{"id":20995,"date":"2026-11-07T10:06:48","date_gmt":"2026-11-07T02:06:48","guid":{"rendered":"https:\/\/www.wehopower.com\/news\/12v-service-connector-load-breaking-lrs120\/"},"modified":"2026-11-07T10:06:48","modified_gmt":"2026-11-07T02:06:48","slug":"12v-service-connector-load-breaking-lrs120","status":"publish","type":"news","link":"https:\/\/www.wehopower.com\/pl\/news\/12v-service-connector-load-breaking-lrs120\/","title":{"rendered":"12 V Service Connectors: Current Rating Does Not Prove Load-Breaking Capability"},"content":{"rendered":"<figure class=\"hero\"><a href=\"https:\/\/www.wehopower.com\/pl\/product\/120w-ac-to-dc-12v-switched-power-supply\/\"><img decoding=\"async\" src=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/11\/hero-23.webp\" alt=\"12 V Service Connectors: Current Rating Does Not Prove Load-Breaking Capability  title=\" fetchpriority=\"high\" 12 service connectors: current rating does not prove load-breaking capability title=\"\"><\/a><figcaption>AI-assisted application illustration using original LRS-120-12 artwork. A generic mated service connector and lead allowance are shown; contact clamping, rated current, withdrawal travel and load-breaking capability are not verified.<\/figcaption><a class=\"original-link\" href=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/11\/original-16.jpg\">View original product image<\/a><\/figure>\n<p><strong>A connector\u2019s continuous-current rating does not establish that it may be connected or separated while a 12 V load is energized.<\/strong> For a serviceable DC assembly, specify the intended mating state and obtain the connector\u2019s applicable operating permission before approving the interface.<\/p>\n<p>This guide helps a machine OEM review a detachable receiver powered by an LRS-120-12. It distinguishes three questions: can the connector carry the current, can it survive the planned mating cycles, and can it make or break this live circuit?<\/p>\n<nav class=\"toc\" aria-label=\"On this page\">\n<ol>\n<li><a href=\"#separate-three-ratings\">Separate carrying current, mating endurance and switching duty<\/a><\/li>\n<li><a href=\"#write-the-service-state\">Describe the service state at both halves of the connector<\/a><\/li>\n<li><a href=\"#review-load-behavior\">Describe the load encountered at connection and separation<\/a><\/li>\n<li><a href=\"#define-acceptable-design\">Choose a service concept supported by the connector documents<\/a><\/li>\n<li><a href=\"#handoff-service-record\">Keep service instructions aligned with the released hardware<\/a><\/li>\n<\/ol>\n<\/nav>\n<section id=\"separate-three-ratings\">\n<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_89 counter-hierarchy ez-toc-counter ez-toc-grey ez-toc-container-direction\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\" style=\"cursor:inherit\">Spis tre\u015bci<\/p>\n<span class=\"ez-toc-title-toggle\"><a href=\"#\" class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" aria-label=\"Prze\u0142\u0105cznik Spisu Tre\u015bci\"><span class=\"ez-toc-js-icon-con\"><span class=\"\"><span class=\"eztoc-hide\" style=\"display:none;\">D\u017awignia kolankowa<\/span><span class=\"ez-toc-icon-toggle-span\"><svg style=\"fill: #999;color:#999\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" class=\"list-377408\" width=\"20px\" height=\"20px\" viewbox=\"0 0 24 24\" fill=\"none\"><path d=\"M6 6H4v2h2V6zm14 0H8v2h12V6zM4 11h2v2H4v-2zm16 0H8v2h12v-2zM4 16h2v2H4v-2zm16 0H8v2h12v-2z\" fill=\"currentColor\"><\/path><\/svg><svg style=\"fill: #999;color:#999\" class=\"arrow-unsorted-368013\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"10px\" height=\"10px\" viewbox=\"0 0 24 24\" version=\"1.2\" baseprofile=\"tiny\"><path d=\"M18.2 9.3l-6.2-6.3-6.2 6.3c-.2.2-.3.4-.3.7s.1.5.3.7c.2.2.4.3.7.3h11c.3 0 .5-.1.7-.3.2-.2.3-.5.3-.7s-.1-.5-.3-.7zM5.8 14.7l6.2 6.3 6.2-6.3c.2-.2.3-.5.3-.7s-.1-.5-.3-.7c-.2-.2-.4-.3-.7-.3h-11c-.3 0-.5.1-.7.3-.2.2-.3.5-.3.7s.1.5.3.7z\"\/><\/svg><\/span><\/span><\/span><\/a><\/span><\/div>\n<nav><ul class='ez-toc-list ez-toc-list-level-1' ><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/www.wehopower.com\/pl\/news\/12v-service-connector-load-breaking-lrs120\/#Separate_carrying_current_mating_endurance_and_switching_duty\" >Separate carrying current, mating endurance and switching