MDR series ac 220v to dc power supply 10w switching power supply

MDR-10 is a slim line DIN rail Class I switching power supply.
Designed with a fully isolated plastic case to prevent user contact and the risk of shock.Featuring up to 88% efficiency this series can be cooled using only free air convection up to 60°C which significantly increases the reliability and lifetime of the power supply.Other standard features include its low no-load power consumption, to save energy, short circuit, overload, and over voltage protections, and DC OK relay contact with LED indicator for monitoring the PSU status.If you have any questions, please do not hesitate to contact us at Email: [email protected]

다운로드 견적을 요청하십시오

설명

사양 및 모델

모델	MDR-10-5	MDR-10-12	MDR-10-15	MDR-10-24
DC 전압	5V	12V	15V	24V
Rated Current	2A	0.84A	0.67A	0.42A
Current Range	0 - 2A	0-0.84A	0-0.67A	0-0.42A
Rated Power	15W	10W	10W	10W
Ripple & Noise	80mVp-p	120mVp-p	120mVp-p	150mVp-p
Voltage Adj. Range	-5%,+10%	-8%,+10%	±10%	±10%
전압 허용 오차	±2%	±1%	±1%	±1%
Setup, Rise Time	500ms, 30ms/230VAC 1000ms, 30ms/115VAC at full load
Hold Up Time	50ms/230VAC 20ms/115VAC at full load
입력
전압 범위	88~264VAC 47~63Hz; 124~370VDC
AC 전류	0.05A/115V 0.35A/ 230V
능률	76%	80%	81%	84%
Inrush Current	Cold start 20A/115V 40A/230V
Leakage Current	<1mA/240VAC
보호
Over Load	105%~160%
Over Load	Protection type: Constant current limiting, recovers automatically after fault condition is removed
Over Voltage	115%~135%
Over Voltage	Protection type: Shut down o/p voltage, re-power on to recover
ENVIRONMENT
Working Temp., Humidity	-20°C~+60°C; 20%~90%RH
Storage Temp., Humidity	-40°C~+85°C; 10%~95%RH
Temp. Coefficient	±0.03%/°C (0~50°C)
진동	10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes
내전압	I/P-O/P: 3KVAC
절연 저항	I/P-O/P: 100M Ohms / 500VDC
STANDARD
안전 표준	설계는 UL 60950-1, TUV EN 60950-1, EN 50178을 참조하십시오.
EMC 표준	Design refer to EN55011, EN55022, EN61000-3-2, -3, EN61000-4-2, 3, 4, 5, 6, 8, 11, ENV50204, EN55024, EN61000-6-2, EN61204-3
차원	22.590100mm(WHL)
무게	0.20Kg
포장	60pcs/carton