{"id":19971,"date":"2026-10-23T16:44:12","date_gmt":"2026-10-23T08:44:12","guid":{"rendered":"https:\/\/www.wehopower.com\/news\/power-supply-reverse-current-returned-energy\/"},"modified":"2026-10-23T16:44:12","modified_gmt":"2026-10-23T08:44:12","slug":"power-supply-reverse-current-returned-energy","status":"publish","type":"news","link":"https:\/\/www.wehopower.com\/ko\/news\/power-supply-reverse-current-returned-energy\/","title":{"rendered":"Power Supply Reverse Current: Define Where Returned Energy Goes"},"content":{"rendered":"<div class=\"weho-blog-content\" id=\"weho-article-27\" data-weho-article-id=\"27\">\n<p><strong>Reverse current must have a defined path and a documented limit.<\/strong> A DC power supply&#8217;s forward output-current rating does not establish its ability to absorb energy from a motor drive, another source, or charged downstream capacitors. Before approving an OEM power branch, identify when the output can be driven from elsewhere, what prevents unwanted backfeed, and what absorbs any returned energy.<\/p>\n<p>This is a system-interface decision. A blocking device may protect the upstream source while leaving excess energy on the downstream bus. A higher-wattage source, a fuse, or an output-overvoltage protection label does not by itself resolve that energy balance.<\/p>\n<details class=\"article-toc\" open=\"\">\n<summary>Article sections<\/summary>\n<nav class=\"toc-links\" aria-label=\"Article sections\"><a href=\"#separate-the-three-events-commonly-called-backfeed\">Separate the three events commonly called backfeed<\/a><a href=\"#calculate-what-a-capacitor-could-absorb-in-an-idealized-case\">Calculate what a capacitor could absorb in an idealized case<\/a><a href=\"#assign-blocking-and-absorption-as-separate-responsibilities\">Assign blocking and absorption as separate responsibilities<\/a><a href=\"#use-a-state-matrix-before-connecting-a-candidate\">Use a state matrix before connecting a candidate<\/a><a href=\"#ndr-source-interface-review\">Review NDR-240-24 as a source-side interface<\/a><a href=\"#request-source-interface-evidence-before-a-purchase-decision\">Request source-interface evidence before a purchase decision<\/a><\/nav>\n<\/details>\n<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_86 counter-hierarchy ez-toc-counter ez-toc-grey ez-toc-container-direction\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\" style=\"cursor:inherit\">\ubaa9\ucc28<\/p>\n<span class=\"ez-toc-title-toggle\"><a href=\"#\" class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" aria-label=\"\ubaa9\ucc28 \ud1a0\uae00\"><span class=\"ez-toc-js-icon-con\"><span class=\"\"><span class=\"eztoc-hide\" style=\"display:none;\">\ube44\ub140\uc7a5<\/span><span class=\"ez-toc-icon-toggle-span\"><svg style=\"fill: #999;color:#999\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" class=\"list-377408\" width=\"20px\" height=\"20px\" viewbox=\"0 0 24 24\" fill=\"none\"><path d=\"M6 6H4v2h2V6zm14 0H8v2h12V6zM4 11h2v2H4v-2zm16 0H8v2h12v-2zM4 16h2v2H4v-2zm16 0H8v2h12v-2z\" fill=\"currentColor\"><\/path><\/svg><svg style=\"fill: #999;color:#999\" class=\"arrow-unsorted-368013\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"10px\" height=\"10px\" viewbox=\"0 0 24 24\" version=\"1.2\" baseprofile=\"tiny\"><path d=\"M18.2 9.3l-6.2-6.3-6.2 6.3c-.2.2-.3.4-.3.7s.1.5.3.7c.2.2.4.3.7.3h11c.3 0 .5-.1.7-.3.2-.2.3-.5.3-.7s-.1-.5-.3-.7zM5.8 14.7l6.2 6.3 6.2-6.3c.2-.2.3-.5.3-.7s-.1-.5-.3-.7c-.2-.2-.4-.3-.7-.3h-11c-.3 0-.5.1-.7.3-.2.2-.3.5-.3.7s.1.5.3.7z\"\/><\/svg><\/span><\/span><\/span><\/a><\/span><\/div>\n<nav><ul class='ez-toc-list ez-toc-list-level-1' ><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/www.wehopower.com\/ko\/news\/power-supply-reverse-current-returned-energy\/#Separate_the_three_events_commonly_called_backfeed\" >Separate the three events commonly called backfeed<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/www.wehopower.com\/ko\/news\/power-supply-reverse-current-returned-energy\/#Calculate_what_a_capacitor_could_absorb_in_an_idealized_case\" >Calculate what a capacitor could absorb in an idealized