| विनिर्देश | S-400-5 | S-400-12 | S-400-24 | S-400-48 |
| डीसी आउटपुट वोल्टेज, करंट | 5V0～60A | 12V0～33A | 24V 0～16.5A | 48V 0～8.3A |
| लहर और शोर | 100mVp-पी | 150mVp-पी | 150mVp-पी | 200mVp-पी |
| इनलेट तार स्थिरता | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| लोड स्थिरता | ±1% | ±0.5% | ±0.5% | ±0.5% |
| क्षमता | 0.73 | 0.82 | 0.83 | 0.85 |
| डीसी वोल्टेज के लिए समायोज्य रेंज | ±10% | ±10% | ±10% | ±10% |
| इनपुट वोल्टेज रेंज | 90～132VAC/180～264VAC by switch 254～370VDC 47~63Hz | |||
| प्रभाव धारा | कोल्ड स्टार्ट करंट 25A/115VAC 50A/230VAC | |||
| अधिभार संरक्षण | 105%～135%cut off the output,automatic recovery | |||
| ओवर वोल्टेज संरक्षण | 115%～150%shut down O/P voltage,re-power on to recover | |||
| सेटअप, उदय, होल्ड अपटाइम | 200ms,50ms,20ms/230VAC at full load | |||
| वोल्टेज का सामना करें | आई/पी-ओ/पी:1.5केवी आई/पी-एफजी:1.5केवी ओ/पी-एफजी:0.5केवी 1 मिनट | |||
| अलगाव प्रतिरोध | I/P-O/P I/P-FG O/P-FG:500VDC/100MΩ | |||
| कार्य तापमान | -10℃~+50℃ | |||
| आयाम | 215×115×50mm | |||
| वज़न | 1.1kg | |||
| पैकिंग | 45.5×31.5×26CM/20PCS/22kg | |||
S-400W series normal single switching power supply
WeHo professional 400W Switching CNC Power Supply can be widely used in Industrial Automation and CNC Stepper/Servo Systems.
स्विच द्वारा चयन योग्य 115/230V एसी रेंज, अंतर्निर्मित पंखे द्वारा एयर कूलिंग। फिल्टर कैपेसिटेंस; उच्च वोल्टेज का सामना करना; कम अपव्यय; बड़ी क्षमता। औद्योगिक स्वचालन, एलईडी डिस्प्ले, इलेक्ट्रॉनिक उपकरण, संचार इत्यादि में व्यापक रूप से उपयोग किया जा रहा है। यदि आपके कोई प्रश्न हैं, तो कृपया हमसे संपर्क करने में संकोच न करें। ईमेल: [email protected]
- विवरण
The white cap on the connector is for safety precautions against electric shock and dust protection.
All products go through standardized testing procedures during production.
Input voltage of this product: 90-132/180-264VAC, changed by the switch.
This product with built-in comprehensive over/under voltage, over current, overload, overhead, over temperature, and short circuit protection functions.
उत्पाद को प्राकृतिक वायु के संवहन द्वारा ठंडा किया जा सकता है।.
The product’s output ripple noise is 100MV.
Product voltage adjustment: ±10%
उत्पाद ने 100% पूर्ण लोड एजिंग परीक्षण पूरा कर लिया है।.
Product size: 215*115*50mm (L * W * H)
पूछे जाने वाले प्रश्न
Q1: How do I determine whether a 400W switching power supply is sufficient for my equipment?
Calculate the maximum power consumption of all connected devices and compare it with the power supply’s rated capacity. The total continuous load should stay below 400W, while additional headroom should be reserved for startup current, temporary load increases, and high-temperature operation.
Q2: What applications can use the S-400W switching power supply?
The S-400W series is suitable for industrial automation, machinery, control systems, LED equipment, communication devices, electronic equipment, and other systems that require a stable single DC output.
Q3: How much power headroom should I leave when using a 400W power supply?
The correct power margin depends on the application, but continuously operating at the absolute maximum rating is generally not recommended. Equipment with motors, relays, capacitive loads, or other high-startup-current components may require more headroom.
Q4: What are the advantages of a 400W switch mode power supply?
A 400W switching power supply provides good power density, high efficiency, compact size, and lower heat loss compared with many linear power supplies. These characteristics make it practical for industrial equipment and control systems with limited installation space.
Q5: How do I choose the correct output voltage for the S-400W series?
The output voltage must match the rated DC input voltage of the connected equipment. Before ordering, check the equipment specification, maximum current requirement, wiring distance, and total power demand. Using the wrong voltage can damage the connected load.
संबंधित उत्पाद
आपके व्यवसाय के लिए सर्वोत्तम विद्युत आपूर्ति उत्पाद कौन से हैं?
WEHO गुणवत्ता वाले बिजली आपूर्ति उत्पादों के साथ अपने व्यवसाय को बढ़ावा दें।.
किसी विशेषज्ञ से पूछें