{"id":21998,"date":"2026-11-14T10:53:59","date_gmt":"2026-11-14T02:53:59","guid":{"rendered":"https:\/\/www.wehopower.com\/news\/tx4-m-manual-output-run-handover\/"},"modified":"2026-11-14T10:53:59","modified_gmt":"2026-11-14T02:53:59","slug":"tx4-m-manual-output-run-handover","status":"publish","type":"news","link":"https:\/\/www.wehopower.com\/ur\/news\/tx4-m-manual-output-run-handover\/","title":{"rendered":"TX4-M Manual Output: Verify the Return to RUN Mode"},"content":{"rendered":"<p><strong>Key Engineering Takeaways<\/strong><\/p>\n<ul>\n<li>TX4-M manual mode changes the controller output command; a percentage is not a heater-power measurement.<\/li>\n<li>The TX4 manual describes P00\u2013P100 adjustment and a key action to return to RUN mode.<\/li>\n<li>Define the permitted output change before transferring control back to the automatic loop.<\/li>\n<li>Verify the receiving device and process response, not only the display.<\/li>\n<\/ul>\n<figure class=\"article-figure hero\" data-asset=\"hero\"><a class=\"product-image-link\" href=\"https:\/\/www.wehopower.com\/ur\/product\/tx4-series-tx4-m-economic-dual-display-pid-temperature-controller\/\" aria-label=\"TX4-M details\"><img fetchpriority=\"high\" src=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/11\/tx4-m-manual-control-application-27c333c8c1.avif\" alt=\"TX4-M Manual Output: Verify the Return to RUN Mode  title=\" width=\"1200\" height=\"675\" loading=\"eager\" decoding=\"async\" tx4-m manual output: verify the return to run mode title =\"\"><\/a><figcaption>Application illustration; not a customer installation photo. Scene created with AI assistance. The original TX4-M display is retained and is not a manual-mode test result. <a href=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/11\/source-tx4-m-manual-control-application-1200x675-master-8a03253f.png\" target=\"_blank\" rel=\"noopener\">View original-resolution image<\/a><\/figcaption><\/figure>\n<div id=\"ez-toc-container\" class=\"ez-toc-v2_0_89 counter-hierarchy ez-toc-counter ez-toc-grey ez-toc-container-direction\">\n<div class=\"ez-toc-title-container\">\n<p class=\"ez-toc-title\" style=\"cursor:inherit\">\u0645\u0646\u062f\u0631\u062c\u0627\u062a \u06a9\u0627 \u062c\u062f\u0648\u0644<\/p>\n<span class=\"ez-toc-title-toggle\"><a href=\"#\" class=\"ez-toc-pull-right ez-toc-btn ez-toc-btn-xs ez-toc-btn-default ez-toc-toggle\" aria-label=\"Toggle Table of Content\"><span class=\"ez-toc-js-icon-con\"><span class=\"\"><span class=\"eztoc-hide\" style=\"display:none;\">\u0679\u0648\u06af\u0644 \u06a9\u0631\u06cc\u06ba\u06d4<\/span><span class=\"ez-toc-icon-toggle-span\"><svg style=\"fill: #999;color:#999\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" class=\"list-377408\" width=\"20px\" height=\"20px\" viewbox=\"0 0 24 24\" fill=\"none\"><path d=\"M6 6H4v2h2V6zm14 0H8v2h12V6zM4 11h2v2H4v-2zm16 0H8v2h12v-2zM4 16h2v2H4v-2zm16 0H8v2h12v-2z\" fill=\"currentColor\"><\/path><\/svg><svg style=\"fill: #999;color:#999\" class=\"arrow-unsorted-368013\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"10px\" height=\"10px\" viewbox=\"0 0 24 24\" version=\"1.2\" baseprofile=\"tiny\"><path d=\"M18.2 9.3l-6.2-6.3-6.2 6.3c-.2.2-.3.4-.3.7s.1.5.3.7c.2.2.4.3.7.3h11c.3 0 .5-.1.7-.3.2-.2.3-.5.3-.7s-.1-.5-.3-.7zM5.8 14.7l6.2 6.3 6.2-6.3c.2-.2.3-.5.3-.7s-.1-.5-.3-.7c-.2-.2-.4-.3-.7-.3h-11c-.3 0-.5.1-.7.3-.2.2-.3.5-.3.7s.1.5.3.7z\"\/><\/svg><\/span><\/span><\/span><\/a><\/span><\/div>\n<nav><ul class='ez-toc-list ez-toc-list-level-1' ><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-1\" href=\"https:\/\/www.wehopower.com\/ur\/news\/tx4-m-manual-output-run-handover\/#What_must_be_checked_when_an_operator_takes_manual_control\" >What must be checked when an operator takes manual control?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-2\" href=\"https:\/\/www.wehopower.com\/ur\/news\/tx4-m-manual-output-run-handover\/#What_does_the_TX4_manual_establish_about_manual_mode\" >What does the TX4 manual establish about manual mode?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-3\" href=\"https:\/\/www.wehopower.com\/ur\/news\/tx4-m-manual-output-run-handover\/#Why_does_P40_not_prove_40_percent_heater_power\" >Why does P40 not prove 40 percent heater power?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-4\" href=\"https:\/\/www.wehopower.com\/ur\/news\/tx4-m-manual-output-run-handover\/#Which_observations_distinguish_a_command_change_from_a_successful_handover\" >Which observations distinguish a command change from a successful handover?