{"id":21598,"date":"2026-11-11T11:30:18","date_gmt":"2026-11-11T03:30:18","guid":{"rendered":"https:\/\/www.wehopower.com\/news\/tx4-w-parameter-lock-production-handover\/"},"modified":"2026-11-11T11:30:18","modified_gmt":"2026-11-11T03:30:18","slug":"tx4-w-parameter-lock-production-handover","status":"publish","type":"news","link":"https:\/\/www.wehopower.com\/ur\/news\/tx4-w-parameter-lock-production-handover\/","title":{"rendered":"TX4-W Parameter Locks: Verify Settings Before Production Handover"},"content":{"rendered":"<div class=\"weho-blog\">\n<p><strong>Key Engineering Takeaways<\/strong><\/p>\n<ul>\n<li>Verify and record the approved configuration before applying a TX4 parameter lock.<\/li>\n<li>Choose the lock scope from the settings operators are permitted to change during production.<\/li>\n<li>Confirm the actual restrictions on the supplied controller; a saved number alone does not prove the expected interface behavior.<\/li>\n<li>Keep parameter locking separate from machine isolation, protective interlocks and access control outside the controller.<\/li>\n<\/ul>\n<figure class=\"article-figure hero\" data-asset=\"hero\"><a class=\"product-image-link\" href=\"https:\/\/www.wehopower.com\/ur\/product\/tx4-series-tx4-w-economic-dual-display-pid-temperature-controller\/\" aria-label=\"TX4-W details\"><img fetchpriority=\"high\" src=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/11\/tx4-w-production-parameter-lock-application.webp\" alt=\"TX4-W Parameter Locks: Verify Settings Before Production Handover  title=\" width=\"1200\" height=\"675\" loading=\"eager\" decoding=\"async\" tx4-w parameter locks: verify settings before production handover title =\"\"><\/a><figcaption>AI-assisted application illustration using the original TX4-W front image. The retained display does not demonstrate a selected lock level, a completed handover or verified rear wiring. <a href=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/11\/application-source-1.png\" target=\"_blank\" rel=\"noopener\">View original-resolution image<\/a><\/figcaption><\/figure>\n<nav class=\"table-of-contents\" aria-label=\"Article contents\">\n<details open>\n<summary>On this page<\/summary>\n<ol>\n<li><a href=\"#what-decision-should-the-handover-team-make\">What decision should the handover team make?<\/a><\/li>\n<li><a href=\"#what-lock-scopes-does-the-tx4-manual-describe\">What lock scopes does the TX4 manual describe?<\/a><\/li>\n<li><a href=\"#how-do-you-build-a-useful-settings-baseline\">How do you build a useful settings baseline?<\/a><\/li>\n<li><a href=\"#how-should-you-verify-permitted-and-prohibited-changes\">How should you verify permitted and prohibited changes?<\/a><\/li>\n<li><a href=\"#what-happens-after-maintenance-or-a-recipe-change\">What happens after maintenance or a recipe change?<\/a><\/li>\n<li><a href=\"#what-should-an-oem-include-in-a-lock-scope-enquiry\">What should an OEM include in a lock-scope enquiry?<\/a><\/li>\n<li><a href=\"#engineering-faq\">Engineering FAQ<\/a><\/li>\n<\/ol>\n<\/details>\n<\/nav>\n<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_89 counter-hierarchy ez-toc-counter ez-toc-grey ez-toc-container-direction\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\" style=\"cursor:inherit\">\u0645\u0646\u062f\u0631\u062c\u0627\u062a \u06a9\u0627 \u062c\u062f\u0648\u0644<\/p>\n<span class=\"ez-toc-title-toggle\"><a href=\"#\" class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" aria-label=\"Toggle Table of Content\"><span class=\"ez-toc-js-icon-con\"><span class=\"\"><span class=\"eztoc-hide\" style=\"display:none;\">\u0679\u0648\u06af\u0644 \u06a9\u0631\u06cc\u06ba\u06d4<\/span><span class=\"ez-toc-icon-toggle-span\"><svg style=\"fill: #999;color:#999\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" class=\"list-377408\" width=\"20px\" height=\"20px\" viewbox=\"0 0 24 24\" fill=\"none\"><path d=\"M6 6H4v2h2V6zm14 0H8v2h12V6zM4 11h2v2H4v-2zm16 0H8v2h12v-2zM4 16h2v2H4v-2zm16 0H8v2h12v-2z\" fill=\"currentColor\"><\/path><\/svg><svg style=\"fill: #999;color:#999\" class=\"arrow-unsorted-368013\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"10px\" height=\"10px\" viewbox=\"0 0 24 24\" version=\"1.2\" baseprofile=\"tiny\"><path d=\"M18.2 9.3l-6.2-6.3-6.2 6.3c-.2.2-.3.4-.3.7s.1.5.3.7c.2.2.4.3.7.3h11c.3 0 .5-.1.7-.3.2-.2.3-.5.3-.7s-.1-.5-.3-.7zM5.8 14.7l6.2 6.3 6.2-6.3c.2-.2.3-.5.3-.7s-.1-.5-.3-.7c-.2-.2-.4-.3-.7-.3h-11c-.3 0-.5.1-.7.3-.2.2-.3.5-.3.7s.1.5.3.7z\"\/><\/svg><\/span><\/span><\/span><\/a><\/span><\/div>\n<nav><ul class='ez-toc-list ez-toc-list-level-1' ><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/www.wehopower.com\/ur\/news\/tx4-w-parameter-lock-production-handover\/#What_decision_should_the_handover_team_make\" >What decision should the handover team make?