duty<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/www.wehopower.com\/pl\/news\/12v-service-connector-load-breaking-lrs120\/#Describe_the_service_state_at_both_halves_of_the_connector\" >Describe the service state at both halves of the connector<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/www.wehopower.com\/pl\/news\/12v-service-connector-load-breaking-lrs120\/#Describe_the_load_encountered_at_connection_and_separation\" >Describe the load encountered at connection and separation<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/www.wehopower.com\/pl\/news\/12v-service-connector-load-breaking-lrs120\/#Choose_a_service_concept_supported_by_the_connector_documents\" >Choose a service concept supported by the connector documents<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/www.wehopower.com\/pl\/news\/12v-service-connector-load-breaking-lrs120\/#Keep_service_instructions_aligned_with_the_released_hardware\" >Keep service instructions aligned with the released hardware<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/www.wehopower.com\/pl\/news\/12v-service-connector-load-breaking-lrs120\/#Detachable_DC_interface_release_record\" >Detachable DC interface release record<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/www.wehopower.com\/pl\/news\/12v-service-connector-load-breaking-lrs120\/#Sources_and_further_reading\" >Sources and further reading<\/a><\/li><\/ul><\/nav><\/div>\n<h2><span class=\"ez-toc-section\" id=\"Separate_carrying_current_mating_endurance_and_switching_duty\"><\/span>Separate carrying current, mating endurance and switching duty<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>The <a href=\"https:\/\/www.wehopower.com\/pl\/product\/120w-ac-to-dc-12v-switched-power-supply\/\">WEHO LRS-120 table<\/a> lists the 12 V version at 0\u201310 A. That is not a rating for an external plug. A connector selected for the branch needs its own evidence at the intended conductor, contact loading, ambient temperature and mating combination.<\/p>\n<p>Mechanical endurance in mating cycles describes a separate duty. It does not automatically include electrical making or breaking under the receiver\u2019s load. The mating pair, contact finish and test conditions must match the proposed use.<\/p>\n<p>Phoenix Contact, for example, explicitly states that a cited <a href=\"https:\/\/www.phoenixcontact.com\/en-ca\/products\/pcb-direct-plug-zec-10-4-st-35-c1-r14-1893708\" target=\"_blank\" rel=\"noopener\">COMBICON connector has no switching power<\/a> and must not be mated or separated live or under load in its intended use. This is evidence that permissions are connector-specific, not a restriction or approval automatically assigned to every connector.<\/p>\n<figure id=\"fig-original\" class=\"product-original\"><a href=\"https:\/\/www.wehopower.com\/pl\/product\/120w-ac-to-dc-12v-switched-power-supply\/\"><img decoding=\"async\" src=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/11\/original-16.jpg\" alt=\"12 V Service Connectors: Current Rating Does Not Prove Load-Breaking Capability  title=\" loading=\"lazy\" 12 service connectors: current rating does not prove load-breaking capability title=\"\"><\/a><figcaption>Manufacturer image showing the WEHO LRS-120-12; the photograph identifies the pictured unit and does not establish equipment-level suitability.<\/figcaption><a class=\"original-link\" href=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/11\/original-16.jpg\">View original image<\/a><\/figure>\n<\/section>\n<section id=\"write-the-service-state\">\n<h2><span class=\"ez-toc-section\" id=\"Describe_the_service_state_at_both_halves_of_the_connector\"><\/span>Describe the service state at both halves of the connector<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Write the procedure in terms of actual circuit states. \u201cPower off\u201d may mean a software command, removal of an upstream input, opening a DC switch or verified isolation of all relevant sources. These are different actions. A receiver with stored energy or a second communication-powered source can leave voltage on a supposedly disconnected interface.<\/p>\n<p>Trace positive, return, PE or chassis connection where applicable, and every auxiliary signal. Identify which half can remain energized after separation. Do not assume that a recessed socket eliminates the requirement to assess accessibility or that a low nominal voltage makes any procedure acceptable.