{"id":21001,"date":"2026-11-07T10:08:02","date_gmt":"2026-11-07T02:08:02","guid":{"rendered":"https:\/\/www.wehopower.com\/news\/metal-led-power-supply-infrared-temperature-emissivity\/"},"modified":"2026-11-07T10:08:02","modified_gmt":"2026-11-07T02:08:02","slug":"metal-led-power-supply-infrared-temperature-emissivity","status":"publish","type":"news","link":"https:\/\/www.wehopower.com\/pl\/news\/metal-led-power-supply-infrared-temperature-emissivity\/","title":{"rendered":"Infrared Checks on a Metal LED Power Supply: Verify the Surface Measurement"},"content":{"rendered":"<figure class=\"hero\"><a href=\"https:\/\/www.wehopower.com\/pl\/product\/ac-dc-12v-24v-transformer-60w-led-driver-power-supply\/\"><img decoding=\"async\" src=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/11\/hero-29.webp\" alt=\"Infrared Checks on a Metal LED Power Supply: Verify the Surface Measurement  title=\" fetchpriority=\"high\" infrared checks on metal led power supply: verify the surface measurement title=\"\"><\/a><figcaption>WL-60-12 in an illustrative surface-inspection setup beside a thermal camera. The output pair uses the owner-confirmed left-positive\/right-negative order. The camera display is blank; no surface temperature, hotspot or emissivity-corrected result is shown.<\/figcaption><a class=\"original-link\" href=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/11\/original-22.jpg\">View original product image<\/a><\/figure>\n<p>An infrared image of a metal LED power supply can help locate a thermal pattern, but the displayed temperature may be strongly affected by surface emissivity and reflected radiation. Establish a repeatable measurement method before deciding that a shiny case is unusually hot or comfortably cool. A colourful thermogram is not, by itself, a valid case-temperature result.<\/p>\n<p>This guide is for lighting OEMs comparing an installed prototype or investigating a changed thermal pattern. The original WEHO WL-60-12 photograph shows a narrow ventilated metal chassis marked 12 V, 5 A. It provides a useful surface example; no thermal-camera reading or installation acceptance is claimed for it.<\/p>\n<nav class=\"toc\" aria-label=\"On this page\">\n<ol>\n<li><a href=\"#name-the-question\">Separate a survey from a compliance measurement<\/a><\/li>\n<li><a href=\"#understand-the-surface\">Identify what the camera is observing<\/a><\/li>\n<li><a href=\"#make-the-method-repeatable\">Fix the viewing and operating conditions<\/a><\/li>\n<li><a href=\"#establish-a-reference\">Validate a suitable reference method<\/a><\/li>\n<li><a href=\"#interpret-the-result\">Compare like quantities and keep arithmetic modest<\/a><\/li>\n<li><a href=\"#close-the-design-loop\">Make the thermal record useful to the supplier<\/a><\/li>\n<\/ol>\n<\/nav>\n<section id=\"name-the-question\">\n<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_89 counter-hierarchy ez-toc-counter ez-toc-grey ez-toc-container-direction\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\" style=\"cursor:inherit\">Spis tre\u015bci<\/p>\n<span class=\"ez-toc-title-toggle\"><a href=\"#\" class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" aria-label=\"Prze\u0142\u0105cznik Spisu Tre\u015bci\"><span class=\"ez-toc-js-icon-con\"><span class=\"\"><span class=\"eztoc-hide\" style=\"display:none;\">D\u017awignia kolankowa<\/span><span class=\"ez-toc-icon-toggle-span\"><svg style=\"fill: #999;color:#999\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" class=\"list-377408\" width=\"20px\" height=\"20px\" viewbox=\"0 0 24 24\" fill=\"none\"><path d=\"M6 6H4v2h2V6zm14 0H8v2h12V6zM4 11h2v2H4v-2zm16 0H8v2h12v-2zM4 16h2v2H4v-2zm16 0H8v2h12v-2z\" fill=\"currentColor\"><\/path><\/svg><svg style=\"fill: #999;color:#999\" class=\"arrow-unsorted-368013\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"10px\" height=\"10px\" viewbox=\"0 0 24 24\" version=\"1.2\" baseprofile=\"tiny\"><path d=\"M18.2 9.3l-6.2-6.3-6.2 