case<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/www.wehopower.com\/ko\/news\/power-supply-reverse-current-returned-energy\/#Assign_blocking_and_absorption_as_separate_responsibilities\" >Assign blocking and absorption as separate responsibilities<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/www.wehopower.com\/ko\/news\/power-supply-reverse-current-returned-energy\/#Use_a_state_matrix_before_connecting_a_candidate\" >Use a state matrix before connecting a candidate<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/www.wehopower.com\/ko\/news\/power-supply-reverse-current-returned-energy\/#Review_NDR-240-24_as_a_source-side_interface\" >Review NDR-240-24 as a source-side interface<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/www.wehopower.com\/ko\/news\/power-supply-reverse-current-returned-energy\/#Request_source-interface_evidence_before_a_purchase_decision\" >Request source-interface evidence before a purchase decision<\/a><\/li><\/ul><\/nav><\/div>\n<h2 id=\"separate-the-three-events-commonly-called-backfeed\"><span class=\"ez-toc-section\" id=\"Separate_the_three_events_commonly_called_backfeed\"><\/span>Separate the three events commonly called backfeed<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>First define positive current as flowing from the selected source to its load. Current entering the source&#8217;s positive output terminal is negative under that convention. Record the measurement direction so a minus sign in a report cannot be mistaken for a probe error.<\/p>\n<div class=\"weho-table-wrap\" tabindex=\"0\" role=\"region\" aria-label=\"Engineering comparison table\">\n<table>\n<thead>\n<tr>\n<th scope=\"col\">Event<\/th>\n<th scope=\"col\">What can drive the node<\/th>\n<th scope=\"col\">Question to resolve<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Another source remains energized<\/td>\n<td>A battery, backup rail, or separate supply holds the shared node above the inactive source output.<\/td>\n<td>Does each connection block the prohibited current under powered and unpowered conditions?<\/td>\n<\/tr>\n<tr>\n<td>The load returns energy<\/td>\n<td>A regenerating drive or another energy-producing subsystem raises its connected DC bus.<\/td>\n<td>Which rated subsystem absorbs, stores, or redirects that energy?<\/td>\n<\/tr>\n<tr>\n<td>The source loses input first<\/td>\n<td>Charged load-side capacitance remains energized while upstream circuitry decays.<\/td>\n<td>Are reverse voltage and current permitted during that shutdown sequence?<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p><a href=\"https:\/\/www.ti.com\/document-viewer\/lit\/html\/SSZTBS2\/GUID-5C17313E-0EAE-47C6-99C8-D37BCC89C5CC\" target=\"_blank\" rel=\"noopener noreferrer\">Texas Instruments describes reverse current<\/a> arising when an output is held above its input, including input-power loss and source switching. The internal path depends on the device. Do not infer blocking from the presence of a MOSFET or from the words \u201cpower switch.\u201d<\/p>\n<p>Motor operation needs particular attention. <a href=\"https:\/\/product.tdk.com\/en\/contact\/faq\/power-supplies-0025.html\" target=\"_blank\" rel=\"noopener noreferrer\">TDK&#8217;s explanation of motor-drive effects on switching supplies<\/a> discusses back electromotive force and disturbance of the source output. The motor, drive, braking arrangement, and source therefore need a coordinated review; a general auxiliary-supply specification cannot substitute for drive-system requirements.<\/p>\n<h2 id=\"calculate-what-a-capacitor-could-absorb-in-an-idealized-case\"><span class=\"ez-toc-section\" id=\"Calculate_what_a_capacitor_could_absorb_in_an_idealized_case\"><\/span>Calculate what a capacitor could absorb in an idealized case<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Suppose a hypothetical DC bus starts at 24.0 V and contains 4,700 \u00b5F of effective capacitance. Assume one load event returns 1.50 J, no other load consumes energy during the event, and no clamp or source absorbs it. Treat the capacitance as constant and ignore losses. This is an energy-screening example, not a WEHO test or a capacitor-bank design.