<\/p>\n<figure id=\"fig-diagram\" class=\"diagram\"><img decoding=\"async\" class=\"technical-desktop\" src=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/11\/diagram-23.svg\" alt=\"12 V Service Connectors: Current Rating Does Not Prove Load-Breaking Capability  title=\" loading=\"lazy\" 12 service connectors: current rating does not prove load-breaking capability title=\"\"><img decoding=\"async\" class=\"technical-mobile\" src=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/11\/diagram-mobile-23.svg\" alt=\"12 V Service Connectors: Current Rating Does Not Prove Load-Breaking Capability  title=\" loading=\"lazy\" 12 service connectors: current rating does not prove load-breaking capability title=\"\"><figcaption>Connector-assessment categories, not approval of a mating pair or procedure.<\/figcaption><a class=\"original-link\" href=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/11\/diagram-23.svg\">Open full-size technical illustration<\/a><\/figure>\n<\/section>\n<section id=\"review-load-behavior\">\n<h2><span class=\"ez-toc-section\" id=\"Describe_the_load_encountered_at_connection_and_separation\"><\/span>Describe the load encountered at connection and separation<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<div class=\"table-scroll\">\n<table>\n<thead>\n<tr>\n<th scope=\"col\">Moment<\/th>\n<th scope=\"col\">Question<\/th>\n<th scope=\"col\">Useful evidence<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Initial connection<\/td>\n<td>Does an input capacitor produce a charging event?<\/td>\n<td>Receiver inrush or approved connection test<\/td>\n<\/tr>\n<tr>\n<td>Normal operation<\/td>\n<td>How many contacts carry current simultaneously?<\/td>\n<td>Loaded-contact and ambient conditions<\/td>\n<\/tr>\n<tr>\n<td>Separation<\/td>\n<td>Is current already interrupted by an approved means?<\/td>\n<td>Circuit state and connector instructions<\/td>\n<\/tr>\n<tr>\n<td>After separation<\/td>\n<td>Can either half retain or receive voltage?<\/td>\n<td>Stored energy and alternate-source review<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>A 6 A steady load, for example, may pass a hypothetical 8 A continuous-current screen under the connector\u2019s stated conditions. It has not thereby passed a live-disconnection assessment. Do not calculate a universal allowable break current by subtracting running amperes from the connector\u2019s carrying rating.<\/p>\n<\/section>\n<section id=\"define-acceptable-design\">\n<h2><span class=\"ez-toc-section\" id=\"Choose_a_service_concept_supported_by_the_connector_documents\"><\/span>Choose a service concept supported by the connector documents<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>One concept uses a connector only after the documented de-energizing and verification sequence. Another requires a connector and circuit explicitly designed and rated for the intended switching duty. The engineer must evaluate the actual equipment and applicable requirements before choosing.<\/p>\n<p>For energized connection, ask for the complete permission: DC voltage, current, load type, make\/break sequence, cycle count, mating pair and environmental conditions. A marketing phrase such as \u201cquick disconnect\u201d is not that evidence. Likewise, a protective cover or color key does not create an electrical switching rating.<\/p>\n<\/section>\n<section id=\"handoff-service-record\">\n<h2><span class=\"ez-toc-section\" id=\"Keep_service_instructions_aligned_with_the_released_hardware\"><\/span>Keep service instructions aligned with the released hardware<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Put the connector part numbers, pin assignment, permitted mating state and verification sequence on the same released interface drawing. Use identification that prevents a similar plug from being substituted silently. Ensure the actual technician can follow the procedure without guessing which source has been disabled.<\/p>\n<p>After a cable, receiver board or connector change, review the affected carrying, endurance and switching conditions again. A clear service-state record is more useful than a generic statement that the connector is rated above the supply current.