| 모델 | NDR-75-12 | NDR-75-24 | NDR-75-48 |
| DC 출력 전압 | 12V | 24V | 48V |
| Rated output current | 6.3A | 3.2A | 1.6A |
| Output current range | 0-6.3A | 0-3.2A | 0-1.6A |
| Wave and noise(Note:3) | 80mVp-p | 120mVp-p | 150mVp-p |
| Inlet stability(Note:4) | ±0.5% | ±0.5% | ±0.5% |
| Load stability(Note:5) | ±1% | ±1% | ±1% |
| DC output power | 75.6W | 76.8W | 76.8W |
| 능률 | 86% | 88% | 89% |
| DC 전압의 조정 가능 범위 | 10.8~13.2V | 21.6~26.4V% | 43.2~52.8V% |
| AC input voltage range | 85~264VAC 47~63Hz;120~370VDC | ||
| 입력 전류 | 1.8A/115V 0.9A/230V | ||
| 과부하 보호 | 105%~150% 유형: 펄스 딸꾹질 종료 재설정: Tuto 복구 | ||
| Over-voltage protection | 13.8~16.2V | 27.6~26.4V | 43.2~52.8V |
| Setup, rise , hold up time | 1200ms, 60ms, 60ms/230V | ||
| 전압을 견딜 수 있습니다 | Input and output internal: Input and encolsur: 1.5KvAC, Output and enclosure: 0.5KvAC | ||
| 절연 저항 | Input and output internal: Input and enclosure, Output and enclosure:500VDC/100MΩ | ||
| 작동 온도 및 습도 | -10°c~+50°c(Refer to output derating curve), 20%~90%RH | ||
| Overall dimension | 32×125.2×102mm | ||
| 무게 | 0.51Kgs | ||
| Safety standards | CE | ||
NDR dinrail 75W AC to DC single output switching power supply
NDR-75 is a slim line DIN rail Class I switching power supply.
Designed with a fully isolated plastic case to prevent user contact and the risk of shock.Featuring up to 88% efficiency this series can be cooled using only free air convection up to 60°C which significantly increases the reliability and lifetime of the power supply.Other standard features include its low no-load power consumption, to save energy, short circuit, overload, and over voltage protections, and DC OK relay contact with LED indicator for monitoring the PSU status.If you have any questions, please do not hesitate to contact us at Email: [email protected]
- 설명
It is complied with the international CE ROHS
Can be installed on DIN rail TS-35/7.5 or 15
This product has a universal AC input that is full range
이 제품은 가격도 저렴하고 믿음직스럽습니다.
100% 완전 부하 번인 테스트
