| Modelo | Producción | Tolerance Voltage | Ripple and Noise | Eficiencia |
| MDR-40-5 | 5V, 0-6.0A | ± 2% | 80mvp-p | 78% |
| NDR-40-12 | 12V, 0-3.3A | ± 1% | 120mvp-p | 86% |
| MDR-40-15 | 15V, 0-2.66A | ± 1% | 120mvp-p | 88% |
| MDR-40-24 | 24V, 0-1.7A | ± 1% | 200mvp-p | 88% |
| 1. Universal AC input/ Full range | ||||
| 2. Installed on DIN rail TS35/ 7.5 OR 15 | ||||
| 3. Protection: short circuit/ over-load/ over-voltage | ||||
| 4. No load power consumption <0.75W | ||||
| 5. LED indicator for power on | ||||
| 6. DC OK signal output (20W) | ||||
| 7. DC OK relay contact (40W&60W) | ||||
| 8. Cooling by free air condition | ||||
| 9. 100% full load burn-in | ||||
| 10. 2 years warranty | ||||
| Specification: | ||||
| 1. AC input voltage range: 85-264VAC; 120-370VDC | ||||
| 2. AC input current: cold start, 30A at 115VAC, 60A at 230VAC | ||||
| 3. DC adjustment range: 0±20% rated output voltage | ||||
| 4. Over-load protection: 105-150% constant current limiting, auto-recovery | ||||
| 5. Over-voltage protection: 125%-150% rated output voltage | ||||
| 6. Setup, rise, hold up time: 500ms,30ms,50ms AT FULL LOAD AND 230VAC | ||||
| 7. Withstand voltage: I/P-O/P:3KVAC, I/P-FG: 1.5KVAC, 1minute | ||||
| 8. Working temperature: -20-60°C@100%, 70°C@50% load | ||||
| 9. DC OK signal: relay contact | ||||
| 10. EMC standards: EN55022 class B, EN61000-3-2,-3, EN50204, EN61000-4-2,3,4,5,6,8,11, EN61204-3, (EN61000-6-2 heavy industry level also for 40W&60W) | ||||
| 11. Connection: I/P: 3 poles, O/P: 3poles screw DIN terminal | ||||
| 12. Dimension (L*W*H): 40*90*100 mm | ||||
| Please Note: | ||||
| 1. The testing condition for the parameter above is: 230VAC input, rated load, 25°C 70%Rh, Humidity. | ||||
| 2. Error, include the setting error, line stability and load stability. | ||||
| 3. Wave test: adopting “A12” double wire for 20MHZ, and 0.1uF&uF capacitor short-circuit for interrupting. | ||||
| 4. Inlet Voltage Stability test: when is over load, the lowest voltage of inler is representative to the highest voltage. | ||||
| 5. Load stability test: the load is from 0% to 100%, others 60%. | ||||
| 6. Total stability test: the load is from 0% to 100%, others 60%. | ||||
| 7. C2, 3, 6 must be knocked down. | ||||
WEHO 40W single output DIN Rail switching power supply
MDR-40 is a slim line DIN rail Class I switching power supply.
Diseñado con una carcasa de plástico completamente aislada para evitar el contacto del usuario y el riesgo de descarga eléctrica. Con una eficiencia de hasta 88%, esta serie se puede enfriar usando solo convección de aire libre hasta 60 °C, lo que aumenta significativamente la confiabilidad y la vida útil de la fuente de alimentación. Otras características estándar incluyen su bajo consumo de energía sin carga, para ahorrar energía, protecciones contra cortocircuitos, sobrecargas y sobrevoltaje, y contacto de relé DC OK con indicador LED para monitorear el estado de la fuente de alimentación.preguntas, no dude en contactarnos al correo electrónico: [email protected]
- Descripción
we make transformers and power inductors by pure coppers all by ourselves,
Weho almacena 150.000 juegos de modelos de uso común, lo que garantiza una entrega rápida.
We are a power supply manufacturer with 12 years of experience.
Global wide input volatge range 100V to 264V AC
Este producto tiene un pedido mínimo de 100 piezas y se puede personalizar con etiquetas.
This product is small and easy to install, which is space and cost-efficient.
The product can be cooled by convection of natural air.
Save space and cost
PRODUCTOS RELACIONADOS
¿Cuáles son los mejores productos de fuentes de alimentación para su empresa?
Impulsa tu negocio con productos de suministro de energía de calidad WEHO.
Pregúntale a un experto