6.3c-.2.2-.3.4-.3.7s.1.5.3.7c.2.2.4.3.7.3h11c.3 0 .5-.1.7-.3.2-.2.3-.5.3-.7s-.1-.5-.3-.7zM5.8 14.7l6.2 6.3 6.2-6.3c.2-.2.3-.5.3-.7s-.1-.5-.3-.7c-.2-.2-.4-.3-.7-.3h-11c-.3 0-.5.1-.7.3-.2.2-.3.5-.3.7s.1.5.3.7z\"\/><\/svg><\/span><\/span><\/span><\/a><\/span><\/div>\n<nav><ul class='ez-toc-list ez-toc-list-level-1' ><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/www.wehopower.com\/pl\/news\/metal-led-power-supply-infrared-temperature-emissivity\/#Separate_a_survey_from_a_compliance_measurement\" >Separate a survey from a compliance measurement<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/www.wehopower.com\/pl\/news\/metal-led-power-supply-infrared-temperature-emissivity\/#Identify_what_the_camera_is_observing\" >Identify what the camera is observing<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/www.wehopower.com\/pl\/news\/metal-led-power-supply-infrared-temperature-emissivity\/#Fix_the_viewing_and_operating_conditions\" >Fix the viewing and operating conditions<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/www.wehopower.com\/pl\/news\/metal-led-power-supply-infrared-temperature-emissivity\/#Validate_a_suitable_reference_method\" >Validate a suitable reference method<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/www.wehopower.com\/pl\/news\/metal-led-power-supply-infrared-temperature-emissivity\/#Compare_like_quantities_and_keep_arithmetic_modest\" >Compare like quantities and keep arithmetic modest<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/www.wehopower.com\/pl\/news\/metal-led-power-supply-infrared-temperature-emissivity\/#Make_the_thermal_record_useful_to_the_supplier\" >Make the thermal record useful to the supplier<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/www.wehopower.com\/pl\/news\/metal-led-power-supply-infrared-temperature-emissivity\/#Metal-case_infrared_survey_record\" >Metal-case infrared survey record<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/www.wehopower.com\/pl\/news\/metal-led-power-supply-infrared-temperature-emissivity\/#Sources_and_further_reading\" >Sources and further reading<\/a><\/li><\/ul><\/nav><\/div>\n<h2><span class=\"ez-toc-section\" id=\"Separate_a_survey_from_a_compliance_measurement\"><\/span>Separate a survey from a compliance measurement<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>First state the decision. A maintenance survey may ask whether an area changed relative to its own established baseline. A qualification test may need an actual temperature at a manufacturer-defined location under a controlled condition. Those are different requirements. The method, measurement uncertainty and documentation must suit the decision.<\/p>\n<p>Do not take a maximum pixel from an arbitrary region and compare it with a limit for surrounding air or for another component. Surface temperature, internal component temperature and local ambient are different quantities. If the supply documentation does not define a relevant case point or limit, a surface survey does not create one.<\/p>\n<\/section>\n<section id=\"understand-the-surface\">\n<h2><span class=\"ez-toc-section\" id=\"Identify_what_the_camera_is_observing\"><\/span>Identify what the camera is observing<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p><a href=\"https:\/\/www.flir.com\/discover\/professional-tools\/how-does-emissivity-affect-thermal-imaging\/\" target=\"_blank\" rel=\"noopener\">FLIR explains that reflective metal can show radiation from its surroundings<\/a> rather than a straightforward indication of its own temperature. Surface finish, coating, viewing geometry and the environment therefore matter. A universal emissivity setting for all metal is not a defensible solution.<\/p>\n<p>On a perforated supply, a small image region can contain bare case, printed marking, holes and a view toward internal parts. Treat those as different targets. An apparent hot spot seen through a hole is not automatically the temperature of the surrounding cover. Record which physical surface each reported region represents and whether the camera resolves it adequately.