24V to 12V 60A 720W DC to DC Converter

The WEHO WH-C241260 is our high-capacity solution for stepping down 24VDC to a regulated 12VDC output at a massive 60A. Providing 720W of rated power, this module maintains a superior 95% conversion efficiency and an impressively low no-load power consumption of less than 3W. Housed in a fully waterproof aluminum frame, the unit utilizes natural cooling to manage a temperature rise of 45°C under full load. It includes advanced protection features, such as over-current protection with automatic recovery and short-circuit protection requiring a 42A input fuse. With a precision 1% voltage tolerance and a long-term reliability of over 100,000 hours, the WH-C241260 is engineered to handle the most demanding 12V loads in 24V industrial environments.

Correo electrónico: [email protected]

Nuestros profesionales te responderán lo antes posible.

Solicitar una cotización

Descripción

Resumen
Rated output: power 720W
Input voltage: 24VDC
Wire Length: 160mm±10mm

General specification

Modelo	WH-C241260
Potencia de salida nominal (W)	720W
Rated input voltage (V)	24VDC
Rated output voltage (V)	12 VCC
Input voltage range (V)	18V-32VDC
Input starting voltage (V)	18VDC 100%Load
No-load power consumption (W)	< 3W
Eficiencia	95%
Output voltage (V)	V SALIDA: 12 VCC
Output current (A)	60A
Tolerancia de voltaje	1%
Load regulation	3%
Ola (MVP-p)	150mv External 22UF capacitor ESR < 0. 1 Ω 100KHZ
Protección contra sobrecorriente	In the case of rated output, if the current exceeds 150% of the rated current, the overcurrent protection will act, and it will automatically recover after the overcurrent disappears.
Output short circuit protection	Input requires adding a 42A fuse
Input-output	No aislado
Impermeable	Totalmente sellado e impermeable
Dimensión	150×127×63mm
N.W.	1500g
Cooling method	Método Natural
Rated temperature rise (℃)	45 ℃
Fiabilidad	>100000h
Wire indicator	ut positive (red) 12AWG, input/output negative (black) 12AWG, output positive (yellow) 12AWG, lead length=160mm±10mm