9000W PID Adjustable Voltage Battery Charger for Lead-Acid & Lithium Battery Packs With PFC
Extreme Scale 13.8V/14.6V/27.6V/29.2V/55.2V/58.4V Power: Designed for massive industrial battery arrays. These units offer broad voltage adjustment ranges (e.g., 15-30V, 30-60V, 55-110V) to precisely charge 13.8V Lead-Acid float or 58.4V LiFePO4 packs.
Modbus Communication Integration: Features Modbus protocol via 485 communication for smart grid and factory automation integration. Supports customizable remote switch and auxiliary 12V power outputs.
Reliable Constant Current Architecture: Utilizes professional CC protection that shuts down and locks output if parameters fall out of safe range, protecting high-value lithium cells from degradation. Heavy-Industrial Durability: Built into a robust 432x179x242mm chassis with 93% maximum efficiency. Operates reliably from -20°C to +80°C in high-demand environments.
- Opis
| Model | HPS-9000-24 | HPS-9000-30 | HPS-9000-36 | HPS-9000-48 | HPS-9000-60 | HPS-9000-110 | HPS-9000-220 |
| Napięcie stałe | 24 V | 30 V | 36 V | 48 V | 60 V | 110 V | 220 V |
| Prąd znamionowy | 337.5A | 270A | 225A | 168.8A | 135A | 73.6A | 36.8A |
| Aktualny zakres | 0-337.5A | 0-270A | 0-225A | 0-168.8A | 0-135A | 0-73.6A | 0-36.8A |
| Moc znamionowa | 9000W | ||||||
| Marszczyć | 500mV | 500mV | 500mV | 600mV | 600mV | 1000mV | 1500mV |
| Optymalny zakres prądu stałego | 12-24 V | 15-30 V | 18-36 V | 24-48 V | 30-60 V | 55-110 V | 110-220 V |
| Dokładność napięcia znamionowego | ±1,0% | ||||||
| Regulacja linii | ±1,0% | ||||||
| Regulacja obciążenia | ±1,0% | ||||||
| Czas uruchamiania i narastania | 1500mS,700mS/230VAC(Fully loaded) | ||||||
| Zakres napięcia | 95-190VAC(Output Current 50%),195-265VAC(Output Curent 100%) | ||||||
| Zakres częstotliwości | 45 Hz-65 Hz | ||||||
| Współczynnik mocy | PF≥0.99/230VAC(Fully loaded) | ||||||
| Efficiency(MAX) | 90% | 90% | 91.5% | 92% | 92% | 92.5% | 93% |
| ACCurent | <56A | ||||||
| Prąd upływowy | <3,0mA/240VAC | ||||||
| Zwarcie | When the constant curenitis entered and the votageis lower tian 10%of the rated votage,the outout is shut down and ockedafter1second,and recovers after restating. | ||||||
| Over current | The user can set the over-current value to delay the oufput for5 seconds and then shut down the output,and then resume after restarting. | ||||||
| Nadciśnienie | Users can set the overvoltage value to shut down the output voltage,and restore after restart. | ||||||
| Nadmierna temperatura | Shut down the output,automatically recover or restart after the temperature drops. | ||||||
| Regulacja napięcia wyjściowego | 0-26,4 V | 0-33 V | 0-39,6 V | 0-52,8 V | 0-66 V | 0-121 V | 0-242 V |
| Regulacja stałego prądu wyjściowego | 0-337.5A | 0-270A | 0-225A | 0-168.8A | 0-135A | 0-73.6A | 0-36.8A |
| 485Communications | MODBUS Communication Protocol | ||||||
| solated auxiliary power supply | 12V0.5A(Need customization) | ||||||
| Wyjście zdalnego przełącznika | Default power on,high level power off(5V-12V)(Need customization) | ||||||
| Alarmsignaloutput | Power Good Signal(Dry Contact≤36V,0.1A) (Need customization) | ||||||
| Temperatura robocza | -20-+60 ℃ | ||||||
| Wilgotność robocza | -20-90%RH No condensation | ||||||
| Storage temperatureandhumidity | -40-+85℃,10-95%RH No condensation | ||||||
| Odporność na wibracje | 10-500Hz,2G10 Min/cycle,X、Y、Z60 Min | ||||||
| insulation resistance | Input to Output:100Mhms/500VDC/25°C/70%RH | ||||||
| Odporność na ciśnienie | /P-O/P:2KVAC IP-FG:2KVACO/P-FG:0.5KVAC | ||||||
| size | 432×179×242mm | ||||||
| net weight | 12.5 kg | ||||||
Jakie są najlepsze produkty zasilające dla Twojej firmy?
Wzmocnij swój biznes dzięki wysokiej jakości produktom zasilającym WEHO.
Zapytaj eksperta