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/www.wehopower.com\/ur\/news\/tx4-w-parameter-lock-production-handover\/#What_lock_scopes_does_the_TX4_manual_describe\" >What lock scopes does the TX4 manual describe?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/www.wehopower.com\/ur\/news\/tx4-w-parameter-lock-production-handover\/#How_do_you_build_a_useful_settings_baseline\" >How do you build a useful settings baseline?<\/a><ul class='ez-toc-list-level-3' ><li class='ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/www.wehopower.com\/ur\/news\/tx4-w-parameter-lock-production-handover\/#Hypothetical_Production-Handover_Example\" >Hypothetical Production-Handover Example<\/a><\/li><\/ul><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/www.wehopower.com\/ur\/news\/tx4-w-parameter-lock-production-handover\/#How_should_you_verify_permitted_and_prohibited_changes\" >How should you verify permitted and prohibited changes?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/www.wehopower.com\/ur\/news\/tx4-w-parameter-lock-production-handover\/#What_happens_after_maintenance_or_a_recipe_change\" >What happens after maintenance or a recipe change?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/www.wehopower.com\/ur\/news\/tx4-w-parameter-lock-production-handover\/#What_should_an_OEM_include_in_a_lock-scope_enquiry\" >What should an OEM include in a lock-scope enquiry?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/www.wehopower.com\/ur\/news\/tx4-w-parameter-lock-production-handover\/#Engineering_FAQ\" >Engineering FAQ<\/a><ul class='ez-toc-list-level-3' ><li class='ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-9\" href=\"https:\/\/www.wehopower.com\/ur\/news\/tx4-w-parameter-lock-production-handover\/#Does_parameter_locking_prove_the_machine_settings_are_correct\" >Does parameter locking prove the machine settings are correct?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-10\" href=\"https:\/\/www.wehopower.com\/ur\/news\/tx4-w-parameter-lock-production-handover\/#Should_every_production_machine_use_the_highest_lock_level\" >Should every production machine use the highest lock level?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-11\" href=\"https:\/\/www.wehopower.com\/ur\/news\/tx4-w-parameter-lock-production-handover\/#Does_the_controller_lock_replace_electrical_isolation_for_maintenance\" >Does the controller lock replace electrical isolation for maintenance?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-12\" href=\"https:\/\/www.wehopower.com\/ur\/news\/tx4-w-parameter-lock-production-handover\/#Can_the_old_handover_record_be_reused_after_replacing_the_controller\" >Can the old handover record be reused after replacing the controller?<\/a><\/li><\/ul><\/li><\/ul><\/nav><\/div>\n<h2 id=\"what-decision-should-the-handover-team-make\"><span class=\"ez-toc-section\" id=\"What_decision_should_the_handover_team_make\"><\/span>What decision should the handover team make?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>The handover team should decide which verified settings must remain protected and which adjustments production personnel need to make. A controller can be locked in the wrong configuration, or locked so restrictively that legitimate process changes encourage an uncontrolled workaround. The appropriate decision combines configuration evidence, defined responsibilities and an actual interface check.<\/p>\n<p>The <a href=\"https:\/\/www.wehopower.com\/ur\/product\/tx4-series-tx4-w-economic-dual-display-pid-temperature-controller\/\">TX4-W temperature-controller information<\/a> identifies the horizontal front form used here. This article concerns production configuration control, rather than the panel cutout or a claim that the pictured machine has completed commissioning. The front photograph does not identify every rear input, supply or output option.