<\/p>\n<p>Capacitor energy is E = \u00bdCV\u00b2. Adding returned energy gives <strong>V<sub>final<\/sub> = \u221a(V<sub>initial<\/sub>\u00b2 + 2E<sub>returned<\/sub>\/C)<\/strong>. Here, \u221a(24\u00b2 + 2 \u00d7 1.50 \/ 0.0047) is approximately <strong>34.85 V<\/strong>.<\/p>\n<p>If the project&#8217;s hypothetical upper bus limit is 28.0 V, the available energy headroom is <strong>\u00bd \u00d7 0.0047 \u00d7 (28\u00b2 \u2212 24\u00b2) = 0.4888 J<\/strong>. The 1.50 J event exceeds that headroom by 1.0112 J. The chosen 28 V is an assumed equipment limit, not a WEHO overvoltage setting.<\/p>\n<div class=\"weho-table-wrap\" tabindex=\"0\" role=\"region\" aria-label=\"Engineering comparison table\">\n<table>\n<thead>\n<tr>\n<th scope=\"col\">Calculation output<\/th>\n<th scope=\"col\">Result<\/th>\n<th scope=\"col\">Engineering implication<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Ideal bus voltage after one 1.50 J return<\/td>\n<td>34.85 V<\/td>\n<td>Capacitance alone does not keep this hypothetical bus below 28 V.<\/td>\n<\/tr>\n<tr>\n<td>Energy room between 24 V and 28 V<\/td>\n<td>0.4888 J<\/td>\n<td>The rest needs another permitted destination or a different system arrangement.<\/td>\n<\/tr>\n<tr>\n<td>Average returned power at two such events per second<\/td>\n<td>1.50 \u00d7 2 = 3.00 W<\/td>\n<td>A small average conceals a potentially unacceptable pulse and peak voltage.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<figure class=\"article-relation\"><picture><source media=\"(max-width:600px)\" srcset=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/27-mobile.svg\"><img fetchpriority=\"high\" src=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/27-desktop.svg\" width=\"1200\" height=\"675\" alt=\"Power Supply Reverse Current: Define Where Returned Energy Goes  title=\" loading=\"eager\" decoding=\"async\" power supply reverse current: define where returned energy goes title=\"\"><\/picture><figcaption>Original functional energy review. Values use the article\u2019s hypothetical constant-capacitance, lossless screening case; source sinking and an energy absorber are not assumed. Diagram labels of 0.489 J and 1.011 J round the calculated 0.4888 J headroom and 1.0112 J excess.<br \/>\n<a href=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/27-desktop.svg\" target=\"_blank\" rel=\"noopener\" class=\"diagram-original\" data-weho-link-role=\"view_original\">View full diagram \u2197<\/a><\/figcaption><\/figure>\n<p>Actual analysis needs minimum effective capacitance, starting voltage, event duration, repetition, load consumption, and the behavior of every connected source. Peak current and connection inductance also matter. Do not select a resistor, clamp, or bidirectional converter from the 3 W average alone.<\/p>\n<h2 id=\"assign-blocking-and-absorption-as-separate-responsibilities\"><span class=\"ez-toc-section\" id=\"Assign_blocking_and_absorption_as_separate_responsibilities\"><\/span>Assign blocking and absorption as separate responsibilities<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>For a backup-fed node, a suitable blocking arrangement can prevent current entering an inactive source. Its voltage rating, continuous current, leakage, voltage loss, thermal behavior, and response during transitions must match that branch. It also needs a defined operating state when its control power is missing.<\/p>\n<p><a href=\"https:\/\/www.ti.com\/lit\/ug\/tidua64\/tidua64.pdf\" target=\"_blank\" rel=\"noopener noreferrer\">TI&#8217;s reverse-current blocking design guide<\/a> demonstrates that switch orientation and back-to-back configuration change what is blocked. Its low-voltage reference circuits are explanatory examples, not ready-made protection designs for a 24 V cabinet. Verify the actual device and assembly documentation.<\/p>\n<p>For a regenerative load, ask the drive-system designer to identify the energy destination. Depending on the equipment, this could involve a rated braking arrangement, a compatible storage system, or a bidirectional stage specified for that task. Adding source blocking may be part of the arrangement, but it cannot make returned energy disappear.