<\/p>\n<\/section>\n<section class=\"cta\">\n<p>For a service connector on an <a href=\"https:\/\/www.wehopower.com\/pl\/product\/120w-ac-to-dc-12v-switched-power-supply\/\">LRS-120-12 assembly<\/a>, provide its exact part number, mating pair, conductor size, load current and intended disconnect state. Request the applicable supply connection instructions and obtain the connector manufacturer\u2019s separate evidence for any proposed energized mating or breaking duty.<\/p>\n<\/section>\n<section id=\"worksheet\" class=\"sheet\">\n<h2><span class=\"ez-toc-section\" id=\"Detachable_DC_interface_release_record\"><\/span>Detachable DC interface release record<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<div class=\"sheet-row\"><label>Supply model<input aria-label=\"Supply model\"><\/label><label>Receiver revision<input aria-label=\"Receiver revision\"><\/label><label>Connector mating pair<input aria-label=\"Connector mating pair\"><\/label><label>Permitted mating state<input aria-label=\"Permitted mating state\"><\/label><label>Service procedure revision<input aria-label=\"Service procedure revision\"><\/label><\/div>\n<div class=\"table-scroll\">\n<table>\n<thead>\n<tr>\n<th scope=\"col\">Interface conductor<\/th>\n<th scope=\"col\">Source after shutdown<\/th>\n<th scope=\"col\">Relevant connector permission<\/th>\n<th scope=\"col\">Verification<\/th>\n<th scope=\"col\">Owner<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td contenteditable=\"true\" aria-label=\"Worksheet cell\"><\/td>\n<td contenteditable=\"true\" aria-label=\"Worksheet cell\"><\/td>\n<td contenteditable=\"true\" aria-label=\"Worksheet cell\"><\/td>\n<td contenteditable=\"true\" aria-label=\"Worksheet cell\"><\/td>\n<td contenteditable=\"true\" aria-label=\"Worksheet cell\"><\/td>\n<\/tr>\n<tr>\n<td contenteditable=\"true\" aria-label=\"Worksheet cell\"><\/td>\n<td contenteditable=\"true\" aria-label=\"Worksheet cell\"><\/td>\n<td contenteditable=\"true\" aria-label=\"Worksheet cell\"><\/td>\n<td contenteditable=\"true\" aria-label=\"Worksheet cell\"><\/td>\n<td contenteditable=\"true\" aria-label=\"Worksheet cell\"><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>Blank project worksheet. Enter verified project data; example calculations above are not measurements.<\/p>\n<\/section>\n<section class=\"source-list\">\n<h2><span class=\"ez-toc-section\" id=\"Sources_and_further_reading\"><\/span>Sources and further reading<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<ol>\n<li><a href=\"https:\/\/www.wehopower.com\/pl\/product\/120w-ac-to-dc-12v-switched-power-supply\/\">WEHO LRS-120 product information<\/a><\/li>\n<li><a href=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2025\/07\/LRS-120-a07.pdf\">WEHO LRS-120 specification<\/a><\/li>\n<li><a href=\"https:\/\/www.phoenixcontact.com\/en-ca\/products\/pcb-direct-plug-zec-10-4-st-35-c1-r14-1893708\" target=\"_blank\" rel=\"noopener\">Phoenix Contact ZEC connector operating notes<\/a><\/li>\n<\/ol>\n<\/section>","protected":false},"excerpt":{"rendered":"<p>Separate continuous-current, mating-cycle and load-breaking evidence when adding a service connector to an LRS-120-12 powered assembly.<\/p>","protected":false},"author":2,"featured_media":20956,"parent":0,"menu_order":82,"comment_status":"","ping_status":"","template":"","format":"standard","meta":{"_acf_changed":false,"_joinchat":[],"footnotes":""},"news_category":[284],"class_list":["post-20995","news","type-news","status-publish","format-standard","has-post-thumbnail","hentry","news_category-product-articles","entry"],"acf":[],"post_mailing_queue_ids":[],"_links":{"self":[{"href":"https:\/\/www.wehopower.com\/pl\/wp-json\/wp\/v2\/news\/20995","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.wehopower.com\/pl\/wp-json\/wp\/v2\/news"}],"about":[{"href":"https:\/\/www.wehopower.com\/pl\/wp-json\/wp\/v2\/types\/news"}],"author":[{"embeddable":true,"href":"https:\/\/www.wehopower.com\/pl\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.wehopower.com\/pl\/wp-json\/wp\/v2\/comments?post=20995"}],"version-history":[{"count":0,"href":"https:\/\/www.wehopower.com\/pl\/wp-json\/wp\/v2\/news\/20995\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.wehopower.com\/pl\/wp-json\/wp\/v2\/media\/20956"}],"wp:attachment":[{"href":"https:\/\/www.wehopower.com\/pl\/wp-json\/wp\/v2\/media?parent=20995"}],"wp:term":[{"taxonomy":"news_category","embeddable":true,"href":"https:\/\/www.wehopower.com\/pl\/wp-json\/wp\/v2\/news_category?post=20995"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}