SP-15000 Single Output Power Supply With PFC

SP-15000 is a 15KW single output chassis type AC to DC power supply. The entire series input voltage range is 95-265VAC, and can provide DC output for most industrial needs.
Each chassis can be air-cooled through an internal speed-controlled fan, and the operating temperature is close to 60°C.Built-in multiple functions such as output voltage,Current adjustable, current sharing, remote on/off control, 485 communication control, auxiliary power supply and other functions provide a variety of flexible designs.If you have any questions, please do not hesitate to contact us atEmail: [email protected]

Запросить цитату

Описание

Функции

1、Voltage input range: 95-265VAC
2、Protection type: short circuit/overcurrent/overvoltage/overtemperature
3、Power factor PF≧0.99
4、Working efficiency up to 93%
5、485 communication control

Technical Parameters

Модель		SP-15000-24	SP-15000-36	SP-15000-48	SP-15000-60	SP-15000-110	SP-15000-220
OUTPUT	DC voltage	24В	36В	48В	60V	110 В	220В
	Рейтинг тока	625A	416A	312A	250A	136A	68A
	Current range	0 – 625A	0 – 416A	0 – 312A	0 – 250A	0 – 136A	0 – 68A
	Rated power	15000W
	Ripple & Roise	500мВ	500мВ	600мВ	600мВ	1000 мВ	1500mV
	Диапазон постоянного тока	12 – 24V	18 – 36V	24 – 48V	30 – 60V	55 – 110V	110 – 220V
	Допуск по напряжению	±1,0%
	Line regulation	±1,0%
	Регулирование нагрузки	±1,0%
	Setup risetime	1500mS ，700mS/ 230VAC( Full load）
INPUT	Диапазон напряжения	95- 190 VAC(output current 50%) , 195- 265 VAC(output current 10 0%)
	Диапазон частот	45Hz – 65Hz
	Коэффициент мощности	PF≧0 .99/ 230VAC( Full load)
	Efficiency( MAX)	90 %	91.5 %	92 %	92 %	92.5 %	93 %
	переменный ток	＜110A
	Ток утечки	＜3 .0mA / 240VAC
PROTECTION	Short curcuit	Enter the constant current and the voltage is less than 10% of the rated voltage, turn off and lock the output after 1 second, and resume after restart
	Over current	The user can set a delay of 5 seconds after the current value is turned off, and the output can be restored after restart
	Перенапряжение	The user can set the overvoltage value to turn off the output voltage, and resume after restart
	Перегрев	Turn off the output and automatically recover or restart after the temperature drops
FUNCTION	Output voltage adjustment	0 – 26.4V	0 – 39.6V	0 – 52.8V	0 – 66V	0 – 121V	0 – 242V
	Output constant current adjustment	0 – 740A	0 – 500A	0 – 375A	0 – 300A	0 – 163.6A	0 – 81.8A
	485 communication	MODBUS Communication protocol
	Isolating auxiliary power supply	12V 0.5A ( Need to be customized)
	Output remote control switch	Default power on, high power off（5V-12V） ( Need to be customized)
	Alarm output	Power normal signal ( Dry contact ≦ 36 V , 0 . 1A )( Need to be customized)
ENVIRONMENT	Working TEMP.	-20 – +60℃
	Рабочая влажность	-20 – 90% RHnon-condensing
	Storage TEMP. and humidity	-40 – +85℃, 10 – 95% RH non-condensing
	Вибрация	10 – 500Hz, 2G 10mins/T, X 、Y 、Zaxis 60 minutes each
SAFETY& EMC	Сопротивление изоляции	Input-output: 100 Mhms/500 VDC/ 25 ℃/70% RH
SAFETY& EMC	Выдерживая напряжение	I/ P-O/ P : 2KVAC I/ P- FG:2KVAC O/ P- FG:0 . 5KVAC
OTHERS	Измерение	455 345 251mm（LW H）
OTHERS	Net weight	22 KG
Примечание	1、All parameters NOT specially mentioned are measured at 230 VAC input, rated load and 25 ℃ of ambient temperature. 2、Ripple &noise are measured at 20 MHz of bandwidth by using a 12 ” twisted pair-wire terminated with a 0 . 1uf &47uf parallel capacitor. 3、Tolerance: includes set up tolerance, line regulation and load regulation. 4、If the input voltage is low, the output needs to be derated. For details, see the static characteristic diagram. 5、Length of setup time is measured at cold first start,Turning ON/OFF the power supply may lead to increase of the setup time.