| Model | LPV-60-5E | LPV-60-12E | LPV-60-15E | LPV-60-24E | LPV-60-36E | LPV-60-48E | |
| Output | DC Voltage | 5V | 12V | 15V | 24V | 36V | 48V |
| Rated Current | 8A | 5A | 4A | 2.5A | 1.67A | 1.25A | |
| Current Range | 0 ~ 8A | 0 ~ 5A | 0 ~ 4A | 0 ~ 2.5A | 0 ~ 1.67A | 0 ~ 1.25A | |
| Rated Power | 40W | 60W | 60W | 60W | 60W | 60W | |
| Ripple & Noise (max.) | 80mVp-p | 120mVp-p | 120mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | |
| Voltage Tolerance | ±8.0% | ±5.0% | |||||
| Line Regulation | ±1.0% | ||||||
| Load Regulation | ±6.0% | ±2.0% | |||||
| Setup, Rise Time | 500ms, 20ms/230VAC; 500ms, 20ms/115VAC at full load(for 5-36V); 500ms, 30ms/230VAC; 500ms, 30ms/115VAC at full load (for 48V) |
||||||
| Hold UP Time (Typ.) | 50ms/230VAC 16ms/115VAC at full load |
||||||
| Input | Voltage Range | 90 ~ 264VAC 127 ~ 370VDC |
|||||
| Frequency Range | 47 ~ 63Hz | ||||||
| Efficiency (Typ.) | 78% | 83% | 83% | 86% | 86% | 86% | |
| AC Current (Typ.) | 1.2A/115VAC 1A/230VAC | ||||||
| Inrush Current (Typ.) | Cold Start 60A(twidth=525μs measured at 50% Ipeak) at 230VAC | ||||||
| MAX. No. of PSUs on 16A | 3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC | ||||||
| Circuit Breaker | |||||||
| LEAKAGE CURRENT | 0.25mA / 240VAC | ||||||
| Protection | Over-load | 110 ~ 150% rated output power | |||||
| Protection type: Hiccup mode, recovers automatically after fault condition is removed | |||||||
| Over Voltage | 5.75 ~ 6.75V | 13.8 ~ 16.2V | 17.25 ~ 20.25V | 27.6 ~ 32.4V | 41.4 ~ 48.6V | 55.2 ~ 64.8V | |
| Protection type: Shut down o/p voltage, re-power on to recover | |||||||
| Environment | Working Temp | -30 ~ +70℃(Refer to “Derating Curve”) | |||||
| Working Humidity | 20 ~ 90%RH non-condensing | ||||||
| Storage Temp, Humidity | -40 ~ +80℃, 10 ~ 95%RH | ||||||
| Temp Coefficient | ±0.03%/℃ (0 ~ 50℃) | ||||||
| Vibration | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along the X, Y, and Z axes | ||||||
| Safety & EMC | Safety Standards | IP67 approved; design refer to EN60950-1 | |||||
| Withstand Voltage | I/P-O/P: 1.5KVAC | ||||||
| Isolation Resistance | I/P-O/P: >100M Ohms / 500VDC / 25℃/ 70% RH | ||||||
| EMC Emission | Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A, EN61000-3-3 | ||||||
| EMC Immunity | Compliance to EN55024, light industry level, criteria A | ||||||
| OTHERS | MTBF | 732Khrs min. MIL-HDBK-217F (25℃) | |||||
| आयाम | 162.5*42.5*32mm (L*W*H) | ||||||
| पैकिंग | 0.4Kg; 32pcs/13.8Kg/0.56CUFT | ||||||
Waterproof IP67 plastic LED driver AC 110v/220v to constant DC output 60W power supply
LPV-60E power supply series is a fantastic AC-to-DC converter for delivering constant voltage in wet and dusty environments.
It comes from LPV Series Plastic Waterproof Power Supply Series which operates off-line voltage (90-264VAC) and delivers constant voltages from 5-48VDC depending on your selection.The 20 to 60 Watt models qualify as Class 2 power units offered in a slim, butter stick design.यदि आपके कोई प्रश्न हैं, तो कृपया हमसे संपर्क करने में संकोच न करें ईमेल: [email protected]
- विवरण
The product has perfect protection function and 5G shock resistance.
Our products have a long lifespan, are highly reliable, and are very efficient.
This product is ideal for a wide variety of LED lighting and equipment.
This product has a full range of input voltage 85-264VAC.
The product adopts a fully isolated plastic shell.
संबंधित उत्पाद
आपके व्यवसाय के लिए सर्वोत्तम विद्युत आपूर्ति उत्पाद कौन से हैं?
WEHO गुणवत्ता वाले बिजली आपूर्ति उत्पादों के साथ अपने व्यवसाय को बढ़ावा दें।.
किसी विशेषज्ञ से पूछें