| Προσδιορισμός | S-400-5 | S-400-12 | S-400-24 | S-400-48 |
| DC τάση εξόδου, ρεύμα | 5V0～60A | 12V0～33A | 24V 0～16.5A | 48V 0~8,3A |
| Κύμα και θόρυβος | 100mVp-P | 150mVp-P | 150mVp-P | 200mVp-P |
| Σταθερότητα καλωδίου εισόδου | ±0,5% | ±0,5% | ±0,5% | ±0,5% |
| Σταθερότητα φορτίου | ±1% | ±0,5% | ±0,5% | ±0,5% |
| Αποδοτικότητα | 0.73 | 0.82 | 0.83 | 0.85 |
| Ρυθμιζόμενο εύρος για τάση DC | ±10% | ±10% | ±10% | ±10% |
| Εύρος τάσης εισόδου | 90～132VAC/180～264VAC by switch 254～370VDC 47~63Hz | |||
| Ρεύμα κρούσης | Cold start current 25A/115VAC 50A/230VAC | |||
| Προστασία υπερφόρτωσης | 105%～135%κόψτε την έξοδο, αυτόματη ανάκτηση | |||
| Προστασία από υπέρταση | 115%～150%shut down O/P voltage,re-power on to recover | |||
| Ρύθμιση, άνοδος, χρόνος αναμονής | 200ms,50ms,20ms/230VAC at full load | |||
| Αντοχή στην τάση | I/P-O/P:1,5kV I/P-FG:1,5kV O/P-FG:0,5kV 1 λεπτό | |||
| Αντοχή στην απομόνωση | I/P-O/P I/P-FG O/P-FG:500VDC/100MΩ | |||
| Θερμοκρασία εργασίας | -10℃~+50℃ | |||
| Διάσταση | 215×115×50mm | |||
| Βάρος | 1.1kg | |||
| Συσκευασία | 45.5×31.5×26CM/20PCS/22kg | |||
S-400W series normal single switching power supply
WeHo professional 400W Switching CNC Power Supply can be widely used in Industrial Automation and CNC Stepper/Servo Systems.
115/230V AC range selectable by the switch, air cooling by the built-in fan.Filter capacitance; High withstand voltage; Low dissipation; Large capacity.Widely being used in Industrial automation, LED display, electronic equipment, communications, etc.If you have any questions, please do not hesitate to contact us at E-mail: [email protected]
- Περιγραφή
The white cap on the connector is for safety precautions against electric shock and dust protection.
All products go through standardized testing procedures during production.
Input voltage of this product: 90-132/180-264VAC, changed by the switch.
Αυτό το προϊόν διαθέτει ενσωματωμένες λειτουργίες προστασίας από υπερ/υπό τάση, υπερφόρτωση, υπερφόρτωση, υπερφόρτωση, υπερθέρμανση και βραχυκύκλωμα.
Το προϊόν μπορεί να ψυχθεί με μεταφορά φυσικού αέρα.
The product’s output ripple noise is 100MV.
Product voltage adjustment: ±10%
Το προϊόν έχει ολοκληρώσει τη δοκιμή γήρανσης πλήρους φορτίου 100%.
Product size: 215*115*50mm (L * W * H)
Συχνές ερωτήσεις
Q1: How do I determine whether a 400W switching power supply is sufficient for my equipment?
Calculate the maximum power consumption of all connected devices and compare it with the power supply’s rated capacity. The total continuous load should stay below 400W, while additional headroom should be reserved for startup current, temporary load increases, and high-temperature operation.
Q2: What applications can use the S-400W switching power supply?
The S-400W series is suitable for industrial automation, machinery, control systems, LED equipment, communication devices, electronic equipment, and other systems that require a stable single DC output.
Q3: How much power headroom should I leave when using a 400W power supply?
The correct power margin depends on the application, but continuously operating at the absolute maximum rating is generally not recommended. Equipment with motors, relays, capacitive loads, or other high-startup-current components may require more headroom.
Q4: What are the advantages of a 400W switch mode power supply?
A 400W switching power supply provides good power density, high efficiency, compact size, and lower heat loss compared with many linear power supplies. These characteristics make it practical for industrial equipment and control systems with limited installation space.
Q5: How do I choose the correct output voltage for the S-400W series?
The output voltage must match the rated DC input voltage of the connected equipment. Before ordering, check the equipment specification, maximum current requirement, wiring distance, and total power demand. Using the wrong voltage can damage the connected load.
Ποια είναι τα καλύτερα προϊόντα Power Supply για την επιχείρησή σας;
Ενισχύστε την επιχείρησή σας με ποιοτικά προϊόντα τροφοδοσίας WEHO.
Ρωτήστε έναν ειδικό