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-5\" href=\"https:\/\/www.wehopower.com\/ur\/news\/tx4-m-manual-output-run-handover\/#How_should_the_transition_be_verified\" >How should the transition be verified?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-6\" href=\"https:\/\/www.wehopower.com\/ur\/news\/tx4-m-manual-output-run-handover\/#What_should_be_controlled_when_the_procedure_is_repeated\" >What should be controlled when the procedure is repeated?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-7\" href=\"https:\/\/www.wehopower.com\/ur\/news\/tx4-m-manual-output-run-handover\/#What_information_should_be_sent_to_WEHO\" >What information should be sent to WEHO?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-2'><a class=\"ez-toc-link ez-toc-heading-8\" href=\"https:\/\/www.wehopower.com\/ur\/news\/tx4-m-manual-output-run-handover\/#Engineering_FAQ\" >Engineering FAQ<\/a><ul class='ez-toc-list-level-3' ><li class='ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-9\" href=\"https:\/\/www.wehopower.com\/ur\/news\/tx4-m-manual-output-run-handover\/#Does_P00_provide_electrical_isolation\" >Does P00 provide electrical isolation?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-10\" href=\"https:\/\/www.wehopower.com\/ur\/news\/tx4-m-manual-output-run-handover\/#Is_P50_a_measurement_of_half_the_heater_power\" >Is P50 a measurement of half the heater power?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-11\" href=\"https:\/\/www.wehopower.com\/ur\/news\/tx4-m-manual-output-run-handover\/#Does_returning_to_RUN_guarantee_an_unchanged_output\" >Does returning to RUN guarantee an unchanged output?<\/a><\/li><li class='ez-toc-page-1 ez-toc-heading-level-3'><a class=\"ez-toc-link ez-toc-heading-12\" href=\"https:\/\/www.wehopower.com\/ur\/news\/tx4-m-manual-output-run-handover\/#Which_result_should_be_kept_after_a_manual_intervention\" >Which result should be kept after a manual intervention?<\/a><\/li><\/ul><\/li><\/ul><\/nav><\/div>\n<h2 id=\"what-must-be-checked-when-an-operator-takes-manual-control\"><span class=\"ez-toc-section\" id=\"What_must_be_checked_when_an_operator_takes_manual_control\"><\/span>What must be checked when an operator takes manual control?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Check who controls the output before, during and after the intervention. Manual mode can be useful during an authorized commissioning task, but it changes the relationship between the measured temperature and the command reaching the external switching device. An output that is deliberate during a test may be unsuitable once production resumes.<\/p>\n<p>For an OEM controls engineer using the <a href=\"https:\/\/www.wehopower.com\/ur\/product\/tx4-series-tx4-m-economic-dual-display-pid-temperature-controller\/\">TX4-M PID temperature controller<\/a>, the decision is how to release a manual-to-automatic handover. Define the required starting condition, allowed process excursion and final operating state. This article describes a verification method; it does not report a completed TX4-M transfer test.<\/p>\n<p>A displayed RUN state is one observation. The external relay, SSR, contactor or other receiving circuit must also respond as intended. Its wiring, logic and actual power path belong in the same commissioning record.<\/p>\n<h2 id=\"what-does-the-tx4-manual-establish-about-manual-mode\"><span class=\"ez-toc-section\" id=\"What_does_the_TX4_manual_establish_about_manual_mode\"><\/span>What does the TX4 manual establish about manual mode?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>The <a href=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2023\/11\/TX4.pdf\">TX4 instruction manual, revision TX4 230808EN<\/a> includes a manual-mode shortcut. It describes entering manual mode with a three-second key action, modifying output within P00\u2013P100 using the adjustment keys, and pressing the mode key once to exit manual mode and return to RUN. Follow the illustrated key symbols on the applicable unit.<\/p>\n<p>These instructions establish an available operating function. They do not establish the output immediately before entry, the command selected on every entry, a transition time, or a guaranteed disturbance-free return. Do not add a claim of automatic matching between manual and automatic output when the documentation does not provide it.