<\/p>\n<h2 id=\"what-lock-scopes-does-the-tx4-manual-describe\"><span class=\"ez-toc-section\" id=\"What_lock_scopes_does_the_TX4_manual_describe\"><\/span>What lock scopes does the TX4 manual describe?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>The <a href=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2023\/11\/TX4.pdf\">TX4 230808EN instruction manual<\/a> describes a parameter-group lock with levels from 0 to 4. The table below summarizes the stated scope. Verify that the current manual and the supplied controller use this scheme before writing a work instruction.<\/p>\n<div class=\"table-scroll\" tabindex=\"0\" role=\"region\" aria-label=\"Scrollable engineering table\">\n<table>\n<thead>\n<tr>\n<th scope=\"col\">Lock level<\/th>\n<th scope=\"col\">Manual&#8217;s stated restriction<\/th>\n<th scope=\"col\">Handover question<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>0<\/td>\n<td>Unlocked<\/td>\n<td>Who is authorized to complete and verify configuration?<\/td>\n<\/tr>\n<tr>\n<td>1<\/td>\n<td>Parameter group P-3<\/td>\n<td>Does this cover the configuration items requiring restriction?<\/td>\n<\/tr>\n<tr>\n<td>2<\/td>\n<td>Groups P-3 and P-2<\/td>\n<td>Which remaining adjustments should production retain?<\/td>\n<\/tr>\n<tr>\n<td>3<\/td>\n<td>Groups P-3, P-2 and P-1<\/td>\n<td>Is routine set-value adjustment still intended?<\/td>\n<\/tr>\n<tr>\n<td>4<\/td>\n<td>Groups P-3, P-2, P-1 and SV setting<\/td>\n<td>How will an authorized recipe change be managed?<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>This is an interface restriction, not evidence that the stored input type, output choice, units, tuning or alarm configuration is suitable. Determine the correct configuration separately. A locked controller can consistently preserve an error that was never found during commissioning.<\/p>\n<p>Do not infer a broader security system from the word lock. The table does not establish individual user accounts, network permissions, an audit trail or a safety-rated protection function. Those requirements belong to the equipment design and the actual capabilities of its other components.<\/p>\n<figure class=\"article-figure product\" data-asset=\"product\"><a class=\"product-image-link\" href=\"https:\/\/www.wehopower.com\/ur\/product\/tx4-series-tx4-w-economic-dual-display-pid-temperature-controller\/\" aria-label=\"TX4-W details\"><img loading=\"lazy\" src=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/11\/tx4-w-production-parameter-lock-product.webp\" alt=\"TX4-W Parameter Locks: Verify Settings Before Production Handover  title=\" width=\"1000\" height=\"1000\" decoding=\"async\" tx4-w parameter locks: verify settings before production handover title =\"\"><\/a><figcaption>Official TX4-W product illustration. Front markings identify the form; complete options and applicable instructions require separate confirmation. <a href=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/11\/product-original-2.png\" target=\"_blank\" rel=\"noopener\">View original-resolution image<\/a><\/figcaption><\/figure>\n<h2 id=\"how-do-you-build-a-useful-settings-baseline\"><span class=\"ez-toc-section\" id=\"How_do_you_build_a_useful_settings_baseline\"><\/span>How do you build a useful settings baseline?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>A useful baseline links the actual controller to the approved machine configuration and the evidence that supports it. Record values as they are read back from the unit. A spreadsheet containing intended values is a design input until someone compares it with the supplied configuration.<\/p>\n<p>Identify the complete order code and applicable documentation before reading the baseline. Group the required records by purpose: measurement configuration, control behavior, alarm functions and permitted operator adjustment. Include the temperature unit and decimal convention so that a correct-looking number is not detached from its meaning.