Voltan malar 800w 48V 17A DC 48 volt bekalan kuasa pensuisan

WeHo professional 800W Switching SCN series Power Supply can be widely used in Industrial Automation and CNC Stepper/Servo Systems.
Julat AC 115/230V boleh dipilih oleh suis, penyejukan udara oleh kipas terbina dalam. Kapasiti penapis; Voltan tahan tinggi; Pelesapan rendah; Kapasiti besar. Digunakan secara meluas dalam automasi Perindustrian, paparan LED, peralatan elektronik, komunikasi, dan lain-lain. Jika anda mempunyai sebarang pertanyaan, sila jangan teragak-agak untuk menghubungi kami di E -mel: [email protected]

Muat turun Minta sebut harga

Penerangan

Spesifikasi & Model

Model		SCN-800-12	SCN-800-15	SCN-800-24	SCN-800-48
Output	Voltan DC	12v	15v	24V	48v
	Toleransi voltan	± 1%	± 1%	± 1%	± 1%
	Arus dinilai	66A	54A	33a	16.6A
	Julat Semasa	0-66A	0-54A	0-33A	0-16.6A
	Kuasa dinilai	800W	800W	800W	800W
	Riak & Kebisingan	150mvp-p	150mvp-p	240mVp-p	480mVp-p
	DC Adjustment Range	±5%; Can adjust from 40%~100% output voltage by external control 2-5V
	Persediaan, Bangkit, Tahan Masa	800ms, 50ms, 16ms at full load
Input	Julat voltan	90~130VAC / 180~260 VAC47~63 Hz; selected by switch260~370VDC
	AC Current	13A/115 VAC 8.0A/ 230 VAC
	Kecekapan	80%	81%	85%	87%
	Arus Masuk	60A/230V
	Arus kebocoran	3.5 mA/240VAC
Perlindungan	Lebih Beban	110%~135%
		Protection: Protection: Current limiting, delay shut down o/p voltage, re-power on to recover
	Lebih dari voltan	110%~135%
		Jenis Perlindungan: Tutup voltan O/P, kuasa semula untuk pulih
	Over-Temp	TSW1(Power transistor) When temp. >100 °C, shut down o/p voltage, re-power on to recover
Persekitaran	Working Temp. Humidity	-10°C ~ +65°C, 20%~90%RH
	Suhu Penyimpanan. Kelembapan	-20°C ~ +85°C, 10%~95%RH
	Getaran	10~200Hz, 2G 10min./1cycle, the period for 60min, each along X, Y, and Z axes
Keselamatan	Menahan voltan	I/P-O/P, I/P-FG: 1500VAC
	Rintangan pengasingan	I/P-O/P, I/P-FG, >100M Ohms / 500VDC
Standard	Standard Keselamatan	Design refer to UL1950,CSA22.2,IEC60950
	Standard EMC	Design refers to FCC Part 15 Class A
Yang lain	Berat	2.3Kg;
	Pembungkusan	6pcs/ ctn
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load, and 25°C of ambient temperature.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor.
	3. Tolerance: includes set up tolerance, line regulation, and load regulation.
	4. The power supply is considered a component that will be installed into the final equipment. The final equipment must be re-confirmed that it still meets EMC directives.