<\/p>\n<p>The output-selection parameter remains relevant. Relay and SSR-drive options are different interfaces, so confirm the complete controller code, configuration and external receiving circuit. A photograph of the TX4-M front identifies the enclosure form, without proving a particular supply or rear-terminal option.<\/p>\n<figure class=\"article-figure product\" data-asset=\"product\"><a class=\"product-image-link\" href=\"https:\/\/www.wehopower.com\/ur\/product\/tx4-series-tx4-m-economic-dual-display-pid-temperature-controller\/\" aria-label=\"TX4-M details\"><img loading=\"lazy\" src=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/11\/tx4-m-product-reference-9f4c16cbac.avif\" alt=\"TX4-M Manual Output: Verify the Return to RUN Mode  title=\" width=\"1000\" height=\"1000\" decoding=\"async\" tx4-m manual output: verify the return to run mode title =\"\"><\/a><figcaption>Official TX4-M product photograph. Original product markings are retained; configuration and operating claims require the applicable product documentation. <a href=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/11\/source-tx4-m-official-9dc8529e.png\" target=\"_blank\" rel=\"noopener\">View original-resolution image<\/a><\/figcaption><\/figure>\n<h2 id=\"why-does-p40-not-prove-40-percent-heater-power\"><span class=\"ez-toc-section\" id=\"Why_does_P40_not_prove_40_percent_heater_power\"><\/span>Why does P40 not prove 40 percent heater power?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>An output percentage is a controller command. Actual heater power depends on how the receiving circuit interprets that command, the switching method, supply conditions and the load. A time-proportioned switching arrangement may connect a defined command to an ON-time ratio, but that relationship must be established for the actual interface.<\/p>\n<p>Consider a <strong>Hypothetical Manual-Output Example<\/strong>. An OEM uses a heater whose rated power is 1,000 W at its specified supply voltage. The commissioning plan requests a 40% switching duty under controlled conditions. If the heater receives its rated voltage during each ON interval and its behavior supports that model, the ideal average electrical input is:<\/p>\n<p>Average power = 1,000 W \u00d7 0.40 = 400 W.<\/p>\n<p>This calculation is a conditional load model. It is not a TX4-M measurement, a promise that every P40 indication produces 400 W, or a prediction of process temperature. An SSR that remains conducting, a relay that does not operate or an incorrectly interpreted command invalidates the simple model.<\/p>\n<p>Thermal output also has a history. A tool can continue warming after the electrical command falls because heat stored in surrounding material still moves toward the sensor. A declining command therefore does not prove that the process has stopped rising in temperature.<\/p>\n<h2 id=\"which-observations-distinguish-a-command-change-from-a-successful-handover\"><span class=\"ez-toc-section\" id=\"Which_observations_distinguish_a_command_change_from_a_successful_handover\"><\/span>Which observations distinguish a command change from a successful handover?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Record the command and receiver separately. The table below is a proposed commissioning structure; it contains no observed results. Populate it with the actual unit and approved process limits.<\/p>\n<div class=\"table-scroll\" tabindex=\"0\" role=\"region\" aria-label=\"Scrollable engineering table\">\n<table>\n<thead>\n<tr>\n<th scope=\"col\">\u0627\u0633\u0679\u06cc\u062c<\/th>\n<th scope=\"col\">Controller record<\/th>\n<th scope=\"col\">Receiver record<\/th>\n<th scope=\"col\">Release question<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Before intervention<\/td>\n<td>Mode, PV, SV and output selection<\/td>\n<td>Actual switching or command state<\/td>\n<td>Is manual intervention authorized?<\/td>\n<\/tr>\n<tr>\n<td>Manual operation<\/td>\n<td>Requested output and displayed setting<\/td>\n<td>Response to the requested change<\/td>\n<td>Does the receiver follow the command?<\/td>\n<\/tr>\n<tr>\n<td>Return to RUN<\/td>\n<td>Mode transition and resulting command<\/td>\n<td>Any abrupt or delayed response<\/td>\n<td>Is the transition within the process limit?<\/td>\n<\/tr>\n<tr>\n<td>After stabilization<\/td>\n<td>PV, SV and automatic operation<\/td>\n<td>Normal switching behavior<\/td>\n<td>Can the equipment return to its intended duty?<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>Choose an observation interval that can capture the transition of interest. A handwritten value taken several seconds later can miss a short command change. Conversely, a switching event alone cannot show whether the thermal process remains within its approved operating conditions.