<\/p>\n<p>Do not treat the displayed front form as proof of a rear option. A TX4-W front reference helps identify the physical interface, while the rear identification and current documentation establish the ordered supply, input and outputs. Document a mismatch rather than copying a familiar setting from another size or another machine.<\/p>\n<h3 id=\"hypothetical-production-handover-example\"><span class=\"ez-toc-section\" id=\"Hypothetical_Production-Handover_Example\"><\/span>Hypothetical Production-Handover Example<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Assume a machine has a controlled six-item settings record. During read-back, three items match, two differ and one has not been verified. The completion ratio is three verified matches out of six required items, or 50%. This invented count is a record example, not a controller test or a release threshold.<\/p>\n<div class=\"table-scroll\" tabindex=\"0\" role=\"region\" aria-label=\"Scrollable engineering table\">\n<table>\n<thead>\n<tr>\n<th scope=\"col\">Required record<\/th>\n<th scope=\"col\">Illustrative finding<\/th>\n<th scope=\"col\">Required disposition<\/th>\n<th scope=\"col\">Lock implication<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Input configuration<\/td>\n<td>Matches the approved record<\/td>\n<td>Retain the read-back evidence<\/td>\n<td>Include in the defined protection scope<\/td>\n<\/tr>\n<tr>\n<td>Temperature unit<\/td>\n<td>Matches<\/td>\n<td>Keep the unit with all temperature values<\/td>\n<td>Do not rely on a bare number<\/td>\n<\/tr>\n<tr>\n<td>Approved set value<\/td>\n<td>Matches<\/td>\n<td>Define who may change the recipe<\/td>\n<td>Decide whether SV adjustment remains available<\/td>\n<\/tr>\n<tr>\n<td>Control configuration<\/td>\n<td>Differs<\/td>\n<td>Investigate and resolve under change control<\/td>\n<td>Do not lock the discrepancy into production<\/td>\n<\/tr>\n<tr>\n<td>Alarm configuration<\/td>\n<td>Differs<\/td>\n<td>Resolve and repeat affected verification<\/td>\n<td>A restriction does not validate the alarm path<\/td>\n<\/tr>\n<tr>\n<td>Selected lock scope<\/td>\n<td>Not verified<\/td>\n<td>Confirm the authorized scope and interface behavior<\/td>\n<td>Handover remains incomplete<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>The percentage does not authorize release. Even five matches out of six could leave one important error. The useful output is a closed disposition for every required record, together with evidence that the affected machine functions behave as intended. Do not turn a completeness score into a substitute for engineering judgment.<\/p>\n<figure class=\"article-figure technical\" data-asset=\"technical\">\n<div class=\"diagram-scroll\" tabindex=\"0\" role=\"region\" aria-label=\"Scrollable engineering diagram\"><img loading=\"lazy\" src=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/11\/tx4-w-production-parameter-lock-concept.svg\" alt=\"TX4-W Parameter Locks: Verify Settings Before Production Handover  title=\" width=\"1200\" height=\"900\" decoding=\"async\" tx4-w parameter locks: verify settings before production handover title =\"\"><\/div><figcaption>Conceptual Engineering Diagram. Configuration verification precedes lock-scope selection, and observed restrictions are recorded separately from machine protection. <a href=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/11\/tx4-w-production-parameter-lock-concept.svg\" target=\"_blank\" rel=\"noopener\">Open full-size diagram<\/a><\/figcaption><p class=\"figure-help\">Swipe horizontally on a small screen, or open the full-size diagram.<\/p>\n<\/figure>\n<h2 id=\"how-should-you-verify-permitted-and-prohibited-changes\"><span class=\"ez-toc-section\" id=\"How_should_you_verify_permitted_and_prohibited_changes\"><\/span>How should you verify permitted and prohibited changes?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Verify the selected restrictions against the production role requirement using an approved test method that does not introduce an uncontrolled process change. The record should show both what remains adjustable and what is restricted. An inaccessible menu alone says little about the availability of other settings.