Fuente de alimentación conmutada de carril Din EDR-240 240W 24V 48V fuente de alimentación Industrial de CA a CC
EDR-120 is one economical slim 120W Din Rail Power Supply Series, adapt to be installed on TS-35/7.5 or TS-35/15 mounting Rails.
The entire series adopts the full range AC input from 90VAC to 264VAC. body is designed 40mm is width,which allows space saving inside the cabinetsEDR-120 is designed with metal housing that enhances the unit’s power dissipation with working efficiency up to 88.5%,the entire series can operate at the ambient tem[erature between -20℃ and 60℃ under air convectionIt is equipped with constant current mode for over-load protection,fitting various inductive or capacitive applications.If you have any questions, please do not hesitate to contact us atCorreo electrónico: [email protected]
- Descripción
| Modelo | EDR-240-24 | EDR-240-48 |
| Tensión de salida CC, corriente | 24V 0～10A | 48V 0～5A |
| Ola y ruido | 150mVp-p | 150mVp-p |
| Estabilidad del cable de entrada | ±0,5% | ±0,5% |
| Estabilidad de carga | ±1% | ±0,5% |
| Eficiencia | 87.5% | 85% |
| Rango ajustable para voltaje CC | ±10% | 士10% |
| Rango de voltaje de entrada | 85～264VAC 120～370VDC 47～63Hz | |
| corriente de impacto | Cold start current | 27A/115VAC 45A/230VAC |
| Protección contra sobrecarga | 105%～150%corta la salida, recuperación automática | |
| Protección contra sobretensión | 30～36V for 24V model;54～60V for 48V model | |
| Preparar, levantarse, esperar el tiempo | 1500ms,100ms /230VACat full load | |
| Voltaje de soporte | I/P-O/P:1,5 kV I/P-FG:1,5 kV O/P-FG:0,5 kV 1 minuto | |
| lsolation resistance | I/P-O/P I/P-FG O/P-FG: 500 VCC/100 MΩ | |
| Temperatura de trabajo | -10℃~+50℃ | |
| Dimensión | 63*125.2*113.5mm | |
| Peso | 1.0kg | |
| Embalaje | 41.5×27.5×25CM | |
Protections: Short circuit / Overload / Over voltage / Over temperature
Nuestros productos cuentan con la certificación CE ROHS para garantizar la calidad.
The EDR din rail 120w AC to DC circuit output switching power supply is a semiconductor manufacturing equipment.
Este producto se puede utilizar en sistemas de control industrial.
Automatización de fábrica
Preguntas frecuentes
Q1: How do I choose between the 24V and 48V versions of the EDR-240 DIN rail power supply?
Select the output voltage according to the DC voltage required by the connected equipment. 24V DC is widely used in PLCs, relays, sensors, control systems, and industrial automation. A 48V version is suitable for equipment designed around a 48V DC bus or applications where higher DC voltage is required.
Q2: What industrial equipment can the EDR-240 power?
The EDR-240 can supply PLCs, sensors, relays, communication modules, control devices, industrial electronics, automation equipment, and other compatible DC loads. The total load must remain within the 240W rated power and output current capacity.
Q3: What are the advantages of a DIN rail switching power supply?
DIN rail power supplies can be mounted directly inside standard industrial control cabinets, making installation, wiring, maintenance, and replacement more convenient. They also help maintain an organized control panel layout and reduce installation space.
Q4: How much load can a 240W DIN rail power supply support?
The maximum load depends on the output voltage. Calculate current using the relationship between power, voltage, and current, then ensure the connected load remains below the rated output. Additional margin should be allowed for startup current and continuous industrial operation.
Q5: What should I provide when requesting an EDR-240 quotation?
Provide the required output voltage, input voltage, connected load, application, operating environment, quantity, and any specific installation requirements. This information allows faster confirmation of the correct 24V or 48V configuration.
¿Cuáles son los mejores productos de fuentes de alimentación para su empresa?
Impulsa tu negocio con productos de suministro de energía de calidad WEHO.
Pregúntale a un experto