<\/p>\n<p>Keep unrelated changes out of the comparison. Changing SV, output selection and manual command together can make the response difficult to interpret. If the actual intervention requires several changes, document their order and the reason for each one.<\/p>\n<figure class=\"article-figure technical\" data-asset=\"technical\">\n<div class=\"diagram-scroll\" tabindex=\"0\" role=\"region\" aria-label=\"Scrollable engineering diagram\"><img loading=\"lazy\" src=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/11\/tx4-m-manual-run-handover-b39c7f7745.svg\" alt=\"TX4-M Manual Output: Verify the Return to RUN Mode  title=\" width=\"1200\" height=\"675\" decoding=\"async\" tx4-m manual output: verify the return to run mode title =\"\"><\/div><figcaption>Conceptual Engineering Diagram. TX4-M control ownership changes during manual operation and return to RUN; verify the actual receiver and process response. <a href=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/11\/source-tx4-m-manual-run-handover-b39c7f77.svg\" target=\"_blank\" rel=\"noopener\">Open full-size diagram<\/a><\/figcaption><p class=\"figure-help\">Swipe horizontally on a small screen, or open the full-size diagram.<\/p>\n<\/figure>\n<h2 id=\"how-should-the-transition-be-verified\"><span class=\"ez-toc-section\" id=\"How_should_the_transition_be_verified\"><\/span>How should the transition be verified?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<ol>\n<li>Identify the complete controller marking, manual revision, input configuration and receiving circuit. Record the existing PV, SV and output mode before the intervention.<\/li>\n<li>Define the permitted manual command, duration and process conditions. Where appropriate, begin with an isolated receiver or suitable simulated process input under the equipment commissioning procedure.<\/li>\n<li>Enter manual mode using the applicable instructions. Record the displayed state and actual receiver response before increasing the command.<\/li>\n<li>Change the command only within the approved test conditions. Capture the command and receiver behavior together, including any discrepancy.<\/li>\n<li>Return to RUN using the documented key action. Observe the immediate response and subsequent process behavior against the predetermined limits.<\/li>\n<li>Restore the intended operating configuration and document permission to resume duty. Retain any unexplained transition as an unresolved commissioning issue.<\/li>\n<\/ol>\n<p>Work on power wiring requires the equipment isolation procedure and qualified personnel. The manual-mode command is an operating control; it is not an isolating device. The test should not depend on changing a displayed percentage to make a hazardous energy path safe.<\/p>\n<h2 id=\"what-should-be-controlled-when-the-procedure-is-repeated\"><span class=\"ez-toc-section\" id=\"What_should_be_controlled_when_the_procedure_is_repeated\"><\/span>What should be controlled when the procedure is repeated?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Keep the tested starting conditions with the result. Initial PV, SV, control type, output selection, external switching arrangement and load state can all affect what happens after the return to automatic operation. A result from one configuration should not silently qualify a different machine.<\/p>\n<p>The <a href=\"https:\/\/www.wehopower.com\/ur\/product\/tx4-series-tx4-m-economic-dual-display-pid-temperature-controller\/\">TX4-M controller configuration information<\/a> provides a product reference for the review. Use it with the actual device marking and applicable connections. Avoid changing relay\/SSR selection merely to reproduce the appearance of another installation.<\/p>\n<p>A replacement controller, changed receiving device or revised commissioning sequence should reopen the affected transition checks. The useful question is whether the new arrangement follows the required cause-and-effect relationship, rather than whether the front panel still looks familiar.<\/p>\n<p>Use the <a href=\"https:\/\/www.wehopower.com\/wp-content\/uploads\/2026\/11\/manual-output-handover.csv\">manual-output handover worksheet<\/a> to keep the operating states and acceptance decision together. Its blank result fields require actual observations; the worksheet itself does not certify that a transfer has passed.