S-250W series normal single switching power supply

WeHo professional 250W Switching CNC Power Supply can be widely used in Industrial Automation and CNC Stepper/Servo Systems.
115V and 230V can be chosen by the switch.Powerful functions(eg. PWM control) and professional designs (Built-in big fan for cooling) ensure high efficiency and high reliability of the power supply.Low cost also makes it more acceptable for general usage.If you have any questions, please do not hesitate to contact us at E -mel: [email protected]

Muat turun Minta sebut harga

Penerangan

Spesifikasi & Model

Spesifikasi	S-250-12	S-250-15	S-250-24	S-250-48
Voltan output DC, arus	12V 0～20A	15V 0～16A	24V 0～10A	48V 0～5A
Gelombang dan bunyi bising	150mvp-p	150mvp-p	150mvp-p	240MVP-P
Kestabilan dawai masuk	± 1%	± 1%	± 1%	± 1%
Memuatkan kestabilan	± 1%	± 1%	± 1%	± 1%
Kecekapan	0.79	0.79	0.81	0.84
Julat laras untuk voltan dc	± 10%	± 10%	± 10%	± 10%
Julat voltan input	90～132VAC/180~264VAC by switch 254～370VDC 47～63Hz
Kesan semasa	Cold start current 25A/115VAC 50A/230VAC
Perlindungan beban	105%～135%cut off the output,automatic recovery
Over voltage protection	115%～150%shut down O/P voltage,re-power on to recoverr
Persediaan, bangkit, tahan masa	200ms,50ms,16ms/230VAC at full load
Menahan voltan	I/P-O/P: 1.5kV I/P-FG: 1.5kV O/P-FG: 0.5kV 1minute
Rintangan pengasingan	I/P-O/P I/P-FG O/P-FG:500VDC/100MΩ
Suhu kerja	-10 ℃ ~+50 ℃
Dimensi	215×115×50mm
Berat	0.9kg
Pembungkusan	45.5×31.5×26CM/20PCS/18kg