Fonte de alimentação de comutação em trilho Din EDR-240 240W 24V 48V Industrial AC para fonte de alimentação DC
EDR-120 is one economical slim 120W Din Rail Power Supply Series, adapt to be installed on TS-35/7.5 or TS-35/15 mounting Rails.
The entire series adopts the full range AC input from 90VAC to 264VAC. body is designed 40mm is width,which allows space saving inside the cabinetsEDR-120 is designed with metal housing that enhances the unit’s power dissipation with working efficiency up to 88.5%,the entire series can operate at the ambient tem[erature between -20℃ and 60℃ under air convectionIt is equipped with constant current mode for over-load protection,fitting various inductive or capacitive applications.If you have any questions, please do not hesitate to contact us atE-mail: [email protected]
- Descrição
| Modelo | EDR-240-24 | EDR-240-48 |
| Tensão de saída CC, corrente | 24V 0～10A | 48V 0～5A |
| Onda e ruído | 150mVp-p | 150mVp-p |
| Estabilidade do fio de entrada | ±0,5% | ±0,5% |
| Estabilidade de carga | ±1% | ±0,5% |
| Eficiência | 87.5% | 85% |
| Faixa ajustável para tensão DC | ±10% | 士10% |
| Faixa de tensão de entrada | 85～264VAC 120～370VDC 47～63Hz | |
| corrente de impacto | Cold start current | 27A/115VAC 45A/230VAC |
| Proteção de sobrecarga | 105% ~ 150% corta a saída, recuperação automática | |
| Proteção contra sobretensão | 30～36V for 24V model;54～60V for 48V model | |
| Configurar, subir, esperar o tempo | 1500ms,100ms /230VACat full load | |
| Suportar tensão | I/P-O/P:1,5kV I/P-FG:1,5kV O/P-FG:0,5kV 1 minuto | |
| lsolation resistance | I/P-O/P I/P-FG O/P-FG:500VDC/100MΩ | |
| Temperatura de trabalho | -10℃~+50℃ | |
| Dimensão | 63*125.2*113.5mm | |
| Peso | 1.0kg | |
| Embalagem | 41.5×27.5×25CM | |
Proteção: Curto-circuito/Sobrecarga/Sobretensão/Temperatura
Nossos produtos possuem certificação CE ROHS para garantir a qualidade.
O EDR din rail 120w AC para DC fonte de alimentação de comutação de saída de circuito é um equipamento de fabricação de semicondutores.
Este produto pode ser utilizado em sistemas de controle industrial.
Automação de fábrica
Perguntas frequentes
Q1: How do I choose between the 24V and 48V versions of the EDR-240 DIN rail power supply?
Select the output voltage according to the DC voltage required by the connected equipment. 24V DC is widely used in PLCs, relays, sensors, control systems, and industrial automation. A 48V version is suitable for equipment designed around a 48V DC bus or applications where higher DC voltage is required.
Q2: What industrial equipment can the EDR-240 power?
The EDR-240 can supply PLCs, sensors, relays, communication modules, control devices, industrial electronics, automation equipment, and other compatible DC loads. The total load must remain within the 240W rated power and output current capacity.
Q3: What are the advantages of a DIN rail switching power supply?
DIN rail power supplies can be mounted directly inside standard industrial control cabinets, making installation, wiring, maintenance, and replacement more convenient. They also help maintain an organized control panel layout and reduce installation space.
Q4: How much load can a 240W DIN rail power supply support?
The maximum load depends on the output voltage. Calculate current using the relationship between power, voltage, and current, then ensure the connected load remains below the rated output. Additional margin should be allowed for startup current and continuous industrial operation.
Q5: What should I provide when requesting an EDR-240 quotation?
Provide the required output voltage, input voltage, connected load, application, operating environment, quantity, and any specific installation requirements. This information allows faster confirmation of the correct 24V or 48V configuration.
Quais são os melhores produtos de fonte de alimentação para o seu negócio?
Impulsione o seu negócio com produtos de fonte de alimentação de qualidade WEHO.
Pergunte a um especialista