whose original evidence was lost during repacking.<\/p>\n<p>The record should also state what remains outside the check. For example, a quantity-and-condition review does not establish electrical performance or approve an adjustment setting. A label photograph identifies the observed markings; it does not convert those markings into a powered test result. Avoid broad checklist headings such as \u201call verified\u201d when the actual work covered only the shipment&#8217;s visible contents.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"Capture_a_small_useful_evidence_set_before_closure\"><\/span>Capture a small, useful evidence set before closure<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Plan photographs around questions the receiving team may need to answer. Retain an identifiable view of the component and its full-model label, a view of the packing arrangement, the accessory placement where relevant, and the closed carton identifier. Keep the records linked to the same shipment reference and distinguish the time before closure from the time after closure.<\/p>\n<p>A clear image of the terminal end before packing can help document its observed condition, but a photograph is not proof that hidden internal parts are undamaged. Similarly, a neat insert does not prove the arrangement survived a particular transport exposure. State the limits of the evidence, preserve original files where appropriate, and avoid rewriting a condition description after an exception without retaining the original observation.<\/p>\n<p>Keep the evidence set proportionate. Repeated close-ups without an overview can lose the relationship between unit, accessory and carton. Conversely, a distant overview may not establish which model was packed. A short capture instruction with named views and a shipment reference is more reproducible than asking each packer to take \u201ca few photos\u201d in a different way.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"Review_condition_at_the_receiving_handover\"><\/span>Review condition at the receiving handover<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>At receipt, identify the carton and record its observed outer condition before unpacking or discarding materials. Follow the agreed receiving process for opening it, counting contents and documenting the protective arrangement as found. Link any affected item to the carton and shipment references. Do not replace an objective observation with an unsupported diagnosis of who caused it.<\/p>\n<p>If an exception is visible, preserve the relevant carton and packing materials where the applicable procedure requires it. Record the observation, keep the affected goods from routine installation or release, and route the case to the responsible quality, purchasing or logistics contact. Do not power a suspect unit merely to obtain a quick \u201cworks\u201d result, and do not repair its enclosure, terminal cover or labels in an attempt to erase the transport evidence.<\/p>\n<p>The commercial-laundry OEM depot illustration is a second, distinct handover context. The exact loose supply remains disconnected on the receiving bench. The scene is not a completed inspection certificate, a genuine order record, a qualified carton design or proof that the unit is suitable for the background equipment. Its detached nominal 35 mm rail is contextual, not a receiving measurement or a mounting arrangement.<\/p>\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"1536\" height=\"1024\" src=\"https:\/\/i1.wp.com\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/03-application-depot-receipt.png?quality=85&strip=all\" alt=\"Power Supply Shipping Packaging: Protect Terminals and Keep OEM Shipment Evidence  title=\" class=\"wp-image-18601\" power supply shipping packaging: protect terminals and keep oem shipment evidence title =\"\" srcset=\"https:\/\/i1.wp.com\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/03-application-depot-receipt.png?quality=85&strip=all 1536w, https:\/\/i1.wp.com\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/03-application-depot-receipt-300x200.png?quality=85&strip=all 300w, https:\/\/i1.wp.com\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/03-application-depot-receipt-1024x683.png?quality=85&strip=all 1024w, https:\/\/i1.wp.com\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/03-application-depot-receipt-768x512.png?quality=85&strip=all 768w, https:\/\/i1.wp.com\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/03-application-depot-receipt-18x12.png?quality=85&strip=all 18w\" sizes=\"auto, (max-width: 1536px) 100vw, 1536px\" \/><\/figure>\n<h2><span class=\"ez-toc-section\" id=\"Use_a_specific_exception_record_rather_than_a_vague_rejection\"><\/span>Use a specific exception record rather than a vague rejection<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>An actionable exception describes what was observed and which evidence belongs to it. Separate outer-carton deformation, displaced packing, accessory discrepancy, enclosure marks and terminal-area concerns into distinct observations when those observations actually exist. Include a location or view reference, the affected quantity, the time of the observation and the current hold status under the organisation&#8217;s procedure.