<\/p>\n<figure id=\"fig-original\" class=\"product-original\"><a href=\"https:\/\/www.wehopower.com\/pl\/product\/ac-dc-12v-24v-transformer-60w-led-driver-power-supply\/\"><img decoding=\"async\" src=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/11\/original-22.jpg\" alt=\"Infrared Checks on a Metal LED Power Supply: Verify the Surface Measurement  title=\" loading=\"lazy\" infrared checks on metal led power supply: verify the surface measurement title=\"\"><\/a><figcaption>Original WEHO WL-60-12 photograph, marked 12 V, 5 A. Surface appearance does not establish infrared temperature or service life.<\/figcaption><a class=\"original-link\" href=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/11\/original-22.jpg\">View original image<\/a><\/figure>\n<\/section>\n<section id=\"make-the-method-repeatable\">\n<h2><span class=\"ez-toc-section\" id=\"Fix_the_viewing_and_operating_conditions\"><\/span>Fix the viewing and operating conditions<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Record camera and lens identity, calibration status, range, distance, angle, focus and the applicable radiometric settings. Identify nearby reflecting objects and any cover or window in the optical path. <a href=\"https:\/\/docs.flir.com\/T810603\/en-US\/latest\/s07.html\" target=\"_blank\" rel=\"noopener\">FLIR\u2019s measurement instructions<\/a> emphasize the influence of distance, ambient conditions and material emissivity.<\/p>\n<p>Then freeze the electrical and mechanical state: exact supply revision, actual load, input condition, mounting orientation, enclosure cover, airflow and stabilization criterion. A door-open photo and a door-closed endurance condition are not interchangeable. Keep a visible-light reference photograph with each thermogram so the next reviewer can locate the same target.<\/p>\n<figure id=\"fig-diagram\" class=\"diagram\"><img decoding=\"async\" class=\"technical-desktop\" src=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/11\/diagram-29.svg\" alt=\"Infrared Checks on a Metal LED Power Supply: Verify the Surface Measurement  title=\" loading=\"lazy\" infrared checks on metal led power supply: verify the surface measurement title=\"\"><img decoding=\"async\" class=\"technical-mobile\" src=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/11\/diagram-mobile-29.svg\" alt=\"Infrared Checks on a Metal LED Power Supply: Verify the Surface Measurement  title=\" loading=\"lazy\" infrared checks on metal led power supply: verify the surface measurement title=\"\"><figcaption>Thermal-measurement workflow, not a measured thermogram or a WL-60 temperature limit.<\/figcaption><a class=\"original-link\" href=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/11\/diagram-29.svg\">Open full-size technical illustration<\/a><\/figure>\n<\/section>\n<section id=\"establish-a-reference\">\n<h2><span class=\"ez-toc-section\" id=\"Validate_a_suitable_reference_method\"><\/span>Validate a suitable reference method<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Where an absolute surface temperature is needed, establish an appropriate comparison method through the approved test procedure. This could involve a suitable contact sensor or a characterized high-emissivity target on a permitted external area. Its thermal contact, response and effect on the assembly must be considered; it is not enough to place any piece of tape on the case and assume an exact value.<\/p>\n<p>Prepare any temporary target while the equipment is safely isolated, using a location and material approved for that test. Do not obstruct ventilation, cover identification, approach hazardous circuitry or alter the product construction. If an appropriate reference cannot be established, report a qualitative survey and the unresolved limitation rather than an invented accurate temperature.