9000W PID Adjustable Voltage Battery Charger for Lead-Acid & Lithium Battery Packs With PFC
Extreme Scale 13.8V/14.6V/27.6V/29.2V/55.2V/58.4V Power: Designed for massive industrial battery arrays. These units offer broad voltage adjustment ranges (e.g., 15-30V, 30-60V, 55-110V) to precisely charge 13.8V Lead-Acid float or 58.4V LiFePO4 packs.
Modbus Communication Integration: Features Modbus protocol via 485 communication for smart grid and factory automation integration. Supports customizable remote switch and auxiliary 12V power outputs.
Reliable Constant Current Architecture: Utilizes professional CC protection that shuts down and locks output if parameters fall out of safe range, protecting high-value lithium cells from degradation. Heavy-Industrial Durability: Built into a robust 432x179x242mm chassis with 93% maximum efficiency. Operates reliably from -20°C to +80°C in high-demand environments.
- 설명
| 모델 | HPS-9000-24 | HPS-9000-30 | HPS-9000-36 | HPS-9000-48 | HPS-9000-60 | HPS-9000-110 | HPS-9000-220 |
| 직류 전압 | 24V | 30V | 36V | 48V | 60V | 110V | 220V |
| 정격 전류 | 337.5A | 270A | 225A | 168.8A | 135A | 73.6A | 36.8A |
| 현재 범위 | 0-337.5A | 0-270A | 0-225A | 0-168.8A | 0-135A | 0-73.6A | 0-36.8A |
| 정격 출력 | 9000W | ||||||
| 리플 | 500mV | 500mV | 500mV | 600mV | 600mV | 1000mV | 1500mV |
| 정전류 최적 범위 | 12-24V | 15-30V | 18-36V | 24-48V | 30-60V | 55-110V | 110-220V |
| 정격 전압 정확도 | ±1.0% | ||||||
| 라인 규제 | ±1.0% | ||||||
| 부하 조절 | ±1.0% | ||||||
| 시작 및 상승 시간 | 1500mS,700mS/230VAC(완전 부하) | ||||||
| 전압 범위 | 95-190VAC(출력전류 50%),195-265VAC(출력전류 100%) | ||||||
| 주파수 범위 | 45Hz~65Hz | ||||||
| 역률 | PF≥0.99/230VAC(완전 부하) | ||||||
| 효율성(최대) | 90% | 90% | 91.5% | 92% | 92% | 92.5% | 93% |
| Accurent | <56A | ||||||
| 누설 전류 | <3.0mA/240VAC | ||||||
| 단락 | When the constant curenitis entered and the votageis lower tian 10%of the rated votage,the outout is shut down and ockedafter1second,and recovers after restating. | ||||||
| 과전류 | The user can set the over-current value to delay the oufput for5 seconds and then shut down the output,and then resume after restarting. | ||||||
| 지나친 압력 | 사용자는 과전압 값을 설정하여 출력 전압을 차단하고 재시작 후 복원할 수 있습니다. | ||||||
| 과열 | 출력을 차단하고 온도가 떨어지면 자동으로 복구하거나 다시 시작합니다. | ||||||
| 출력 전압 조정 | 0-26.4V | 0-33V | 0-39.6V | 0-52.8V | 0-66V | 0-121V | 0-242V |
| 출력 정전류 조정 | 0-337.5A | 0-270A | 0-225A | 0-168.8A | 0-135A | 0-73.6A | 0-36.8A |
| 485커뮤니케이션 | MODBUS 통신 프로토콜 | ||||||
| 절연 보조 전원 공급 장치 | 12V0.5A(맞춤화 필요) | ||||||
| 출력 원격 스위치 | Default power on,high level power off(5V-12V)(Need customization) | ||||||
| 경보신호출력 | 전력 양호 신호(Dry Contact≤36V,0.1A)(맞춤 설정 필요) | ||||||
| 작동 온도 | -20-+60℃ | ||||||
| 작동 습도 | -20-90%RH 결로 없음 | ||||||
| 보관 온도 및 습도 | -40-+85℃,10-95%RH No condensation | ||||||
| 진동 저항 | 10-500Hz,2G10분/주기,X、Y、Z60분 | ||||||
| 절연 저항 | 입력에서 출력으로: 100Mhms/500VDC/25°C/70%RH | ||||||
| 내압성 | /P-O/P:2KVAC IP-FG:2KVACO/P-FG:0.5KVAC | ||||||
| 크기 | 432×179×242mm | ||||||
| 순중량 | 12.5 kg | ||||||
