9000W PID Adjustable Voltage Battery Charger for Lead-Acid & Lithium Battery Packs With PFC
Extreme Scale 13.8V/14.6V/27.6V/29.2V/55.2V/58.4V Power: Designed for massive industrial battery arrays. These units offer broad voltage adjustment ranges (e.g., 15-30V, 30-60V, 55-110V) to precisely charge 13.8V Lead-Acid float or 58.4V LiFePO4 packs.
Modbus Communication Integration: Features Modbus protocol via 485 communication for smart grid and factory automation integration. Supports customizable remote switch and auxiliary 12V power outputs.
Reliable Constant Current Architecture: Utilizes professional CC protection that shuts down and locks output if parameters fall out of safe range, protecting high-value lithium cells from degradation. Heavy-Industrial Durability: Built into a robust 432x179x242mm chassis with 93% maximum efficiency. Operates reliably from -20°C to +80°C in high-demand environments.
- Descripción
| Modelo | HPS-9000-24 | HPS-9000-30 | HPS-9000-36 | HPS-9000-48 | HPS-9000-60 | HPS-9000-110 | HPS-9000-220 |
| voltaje CC | 24V | 30V | 36V | 48V | 60V | 110V | 220V |
| Corriente nominal | 337.5A | 270A | 225A | 168.8A | 135A | 73.6A | 36.8A |
| Rango actual | 0-337.5A | 0-270A | 0-225A | 0-168.8A | 0-135A | 0-73.6A | 0-36.8A |
| Potencia nominal | 9000W | ||||||
| Onda | 500mV | 500mV | 500mV | 600mV | 600mV | 1000mV | 1500mV |
| Rango óptimo de corriente constante | 12-24V | 15-30V | 18-36V | 24-48V | 30-60V | 55-110V | 110-220V |
| Precisión de tensión nominal | ±1.0% | ||||||
| Regulación de línea | ±1.0% | ||||||
| Regulación de carga | ±1.0% | ||||||
| Tiempo de inicio y subida | 1500mS, 700mS/230VAC (completamente cargado) | ||||||
| Rango de voltaje | 95-190 VCA (corriente de salida 50%), 195-265 VCA (corriente de salida 100%) | ||||||
| Rango de frecuencia | 45Hz-65Hz | ||||||
| Factor de potencia | PF≥0.99/230VAC (completamente cargado) | ||||||
| Eficiencia (MÁXIMA) | 90% | 90% | 91.5% | 92% | 92% | 92.5% | 93% |
| actual | <56A | ||||||
| Corriente de fuga | <3,0 mA/240 VCA | ||||||
| Cortocircuito | When the constant curenitis entered and the votageis lower tian 10%of the rated votage,the outout is shut down and ockedafter1second,and recovers after restating. | ||||||
| Sobrecorriente | The user can set the over-current value to delay the oufput for5 seconds and then shut down the output,and then resume after restarting. | ||||||
| Presión demasiada | Los usuarios pueden configurar el valor de sobretensión para apagar el voltaje de salida y restaurarlo después del reinicio. | ||||||
| Sobre temperatura | Apague la salida, recupere o reinicie automáticamente después de que baje la temperatura. | ||||||
| Ajuste del voltaje de salida | 0-26,4 V | 0-33V | 0-39,6V | 0-52,8 V | 0-66V | 0-121V | 0-242V |
| Ajuste de corriente constante de salida | 0-337.5A | 0-270A | 0-225A | 0-168.8A | 0-135A | 0-73.6A | 0-36.8A |
| 485Comunicaciones | Protocolo de comunicación MODBUS | ||||||
| fuente de alimentación auxiliar aislada | 12V0.5A (necesita personalización) | ||||||
| Interruptor remoto de salida | Default power on,high level power off(5V-12V)(Need customization) | ||||||
| Salida de señal de alarma | Power Good Signal(Dry Contact≤36V,0.1A) (Need customization) | ||||||
| Temperatura de funcionamiento | -20-+60℃ | ||||||
| Humedad de funcionamiento | -20-90%RH No condensation | ||||||
| Temperatura y humedad de almacenamiento | -40-+85℃,10-95%RH No condensation | ||||||
| Resistencia a las vibraciones | 10-500Hz,2G10 Min/cycle,X、Y、Z60 Min | ||||||
| resistencia de aislamiento | Entrada a salida: 100Mhms/500VDC/25°C/70%RH | ||||||
| Resistencia a la presión | /P-O/P:2KVAC IP-FG:2KVACO/P-FG:0.5KVAC | ||||||
| tamaño | 432×179×242mm | ||||||
| peso neto | 12.5 kg | ||||||
¿Cuáles son los mejores productos de fuentes de alimentación para su empresa?
Impulsa tu negocio con productos de suministro de energía de calidad WEHO.
Pregúntale a un experto