<\/p>\n<\/section>\n<section id=\"interpret-the-result\">\n<h2><span class=\"ez-toc-section\" id=\"Compare_like_quantities_and_keep_arithmetic_modest\"><\/span>Compare like quantities and keep arithmetic modest<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Suppose a hypothetical validated external-surface measurement is 68 \u00b0C while the defined local-air reference is 24 \u00b0C. The observed difference is 44 K. This subtraction does not establish an internal hot-spot temperature, a thermal resistance or a pass\/fail outcome. Those require the relevant power-loss definition, thermal model and applicable acceptance limits.<\/p>\n<div class=\"table-wrap\">\n<table>\n<thead>\n<tr>\n<th>Observation<\/th>\n<th>Useful interpretation<\/th>\n<th>Unsupported conclusion<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Same surface and settings change after a design revision<\/td>\n<td>Investigate the changed assembly under matched conditions<\/td>\n<td>The revision is automatically unsafe<\/td>\n<\/tr>\n<tr>\n<td>Bright region moves when viewing geometry changes<\/td>\n<td>Check reflection and target definition<\/td>\n<td>The heat source physically moved<\/td>\n<\/tr>\n<tr>\n<td>Printed region and bare metal show different apparent values<\/td>\n<td>Review their different surface properties<\/td>\n<td>Both regions have different actual temperatures<\/td>\n<\/tr>\n<tr>\n<td>Validated surface-to-air difference is 44 K<\/td>\n<td>Record the two locations and conditions<\/td>\n<td>44 K is an allowed universal rise<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>If several prototypes are compared, preserve both the raw images and the conditions. Auto-scaled colour palettes can exaggerate small differences or conceal a change; use numerical, attributable measurements for quantitative decisions.<\/p>\n<\/section>\n<section id=\"close-the-design-loop\">\n<h2><span class=\"ez-toc-section\" id=\"Make_the_thermal_record_useful_to_the_supplier\"><\/span>Make the thermal record useful to the supplier<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>A strong enquiry includes the exact WL-60-12 identity, enclosure sketch, load states, input conditions, airflow arrangement, measurement locations and reference method. Include the original thermograms and visible-light views. Ask for the applicable installed operating limits and any required measurement point before comparing the result with a rating.<\/p>\n<p>The public WL-60 page has generic efficiency and environmental statements that are not consistent throughout. This article uses none of them to infer a case-temperature allowance or service life. The practical result is a traceable thermal observation with a clear interpretation boundary. It can support an engineering discussion without presenting an attractive image as a completed qualification.<\/p>\n<\/section>\n<section class=\"cta\">\n<p>Send the original thermograms and visible-light views with the load state, enclosure, airflow, measurement locations and validated reference method for your <a href=\"https:\/\/www.wehopower.com\/pl\/product\/ac-dc-12v-24v-transformer-60w-led-driver-power-supply\/\">WL-60-12 application<\/a>. Request the applicable installed limits and any required measurement point before treating a surface observation as a qualification result.<\/p>\n<\/section>\n<section id=\"worksheet\" class=\"sheet\">\n<h2><span class=\"ez-toc-section\" id=\"Metal-case_infrared_survey_record\"><\/span>Metal-case infrared survey record<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<div class=\"sheet-row\"><label>Exact supply \/ enclosure revisions<input aria-label=\"Exact supply \/ enclosure revisions\"><\/label><label>Decision and actual measurement surface<input aria-label=\"Decision and actual measurement surface\"><\/label><label>Load \/ input \/ stabilization conditions<input aria-label=\"Load \/ input \/ stabilization conditions\"><\/label><label>Camera, lens, calibration and viewing geometry<input