S-2000W series normal single switching power supply

WeHo professional 2000W Switching CNC Power Supply can be widely used in Industrial Automation and CNC Stepper/Servo Systems.
115/230V AC range selectable, air cooling by the built-in fan.Filter capacitance; High withstand voltage; Low dissipation; Large capacity.Widely being used in Industrial automation, LED display, electronic equipment, communications, etc.If you have any questions, please do not hesitate to contact us at E-posta: [email protected]

İndirmek Teklif isteyin

Tanım

Özellikler ve Model

Spesifikasyon	S-2000-24	S-2000-36	S-2000-48	S-2000-60
DC çıkış voltajı, akım	24V0～83A	36V 0～55A	48V 0～41A	60V 0～33A
Dalga ve gürültü	120mVp-P	200mVp-P	240mVp-P	480mVp-P
Inlet wire stability	±0,5%	±0,5%	±0,5%	±0,5%
Load stability	±0,5%	±0,5%	±0,5%	±0,5%
Yeterlik	0.8	0.86	0.87	0.88
DC voltajı için ayarlanabilir aralık	±10%	±10%	±10%	±10%
Giriş voltajı aralığı	200～264VAC 47～63Hz
Darbe akımı	Cold start current 45A/230VAC
Aşırı yük koruması	105%～135%cut off the output,automatic recovery
Over voltage protection	115%～150%shut down O/P voltage,re-power on to recover
Setup,rise,hold uptime	2000ms,50ms,20ms/230VAC at full load
Voltaja dayanmak	I/P-O/P:1.5kV I/P-FG:1.5kV O/P-FG:0.5kV 1minute
Isolation resistance	I/P-O/P I/P-FG O/P-FG:500VDC/100MΩ
Working temperature	-10℃~+50℃
Boyut	291×132×136mm
Ağırlık	5.3kg
Ambalaj	38×37.5×21CM/2PCS/11kg