<\/p>\n<p>Do not infer an electrical defect from a carton mark alone, or declare a supply electrically acceptable because its exterior looks unchanged. The authorised disposition may require further inspection, supplier review or a separate test process. Keep that decision separate from the initial logistics record and retain the link between the observation and its later disposition.<\/p>\n<p>When a depot repacks goods for onward delivery, make the transition explicit. Record the new packing arrangement and carton identity, retain the incoming condition record and identify which items moved into the new carton. Otherwise, a later receiving team may be shown the original dispatch photographs even though those photographs no longer describe the carton they opened.<\/p>\n<h2><span class=\"ez-toc-section\" id=\"Keep_packaging_evidence_separate_from_electrical_release\"><\/span>Keep packaging evidence separate from electrical release<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>For LRS-150-12, the visible label, terminal cover and adjustment control are identification or condition features in this shipping workflow. Do not operate the adjustment control during a logistics condition check unless an applicable, authorised procedure specifically calls for it. The article&#8217;s nominal label readings are not a substitute for the ordered revision&#8217;s electrical instructions, local supply information or equipment acceptance requirements. In particular, differing photo, PDF and webpage input descriptions must be clarified for the ordered revision before any electrical release; this article does not decide an operating range.<\/p>\n<p>An OEM should therefore keep two separate decisions: whether the shipment&#8217;s condition and contents have been dispositioned, and whether the supply may enter the electrical assembly and commissioning process. A good shipment record supports the first decision. It does not settle load suitability, installation, protective arrangements, input configuration or system compliance.<\/p>\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"1536\" height=\"1024\" src=\"https:\/\/i1.wp.com\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/04-engineering-packing-evidence.png?quality=85&strip=all\" alt=\"Power Supply Shipping Packaging: Protect Terminals and Keep OEM Shipment Evidence  title=\" class=\"wp-image-18602\" power supply shipping packaging: protect terminals and keep oem shipment evidence title =\"\" srcset=\"https:\/\/i1.wp.com\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/04-engineering-packing-evidence.png?quality=85&strip=all 1536w, https:\/\/i1.wp.com\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/04-engineering-packing-evidence-300x200.png?quality=85&strip=all 300w, https:\/\/i1.wp.com\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/04-engineering-packing-evidence-1024x683.png?quality=85&strip=all 1024w, https:\/\/i1.wp.com\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/04-engineering-packing-evidence-768x512.png?quality=85&strip=all 768w, https:\/\/i1.wp.com\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/04-engineering-packing-evidence-18x12.png?quality=85&strip=all 18w\" sizes=\"auto, (max-width: 1536px) 100vw, 1536px\" \/><\/figure>\n<h2><span class=\"ez-toc-section\" id=\"Key_Takeaways\"><\/span>Key Takeaways<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<ul><li>Match the packing review to the actual shipment scope and complete model.<\/li><li>Use the real enclosure and terminal geometry; a body envelope alone is not a protective packing design.<\/li><li>Confirm the applicable materials and handling requirements instead of inventing shock, moisture or electrostatic claims.<\/li><li>Link unit, accessory, carton and handover evidence through a usable shipment reference.<\/li><li>Preserve transport exceptions as observations and route their disposition through the responsible owner.<\/li><li>Keep quantity and visible-condition checks separate from electrical release and commissioning.<\/li><\/ul>\n<h2><span class=\"ez-toc-section\" id=\"Conclusion\"><\/span>\u03a3\u03cd\u03bd\u03b1\u03c8\u03b7<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Effective power supply shipping packaging is a controlled handover, not just a carton with cushioning. Review where the actual component may contact its support, protect exposed features through an evidence-backed arrangement, and keep the packing list connected to what was dispatched and received. For a WEHO LRS-150 order, <a href=\"https:\/\/www.wehopower.com\/el\/contact\/\">contact WEHO<\/a> with the complete model, quantity, shipment scope and specific packaging or condition question. Request the applicable current requirements, and keep any transport qualification or electrical acceptance claim tied to its own supporting evidence.<\/p>\n<section class=\"weho-faq\" aria-labelledby=\"weho-faq-heading\">\n<h2 id=\"weho-faq-heading\"><span class=\"ez-toc-section\" id=\"Frequently_Asked_Questions\"><\/span>\u03a3\u03c5\u03c7\u03bd\u03ad\u03c2 \u0395\u03c1\u03c9\u03c4\u03ae\u03c3\u03b5\u03b9\u03c2<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<article class=\"weho-faq-item\">\n<h3><span class=\"ez-toc-section\" id=\"Does_the_LRS-150_body_size_define_an_approved_shipping_carton\"><\/span>Does the LRS-150 body size define an approved shipping carton?