S-3000W series normal single switching power supply

WeHo professional 3000W Switching CNC Power Supply can be widely used in Industrial Automation and CNC Stepper/Servo Systems.
115/230V AC range selectable.Powerful functions(eg. PWM control) and professional designs (Built-in big fan for cooling) ensure high efficiency and high reliability of the power supply.Low cost also makes it more acceptable for general usage.If you have any questions, please do not hesitate to contact us at E -mel: [email protected]

Muat turun Minta sebut harga

Penerangan

Spesifikasi & Model

Spesifikasi	S-3000-24	S-3000-36	S-3000-48	S-3000-60
Voltan output DC, arus	24V0～125A	36V 0～83A	48V 0~62.5A	60V 0～50A
Gelombang dan bunyi bising	120mvp-p	200mvp-p	240MVP-P	480mVp-P
Kestabilan dawai masuk	± 0.5%	± 0.5%	± 0.5%	± 0.5%
Memuatkan kestabilan	± 0.5%	± 0.5%	± 0.5%	± 0.5%
Kecekapan	0.8	0.86	0.87	0.88
Julat laras untuk voltan dc	± 10%	± 10%	± 10%	± 10%
Julat voltan input	200～264VAC 47～63Hz
Kesan semasa	Cold start current 120A/230VAC
Perlindungan beban	105%～135%cut off the output,automatic recovery
Over voltage protection	115%～150%shut down O/P voltage,re-power on to recover
Persediaan, bangkit, tahan uptime	2000ms,50ms,20ms/230VAC at full load
Menahan voltan	I/P-O/P: 1.5kV I/P-FG: 1.5kV O/P-FG: 0.5kV 1minute
Rintangan pengasingan	I/P-O/P I/P-FG O/P-FG:500VDC/100MΩ
Suhu kerja	-10 ℃ ~+50 ℃
Dimensi	291×132×136mm
Berat	5.3kg
Pembungkusan	38×37.5×21CM/2PCS/11kg