S-800W series normal single switching power supply

WeHo professional 800W Switching CNC Power Supply can be widely used in Industrial Automation and CNC Stepper/Servo Systems.
115V and 230V can be chosen by the switch.Powerful functions(eg. PWM control) and professional designs (Built-in big fan for cooling) ensure high efficiency and high reliability of the power supply.Low cost also makes it more acceptable for general usage.If you have any questions, please do not hesitate to contact us at E-mail: [email protected]

Κατεβάζω Ζητήστε μια προσφορά

Περιγραφή

Προδιαγραφές & Μοντέλο

Προσδιορισμός	S-800-12	S-800-24	S-800-36	S-800-48
DC τάση εξόδου, ρεύμα	12V 0～66A	24V 0～33A	36V 0~22A	48V 0～17A
Κύμα και θόρυβος	150mVp-P	180mVp-P	180mVp-P	240mVp-P
Σταθερότητα καλωδίου εισόδου	±0,5%	±0,5%	±0,5%	±0,5%
Σταθερότητα φορτίου	±0,5%	±0,5%	±0,5%	±0,5%
Αποδοτικότητα	0.8	0.85	0.85	0.87
Ρυθμιζόμενο εύρος για τάση DC	±10%	±10%	±10%	±10%
Εύρος τάσης εισόδου	100～132VAC/200～264VAC by switch 254～370VDC 47～63Hz
Ρεύμα κρούσης	Cold start current 45A/230VAC
Προστασία υπερφόρτωσης	105%～135%cut off the output,automatic recovery
Άλλη προστασία	Over current protection/Short-circuit protection
Ρύθμιση, άνοδος, χρόνος αναμονής	2000ms,50ms,20ms/230VAC at full load
Αντοχή στην τάση	I/P-O/P:1,5kV I/P-FG:1,5kV O/P-FG:0,5kV 1 λεπτό
Αντοχή στην απομόνωση	I/P-O/P I/P-FG O/P-FG:500VDC/100MΩ
Θερμοκρασία εργασίας	-10℃~+50℃
Διάσταση	291×132×68mm
Βάρος	2.65kg
Συσκευασία	37.5×31×25.5CM/6PCS/16kg

Σχέδιο

Χαρακτηριστικά

This product has an integrated design that minimizes temperature rise and calorific value.

Weho stocks 200,000 sets of commonly used models, ensuring quick delivery.

The product is highly stable, the workmanship is steady, the output voltage is consistent, and there is no drift.

Αυτό το προϊόν έχει ελάχιστη ποσότητα παραγγελίας 100 τεμάχια και μπορεί να προσαρμοστεί με ετικέτες.

This product has Automatic Recovery short-circuit protection.

Αυτό το προϊόν είναι τόσο χαμηλού κόστους όσο και αξιόπιστο.

Αυτό το προϊόν καλύπτεται από 24 μήνες εγγύηση.

Product size: 291*132*68mm (L * W * H)

U.S. Switching Power Supply Manufacturers

By reducing the operating current and junction temperature, the stress of the device can be reduced and the reliability of the product can be greatly improved.

Modularization is the general trend in the development of switching power supply.

Distributed power supply systems can be composed of a modular power supply, N+1 redundant power supply system can be designed, and the capacity expansion of parallel mode can be realized.

In view of the disadvantage of high operating noise of switching power supply, if high frequency is pursued alone, its noise will also increase.

The partial resonance conversion circuit technology can theoretically achieve high frequency and reduce noise.

However, there are still technical problems in the practical application of partial resonance conversion technology, so a lot of work still needs to be done in this field to make many technologies practical.