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>No. The current159\u00d797\u00d730mm dimensions identify the supply&#8217;s enclosure axes. Carton quantity, support\/contact arrangement, materials, accessories and route requirements must be confirmed for the actual shipment. A body envelope or general catalogue packing entry is not a protective-design qualification.<\/p>\n<\/article>\n<article class=\"weho-faq-item\">\n<h3><span class=\"ez-toc-section\" id=\"Can_a_clear_terminal_cover_carry_the_packing_restraint_load\"><\/span>Can a clear terminal cover carry the packing restraint load?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Do not assume it can. Review the actual terminal end, controls and fixing features with the applicable packaging instructions. The support and restraint arrangement should be assessed without using a terminal cover or control as an assumed load-bearing surface.<\/p>\n<\/article>\n<article class=\"weho-faq-item\">\n<h3><span class=\"ez-toc-section\" id=\"Which_photographs_are_useful_before_the_carton_is_closed\"><\/span>Which photographs are useful before the carton is closed?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Keep identifiable model\/label, packing-arrangement, relevant accessory-placement and carton-identifier views linked to the same shipment reference. State what each observation covers; photographs do not establish hidden internal condition or transport-test qualification.<\/p>\n<\/article>\n<article class=\"weho-faq-item\">\n<h3><span class=\"ez-toc-section\" id=\"What_should_receiving_staff_do_with_a_visible_transport_exception\"><\/span>What should receiving staff do with a visible transport exception?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Record the observed condition before discarding or changing the packing, identify the affected carton and item, retain relevant evidence under the applicable process and route the disposition to the responsible owner. Do not repair or power a suspect supply merely to erase evidence or obtain a quick release.<\/p>\n<\/article>\n<article class=\"weho-faq-item\">\n<h3><span class=\"ez-toc-section\" id=\"Do_the_illustrations_show_WEHO-approved_packaging_or_genuine_shipment_records\"><\/span>Do the illustrations show WEHO-approved packaging or genuine shipment records?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>No. They are newly rendered, disconnected logistics examples with the exact LRS-150-12 product identity. The generic carton and paperwork are illustrative, not manufacturer-approved material selections, actual order records or transport qualification. The detached nominal35mmDINrail is contextual, not a calibrated inspection or a mounting arrangement for this chassis supply.<\/p>\n<\/article>\n<article class=\"weho-faq-item\">\n<h3><span class=\"ez-toc-section\" id=\"Does_an_intact_delivery_authorise_electrical_installation_or_energizing\"><\/span>Does an intact delivery authorise electrical installation or energizing?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>No. Quantity and visible-condition disposition are separate from electrical acceptance. Clarify differing photo\/PDF\/webpage input descriptions for the ordered revision, then confirm loads, installation and equipment acceptance through the applicable authorised process. The label photograph is identification evidence, not a powered test.<\/p>\n<\/article>\n<\/section>","protected":false},"excerpt":{"rendered":"<p>Review power supply shipping packaging: protect exposed terminals, link units and cartons to packing lists, and preserve OEM dispatch-to-receipt condition evidence.<\/p>","protected":false},"author":1,"featured_media":18599,"parent":0,"menu_order":41,"comment_status":"","ping_status":"","template":"","format":"standard","meta":{"_acf_changed":false,"_joinchat":[],"footnotes":""},"news_category":[149],"class_list":["post-18603","news","type-news","status-publish","format-standard","has-post-thumbnail","hentry","news_category-blog","entry"],"acf":[],"post_mailing_queue_ids":[],"_links":{"self":[{"href":"https:\/\/www.wehopower.com\/el\/wp-json\/wp\/v2\/news\/18603","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.wehopower.com\/el\/wp-json\/wp\/v2\/news"}],"about":[{"href":"https:\/\/www.wehopower.com\/el\/wp-json\/wp\/v2\/types\/news"}],"author":[{"embeddable":true,"href":"https:\/\/www.wehopower.com\/el\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.wehopower.com\/el\/wp-json\/wp\/v2\/comments?post=18603"}],"version-history":[{"count":1,"href":"https:\/\/www.wehopower.com\/el\/wp-json\/wp\/v2\/news\/18603\/revisions"}],"predecessor-version":[{"id":18609,"href":"https:\/\/www.wehopower.com\/el\/wp-json\/wp\/v2\/news\/18603\/revisions\/18609"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.wehopower.com\/el\/wp-json\/wp\/v2\/media\/18599"}],"wp:attachment":[{"href":"https:\/\/www.wehopower.com\/el\/wp-json\/wp\/v2\/media?parent=18603"}],"wp:term":[{"taxonomy":"news_category","embeddable":true,"href":"https:\/\/www.wehopower.com\/el\/wp-json\/wp\/v2\/news_category?post=18603"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}