<\/p>\n<h2 id=\"what-information-should-be-sent-to-weho\"><span class=\"ez-toc-section\" id=\"What_information_should_be_sent_to_WEHO\"><\/span>What information should be sent to WEHO?<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<p>Send the complete TX4-M marking, manual revision, input type, control-output selection, receiving-device information and the sequence that produced the concern. Include synchronized observations of the displayed mode, requested output, actual receiver and process response.<\/p>\n<p><a href=\"https:\/\/www.wehopower.com\/ur\/contact\/\">Contact WEHO about the TX4-M configuration<\/a> with the operating limits and the transition question. Ask for clarification of documented controller behavior while keeping machine acceptance and permission to resume the process with the responsible engineering team.<\/p>\n<h2 id=\"engineering-faq\"><span class=\"ez-toc-section\" id=\"Engineering_FAQ\"><\/span>Engineering FAQ<span class=\"ez-toc-section-end\"><\/span><\/h2>\n<h3 id=\"does-p00-provide-electrical-isolation\"><span class=\"ez-toc-section\" id=\"Does_P00_provide_electrical_isolation\"><\/span>Does P00 provide electrical isolation?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>P00 is an output command and does not establish electrical isolation. Apply the machine isolation procedure before work on wiring or power components. A failed external switching device can remain energized independently of the displayed command.<\/p>\n<h3 id=\"is-p50-a-measurement-of-half-the-heater-power\"><span class=\"ez-toc-section\" id=\"Is_P50_a_measurement_of_half_the_heater_power\"><\/span>Is P50 a measurement of half the heater power?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>P50 is a controller-output setting, not a power measurement. Actual power depends on the interface, switching behavior, load and supply conditions. Verify the receiving circuit before using a duty-based power model.<\/p>\n<h3 id=\"does-returning-to-run-guarantee-an-unchanged-output\"><span class=\"ez-toc-section\" id=\"Does_returning_to_RUN_guarantee_an_unchanged_output\"><\/span>Does returning to RUN guarantee an unchanged output?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>The cited TX4 manual describes returning to RUN but does not provide a guaranteed unchanged-output transition. Define and observe the permitted response for the installed configuration, including the external receiving device.<\/p>\n<h3 id=\"which-result-should-be-kept-after-a-manual-intervention\"><span class=\"ez-toc-section\" id=\"Which_result_should_be_kept_after_a_manual_intervention\"><\/span>Which result should be kept after a manual intervention?<span class=\"ez-toc-section-end\"><\/span><\/h3>\n<p>Keep the before, during and after controller states together with the actual receiver response and process disposition. A final display photograph alone cannot establish how the equipment behaved during the transition.<\/p>","protected":false},"excerpt":{"rendered":"<p>Check TX4-M manual output and the return to RUN mode. Separate output percentage from heater power, then send WEHO your controller and interface details.<\/p>","protected":false},"author":2,"featured_media":21946,"parent":0,"menu_order":47,"comment_status":"","ping_status":"","template":"","format":"standard","meta":{"_acf_changed":false,"_joinchat":[],"footnotes":""},"news_category":[284],"class_list":["post-21998","news","type-news","status-publish","format-standard","has-post-thumbnail","hentry","news_category-product-articles","entry"],"acf":[],"post_mailing_queue_ids":[],"_links":{"self":[{"href":"https:\/\/www.wehopower.com\/ur\/wp-json\/wp\/v2\/news\/21998","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.wehopower.com\/ur\/wp-json\/wp\/v2\/news"}],"about":[{"href":"https:\/\/www.wehopower.com\/ur\/wp-json\/wp\/v2\/types\/news"}],"author":[{"embeddable":true,"href":"https:\/\/www.wehopower.com\/ur\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.wehopower.com\/ur\/wp-json\/wp\/v2\/comments?post=21998"}],"version-history":[{"count":0,"href":"https:\/\/www.wehopower.com\/ur\/wp-json\/wp\/v2\/news\/21998\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.wehopower.com\/ur\/wp-json\/wp\/v2\/media\/21946"}],"wp:attachment":[{"href":"https:\/\/www.wehopower.com\/ur\/wp-json\/wp\/v2\/media?parent=21998"}],"wp:term":[{"taxonomy":"news_category","embeddable":true,"href":"https:\/\/www.wehopower.com\/ur\/wp-json\/wp\/v2\/news_category?post=21998"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}