New Products Alert


WeHo will only notify you by email when a new product is launched.
We won’t send you any emails at other times.

Contact Us

Waterproof IP67 LED driver AC 110v/220v to constant DC output 15W power supply

LPV-15 is a dedicated LED driving device that delivers a constant current/voltage or generates an adjustable current controlled by an external dimmer to LEDs.

Depending on its types or design concept, some of them not only have PFC capability but also can be located in a harsh environment such as dusty, humid places.

LED power supplies include metal case, plastic case, and PCB types.

Full range input voltage 85-264VAC

Suitble for LED related fixture or applicance

Cooling by free air convection

Low cost , high reliability

100% full load burn-in test

Model LPV-15-12 LPV-15-24
DC voltage 12V 24V
Voltage tolerance ±1% ±1%
Rated current 1.1A 0.7A
output Current range 0~1A 0~0.5A
Rated power 15W 15W
Ripple&noise 120mvp-p 150mvp-p
Voltage range 85~264VAC,235~373VDC
Frequency 47~63HZ
input AC current 0.1A/230VAC
Efficiency 78% 80%
Inrush current Cold start current 30A/230VAC
Leakage current <0.5mA/240VAC
protection Over load Rated output power 105%~135%start over load protection
Protection type:hiccup mode,auto-recovery after fault condition is removed
Over voltage 15.6~17.8V 30.6~33.2V
Protection type:hiccup mode,auto-recovery after fault condition is removed
Over temperature when temperature of transistor inner node is over 150°C,
start over temperature protection
Protection mode:cutoff output,auto-recovery after temperature become normal
environment Workingtemp,humidity -10°C~+60°C,20%~90%RH
Storage temp.humidity -20°C~+85°C,10%~95%RH non condensing
Withstand vibration 10~500HZ,2G 10min/1cycle,period for 60minutes,each axes
safety Withstand voltage I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolated resistance I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC
Fits Safety standard Fit UL1012,IP67 protect level
tandard EMC standard Fit EN55022,CLASSA
Others Dimension 182*30*20mm (L*W*H)
Weight/packing 0.2kg/80pcs/16kg/0.027m³/0.94CUFT
Note 1. All parameters NOT specially mentioned are measured at 230VAC input,
rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation

Stay in touch

You will get the satisfacting answer in time from our complete service team.7*24 service is for you,any question please contact us.