aria-label=\"Camera, lens, calibration and viewing geometry\"><\/label><label>Emissivity \/ reflected conditions \/ reference method<input aria-label=\"Emissivity \/ reflected conditions \/ reference method\"><\/label><label>Applicable criterion \/ evidence owner<input aria-label=\"Applicable criterion \/ evidence owner\"><\/label><\/div>\n<div class=\"table-scroll\">\n<table>\n<thead>\n<tr>\n<th scope=\"col\">Target region<\/th>\n<th scope=\"col\">Measurement method<\/th>\n<th scope=\"col\">Local air \u00b0C<\/th>\n<th scope=\"col\">Surface result \u00b0C<\/th>\n<th scope=\"col\">Uncertainty \/ limitation<\/th>\n<th scope=\"col\">Decision<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td contenteditable=\"true\" aria-label=\"Worksheet cell\"><\/td>\n<td contenteditable=\"true\" aria-label=\"Worksheet cell\"><\/td>\n<td contenteditable=\"true\" aria-label=\"Worksheet cell\"><\/td>\n<td contenteditable=\"true\" aria-label=\"Worksheet cell\"><\/td>\n<td contenteditable=\"true\" aria-label=\"Worksheet cell\"><\/td>\n<td contenteditable=\"true\" aria-label=\"Worksheet cell\"><\/td>\n<\/tr>\n<tr>\n<td contenteditable=\"true\" aria-label=\"Worksheet cell\"><\/td>\n<td contenteditable=\"true\" aria-label=\"Worksheet cell\"><\/td>\n<td contenteditable=\"true\" aria-label=\"Worksheet cell\"><\/td>\n<td contenteditable=\"true\" aria-label=\"Worksheet cell\"><\/td>\n<td contenteditable=\"true\" aria-label=\"Worksheet cell\"><\/td>\n<td contenteditable=\"true\" aria-label=\"Worksheet cell\"><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>Blank project worksheet. Enter verified project data; example calculations above are not measurements.<\/p>\n<\/section>\n<section class=\"source-list\">\n<h2><span class=\"ez-toc-section\" id=\"Sources_and_further_reading\"><\/span>Sources and further reading<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<ol>\n<li><a href=\"https:\/\/www.wehopower.com\/pl\/product\/ac-dc-12v-24v-transformer-60w-led-driver-power-supply\/\">WEHO WL-60 product page<\/a><\/li>\n<li><a href=\"https:\/\/www.flir.com\/discover\/professional-tools\/how-does-emissivity-affect-thermal-imaging\/\" target=\"_blank\" rel=\"noopener\">FLIR How Does Emissivity Affect Thermal Imaging?<\/a><\/li>\n<li><a href=\"https:\/\/docs.flir.com\/T810603\/en-US\/latest\/s07.html\" target=\"_blank\" rel=\"noopener\">FLIR Using a thermal camera<\/a><\/li>\n<\/ol>\n<\/section>","protected":false},"excerpt":{"rendered":"<p>Make a repeatable thermal survey of an LED supply: define surface, emissivity, reflected conditions, load and reference method before interpreting a hot spot.<\/p>","protected":false},"author":2,"featured_media":20979,"parent":0,"menu_order":88,"comment_status":"","ping_status":"","template":"","format":"standard","meta":{"_acf_changed":false,"_joinchat":[],"footnotes":""},"news_category":[284],"class_list":["post-21001","news","type-news","status-publish","format-standard","has-post-thumbnail","hentry","news_category-product-articles","entry"],"acf":[],"post_mailing_queue_ids":[],"_links":{"self":[{"href":"https:\/\/www.wehopower.com\/pl\/wp-json\/wp\/v2\/news\/21001","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.wehopower.com\/pl\/wp-json\/wp\/v2\/news"}],"about":[{"href":"https:\/\/www.wehopower.com\/pl\/wp-json\/wp\/v2\/types\/news"}],"author":[{"embeddable":true,"href":"https:\/\/www.wehopower.com\/pl\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.wehopower.com\/pl\/wp-json\/wp\/v2\/comments?post=21001"}],"version-history":[{"count":0,"href":"https:\/\/www.wehopower.com\/pl\/wp-json\/wp\/v2\/news\/21001\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.wehopower.com\/pl\/wp-json\/wp\/v2\/media\/20979"}],"wp:attachment":[{"href":"https:\/\/www.wehopower.com\/pl\/wp-json\/wp\/v2\/media?parent=21001"}],"wp:term":[{"taxonomy":"news_category","embeddable":true,"href":"https:\/\/www.wehopower.com\/pl\/wp-json\/wp\/v2\/news_category?post=21001"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}