SP-15000 Single Output Power Supply With PFC

SP-15000 is a 15KW single output chassis type AC to DC power supply. The entire series input voltage range is 95-265VAC, and can provide DC output for most industrial needs.
Each chassis can be air-cooled through an internal speed-controlled fan, and the operating temperature is close to 60°C.Built-in multiple functions such as output voltage,Current adjustable, current sharing, remote on/off control, 485 communication control, auxiliary power supply and other functions provide a variety of flexible designs.If you have any questions, please do not hesitate to contact us atEmail: [email protected]

Demander un devis

Description

Caractéristiques

1. Plage d'entrée de tension : 95-265VAC
2. Type de Protection: court-circuit/surintensité/surtension/surchauffe
3、Facteur de puissance PF≧0,99
4. Efficacité de travail jusqu'à 93%
5、485Contrôle des communications

Paramètres techniques

Modèle		SP-15000-24	SP-15000-36	SP-15000-48	SP-15000-60	SP-15000-110	SP-15000-220
OUTPUT	Tension continue	24V	36V	48V	60V	110V	220V
	Courant nominal	625A	416A	312A	250A	136A	68A
	Current range	0 – 625A	0 – 416A	0 – 312A	0 – 250A	0 – 136A	0 – 68A
	Rated power	15000W
	Ripple & Roise	500mV	500mV	600mV	600mV	1000mV	1500mV
	Constant current range	12 – 24 V	18 – 36 V	24 – 48 V	30 – 60 V	55 – 110V	110 – 220V
	Tolérance de tension	±1,0%
	Line regulation	±1,0%
	Load regulation	±1,0%
	Setup risetime	1500mS ，700mS/ 230VAC( Full load）
INPUT	Plage de tension	95- 190 VAC(output current 50%) , 195- 265 VAC(output current 10 0%)
	Gamme de fréquence	45Hz – 65Hz
	Facteur de puissance	PF≧0 .99/ 230VAC( Full load)
	Efficiency( MAX)	90 %	91.5 %	92 %	92 %	92.5 %	93 %
	Courant alternatif	＜110A
	Leakage current	＜3 .0mA / 240VAC
PROTECTION	Short curcuit	Enter the constant current and the voltage is less than 10% of the rated voltage, turn off and lock the output after 1 second, and resume after restart
	Over current	The user can set a delay of 5 seconds after the current value is turned off, and the output can be restored after restart
	Over voltage	The user can set the overvoltage value to turn off the output voltage, and resume after restart
	Surchauffe	Turn off the output and automatically recover or restart after the temperature drops
FUNCTION	Réglage de la tension de sortie	0 – 26.4V	0 – 39,6 V	0 – 52.8V	0 – 66 V	0 – 121V	0 – 242 V
	Réglage du courant constant de sortie	0 – 740A	0 – 500A	0 – 375A	0 – 300A	0 – 163.6A	0 – 81,8A
	485 communication	MODBUS Communication protocol
	Isolating auxiliary power supply	12V 0.5A ( Need to be customized)
	Output remote control switch	Default power on, high power off（5V-12V） ( Need to be customized)
	Alarm output	Power normal signal ( Dry contact ≦ 36 V , 0 . 1A )( Need to be customized)
ENVIRONMENT	Working TEMP.	-20 – +60 ℃
	Working humidity	-20 – 90% RHnon-condensing
	Storage TEMP. and humidity	-40 – +85℃, 10 – 95% RH non-condensing
	Vibration	10 – 500Hz, 2G 10mins/T, X 、Y 、Zaxis 60 minutes each
SAFETY& EMC	Résistance d'isolement	Input-output: 100 Mhms/500 VDC/ 25 ℃/70% RH
SAFETY& EMC	Tension avec	I/ P-O/ P : 2KVAC I/ P- FG:2KVAC O/ P- FG:0 . 5KVAC
OTHERS	Dimension	455 345 251mm（LW H）
OTHERS	Poids net	22 KG
Remarque	1、All parameters NOT specially mentioned are measured at 230 VAC input, rated load and 25 ℃ of ambient temperature. 2、Ripple &noise are measured at 20 MHz of bandwidth by using a 12 ” twisted pair-wire terminated with a 0 . 1uf &47uf parallel capacitor. 3、Tolerance: includes set up tolerance, line regulation and load regulation. 4、If the input voltage is low, the output needs to be derated. For details, see the static characteristic diagram. 5、Length of setup time is measured at cold first start,Turning ON/OFF the power supply may lead to increase of the setup time.