<\/p>\n<p>An overvoltage trip may stop a source from supplying further power without providing an energy sink. Likewise, galvanic isolation concerns the input-to-output relationship; it is not proof of output backfeed blocking. Keep these functions separate in the request for supplier evidence.<\/p>\n<h2 id=\"use-a-state-matrix-before-connecting-a-candidate\"><span class=\"ez-toc-section\" id=\"Use_a_state_matrix_before_connecting_a_candidate\"><\/span>Use a state matrix before connecting a candidate<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Give the source supplier and system integrator the same interface record. Include normal operation, source shutdown, backup takeover, load deceleration, fault recovery, and maintenance states. For each state, list which nodes stay energized and which current directions are allowed.<\/p>\n<div class=\"weho-table-wrap\" tabindex=\"0\" role=\"region\" aria-label=\"Engineering comparison table\">\n<table>\n<thead>\n<tr>\n<th scope=\"col\">Required field<\/th>\n<th scope=\"col\">Record or request<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Source interface<\/td>\n<td>Exact model\/revision; permitted externally applied output voltage and reverse current, with duration and power state.<\/td>\n<\/tr>\n<tr>\n<td>Returned event<\/td>\n<td>Energy, peak current, duration, repetition, and initial bus voltage, with measurement or calculation basis.<\/td>\n<\/tr>\n<tr>\n<td>System limits<\/td>\n<td>Operating and absolute voltage limits of all connected receivers; agreed margin and uncertainty.<\/td>\n<\/tr>\n<tr>\n<td>Blocking assembly<\/td>\n<td>Direction, enabled\/disabled behavior, transient response, ratings, losses, and failure assumptions.<\/td>\n<\/tr>\n<tr>\n<td>Energy destination<\/td>\n<td>Identified absorbing or storage subsystem and its applicable pulse, continuous, and thermal ratings.<\/td>\n<\/tr>\n<tr>\n<td>Verification<\/td>\n<td>Voltage\/current measurement points, sign convention, sequence, limits, and responsible reviewer.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>\uadf8\ub9cc\ud07c <a href=\"https:\/\/www.wehopower.com\/ko\/news\/redundant-power-supply-n-plus-one-din-rail-systems\/\" data-weho-link-kind=\"guide\">parallel versus redundant power-supply guide<\/a> explains capacity after source loss. That calculation remains separate from reverse-energy control. The <a href=\"https:\/\/www.wehopower.com\/ko\/news\/24v-dc-branch-protection-selectivity\/\" data-weho-link-kind=\"guide\">DC branch-protection guide<\/a> addresses another boundary: interrupting faults and protecting the distribution path.<\/p>\n<p>Do not deliberately back-drive an ordinary sample until its permitted conditions and the test protection are established. Qualification should capture source-terminal and load-bus voltage with current direction during the agreed sequence. Preserve the tested assembly identity; a different drive firmware, deceleration setting, or backup connection may create a different event.<\/p>\n<section class=\"weho-model-review\" aria-labelledby=\"ndr-source-interface-review\" data-weho-model=\"NDR-240-24\">\n<h2 id=\"ndr-source-interface-review\"><span class=\"ez-toc-section\" id=\"Review_NDR-240-24_as_a_source-side_interface\"><\/span>Review NDR-240-24 as a source-side interface<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<div class=\"model-review-layout\">\n<div class=\"model-review-intro\">\n<p>If the proposed auxiliary rail uses the <a href=\"https:\/\/www.wehopower.com\/ko\/product\/ndr-dinrail-240w-ac-to-dc-single-output-switching-power-supply\/\" data-weho-link-kind=\"product_detail\">WEHO NDR-240-24 DIN rail power supply<\/a>, identify it on the system diagram as the source being reviewed. It is not the energy absorber in the preceding example. Use the <a href=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2021\/11\/NDR-240.pdf\">NDR-240 public specification<\/a> to identify the offered variant, then request the limits that govern an externally energized output.