<\/p>\n<p>For a machine with approved operator recipe changes, define the permitted set-value envelope and the separate controls that enforce it. Choosing a lock level that leaves SV accessible is not evidence of a safe temperature range. Confirm how the equipment manages limits, process authorization and the consequences of a changed set value.<\/p>\n<p>For a fixed-recipe machine, define the process for an authorized change before the locked configuration is handed over. Identify the responsible role, the approved replacement record and the verification required afterward. Do not publish shared access details in a production-facing blog or assume that possession of a menu sequence establishes permission.<\/p>\n<ol>\n<li><strong>Freeze the intended configuration.<\/strong> Identify the machine, controller and revision of the approved settings record. Record outstanding discrepancies and the person responsible for resolving them.<\/li>\n<li><strong>Read back the actual values.<\/strong> Compare each required item with its approved value, including units and option identity. Keep evidence of both the expected and observed values; do not silently change the reference to match the unit.<\/li>\n<li><strong>Resolve differences before locking.<\/strong> Determine whether the unit, drawing or configuration needs correction. Repeat the affected functional checks under the equipment&#39;s procedure rather than assuming a numerical edit is sufficient.<\/li>\n<li><strong>Choose the authorized lock scope.<\/strong> Record which parameter groups and routine adjustments should be restricted. Check that this scope supports the actual operator and maintenance responsibilities.<\/li>\n<li><strong>Apply and verify the restriction.<\/strong> Use the applicable current instructions, then record the observed availability of representative permitted and prohibited settings. Avoid leaving a temporary test change in the production configuration.<\/li>\n<li><strong>Complete the handover record.<\/strong> Preserve the approved baseline, final read-back, lock scope, verification result and change-authorization route. A later service action should be traceable to this version.<\/li>\n<\/ol>\n<h2 id=\"what-happens-after-maintenance-or-a-recipe-change\"><span class=\"ez-toc-section\" id=\"What_happens_after_maintenance_or_a_recipe_change\"><\/span>What happens after maintenance or a recipe change?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>After an authorized change, recheck the affected settings and restrictions before treating the prior handover as current. A replacement controller, reset, input change or altered recipe can invalidate parts of the baseline even when the front display looks familiar. Define the scope of re-verification from what changed.<\/p>\n<p>Keep the previous version so that the service team can distinguish an intentional update from drift. Record the reason for the change and the resulting read-back. Restoring the old lock level without checking the underlying values can conceal a new configuration mismatch.<\/p>\n<p>Parameter restrictions also belong in the service instructions. A technician who encounters a restricted setting should have a clear route to obtain the current approved information and authorization. Repeatedly resetting a controller to get past an unfamiliar menu can remove the configuration evidence needed to understand the original fault.<\/p>\n<h2 id=\"what-should-an-oem-include-in-a-lock-scope-enquiry\"><span class=\"ez-toc-section\" id=\"What_should_an_OEM_include_in_a_lock-scope_enquiry\"><\/span>What should an OEM include in a lock-scope enquiry?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Provide the full controller identification, applicable manual, approved settings groups and the adjustments each role needs to make. State whether SV changes are part of normal production, and describe the verification evidence needed after maintenance. Separate those interface requirements from the machine&#39;s independent protective functions.<\/p>\n<p>Review the <a href=\"https:\/\/www.wehopower.com\/ur\/product\/tx4-series-tx4-w-economic-dual-display-pid-temperature-controller\/\">TX4-W controller and option reference<\/a>, then <a href=\"https:\/\/www.wehopower.com\/ur\/contact\/\">send WEHO the required configuration scope<\/a>. Ask for clarification where the supplied revision or menu behavior differs; do not assume that a common front layout proves identical configuration access.