<\/p>\n<\/div>\n<figure class=\"model-photo\"><a href=\"https:\/\/www.wehopower.com\/ko\/product\/ndr-dinrail-240w-ac-to-dc-single-output-switching-power-supply\/\" class=\"model-product-link\" data-weho-link-role=\"product_image\" data-weho-model=\"NDR-240-24\" aria-label=\"NDR-240-24 product details\" data-weho-link-kind=\"product_detail\"><img loading=\"lazy\" src=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/ndr-240-24.webp\" width=\"550\" height=\"880\" alt=\"Power Supply Reverse Current: Define Where Returned Energy Goes  title=\" decoding=\"async\" power supply reverse current: define where returned energy goes title =\"\"><\/a><figcaption><a href=\"https:\/\/www.wehopower.com\/ko\/product\/ndr-dinrail-240w-ac-to-dc-single-output-switching-power-supply\/\" class=\"model-name-link\" data-weho-link-role=\"product_text\" data-weho-link-kind=\"product_detail\">NDR-240-24 product details \u2197<\/a><br \/>\n<span>NDR-240-24 source-side reference. Returned-energy handling needs separate verification.<\/span><br \/>\n<a href=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/10\/ndr-240-24-original-scaled.png\" target=\"_blank\" rel=\"noopener\" class=\"photo-original\" data-weho-link-role=\"view_original\">View original photograph \u2197<\/a><\/figcaption><\/figure>\n<div class=\"model-review-detail\">\n<p>Permitted back-drive conditions need a model-specific answer covering powered and unpowered states. Keep that response with the blocking and energy-destination records. If those conditions remain undocumented, do not approve the connection from the forward output rating alone.<\/p>\n<\/div>\n<\/div>\n<\/section>\n<h2 id=\"request-source-interface-evidence-before-a-purchase-decision\"><span class=\"ez-toc-section\" id=\"Request_source-interface_evidence_before_a_purchase_decision\"><\/span>Request source-interface evidence before a purchase decision<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p><a href=\"https:\/\/www.wehopower.com\/ko\/contact\/\" data-weho-link-kind=\"inquiry\">Ask WEHO to review the source side of your backfeed interface<\/a>. Send the proposed NDR-240-24 revision, system block diagram, connected energy sources, actual starting bus voltage, maximum externally applied voltage, receiver voltage limits, and returned-event record. Include reverse-current peak, duration, repetition, and source on\/off sequence. Assign the complete energy-management decision to the equipment design, rather than leaving it implicit in a power-supply order.<\/p>\n<\/div>","protected":false},"excerpt":{"rendered":"<p>A source that delivers a load current is not automatically able to accept current coming back. Define the power path during braking, backup operation, and shutdown, then assign a documented destination for returned energy.<\/p>","protected":false},"author":2,"featured_media":19913,"parent":0,"menu_order":133,"comment_status":"","ping_status":"","template":"","format":"standard","meta":{"_acf_changed":false,"_joinchat":[],"footnotes":""},"news_category":[284],"class_list":["post-19971","news","type-news","status-publish","format-standard","has-post-thumbnail","hentry","news_category-product-articles","entry"],"acf":[],"post_mailing_queue_ids":[],"_links":{"self":[{"href":"https:\/\/www.wehopower.com\/ko\/wp-json\/wp\/v2\/news\/19971","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.wehopower.com\/ko\/wp-json\/wp\/v2\/news"}],"about":[{"href":"https:\/\/www.wehopower.com\/ko\/wp-json\/wp\/v2\/types\/news"}],"author":[{"embeddable":true,"href":"https:\/\/www.wehopower.com\/ko\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.wehopower.com\/ko\/wp-json\/wp\/v2\/comments?post=19971"}],"version-history":[{"count":0,"href":"https:\/\/www.wehopower.com\/ko\/wp-json\/wp\/v2\/news\/19971\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.wehopower.com\/ko\/wp-json\/wp\/v2\/media\/19913"}],"wp:attachment":[{"href":"https:\/\/www.wehopower.com\/ko\/wp-json\/wp\/v2\/media?parent=19971"}],"wp:term":[{"taxonomy":"news_category","embeddable":true,"href":"https:\/\/www.wehopower.com\/ko\/wp-json\/wp\/v2\/news_category?post=19971"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}