<\/p>\n<h2 id=\"engineering-faq\"><span class=\"ez-toc-section\" id=\"Engineering_FAQ\"><\/span>Engineering FAQ<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<h3 id=\"does-parameter-locking-prove-the-machine-settings-are-correct\"><span class=\"ez-toc-section\" id=\"Does_parameter_locking_prove_the_machine_settings_are_correct\"><\/span>Does parameter locking prove the machine settings are correct?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Parameter locking does not prove that the stored configuration is correct. Verify the baseline and relevant machine functions before applying the restriction. A lock can preserve an incorrect value as effectively as a correct one.<\/p>\n<h3 id=\"should-every-production-machine-use-the-highest-lock-level\"><span class=\"ez-toc-section\" id=\"Should_every_production_machine_use_the_highest_lock_level\"><\/span>Should every production machine use the highest lock level?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>The highest lock level is not automatically appropriate for every production role. Select the scope from the authorized adjustments and the actual equipment procedure. Document how legitimate recipe changes will be managed without uncontrolled configuration changes.<\/p>\n<h3 id=\"does-the-controller-lock-replace-electrical-isolation-for-maintenance\"><span class=\"ez-toc-section\" id=\"Does_the_controller_lock_replace_electrical_isolation_for_maintenance\"><\/span>Does the controller lock replace electrical isolation for maintenance?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>The controller parameter lock does not replace the equipment&#39;s electrical isolation or energy-control procedure. It restricts settings at the interface. Qualified personnel must use the appropriate equipment procedure before connecting, repairing or inspecting relevant circuits.<\/p>\n<h3 id=\"can-the-old-handover-record-be-reused-after-replacing-the-controller\"><span class=\"ez-toc-section\" id=\"Can_the_old_handover_record_be_reused_after_replacing_the_controller\"><\/span>Can the old handover record be reused after replacing the controller?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>A replacement controller requires an identification and configuration comparison before the old record can support release. Confirm the ordered options, applicable instructions, read-back values and selected restrictions. Reuse unaffected evidence only where the equipment&#39;s controlled process establishes that it remains applicable.<\/p>\n<\/div>","protected":false},"excerpt":{"rendered":"<p>Plan TX4-W parameter locks around an approved settings baseline. Verify permitted adjustments and read-back records, then send WEHO your control scope.<\/p>","protected":false},"author":2,"featured_media":21569,"parent":0,"menu_order":75,"comment_status":"","ping_status":"","template":"","format":"standard","meta":{"_acf_changed":false,"_joinchat":[],"footnotes":""},"news_category":[284],"class_list":["post-21598","news","type-news","status-publish","format-standard","has-post-thumbnail","hentry","news_category-product-articles","entry"],"acf":[],"post_mailing_queue_ids":[],"_links":{"self":[{"href":"https:\/\/www.wehopower.com\/ur\/wp-json\/wp\/v2\/news\/21598","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.wehopower.com\/ur\/wp-json\/wp\/v2\/news"}],"about":[{"href":"https:\/\/www.wehopower.com\/ur\/wp-json\/wp\/v2\/types\/news"}],"author":[{"embeddable":true,"href":"https:\/\/www.wehopower.com\/ur\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.wehopower.com\/ur\/wp-json\/wp\/v2\/comments?post=21598"}],"version-history":[{"count":0,"href":"https:\/\/www.wehopower.com\/ur\/wp-json\/wp\/v2\/news\/21598\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.wehopower.com\/ur\/wp-json\/wp\/v2\/media\/21569"}],"wp:attachment":[{"href":"https:\/\/www.wehopower.com\/ur\/wp-json\/wp\/v2\/media?parent=21598"}],"wp:term":[{"taxonomy":"news_category","embeddable":true,"href":"https:\/\/www.wehopower.com\/ur\/wp-json\/wp\/v2\/news_category?post=21598"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}