S-1500W series normal single switching power supply

WeHo professional 1500W Switching CNC Power Supply can be widely used in Industrial Automation and CNC Stepper/Servo Systems.
115/230V AC range selectable by the switch, air cooling by the built-in fan.Filter capacitance; High withstand voltage; Low dissipation; Large capacity.Widely being used in Industrial automation, LED display, electronic equipment, communications, etc.If you have any questions, please do not hesitate to contact us at E -mel: [email protected]

Muat turun Minta sebut harga

Penerangan

Spesifikasi & Model

Spesifikasi	S-1500-12	S-1500-24	S-1500-36	S-1500-48
Voltan output DC, arus	12V 0～125A	24V 0～62.5A	36V 0～41A	48V 0～32A
Gelombang dan bunyi bising	150mvp-p	180mVp-P	180mVp-P	240MVP-P
Kestabilan dawai masuk	± 0.5%	± 0.5%	± 0.5%	± 0.5%
Memuatkan kestabilan	± 0.5%	± 0.5%	± 0.5%	± 0.5%
Kecekapan	0.8	0.81	0.83	0.84
Julat laras untuk voltan dc	± 10%	± 10%	± 10%	± 10%
Julat voltan input	100~132VAC/200~264VAC by switch 254～370VDC 47～63Hz
Kesan semasa	Cold Start Current 45A/230VAC
Perlindungan beban	105%～135%cut off the output,automatic recovery
Perlindungan lain	Over current protection /Short-circuit protection
Persediaan, bangkit, tahan uptime	2000ms,50ms,20ms/230VAC at full load
Menahan voltan	I/P-O/P: 1.5kV I/P-FG: 1.5kV O/P-FG: 0.5kV 1minute
Rintangan pengasingan	I/P-O/P I/P-FG O/P-FG:500VDC/100MΩ
Suhu kerja	-10 ℃ ~+50 ℃
Dimensi	291×132×68mm
Berat	2.65kg
Pembungkusan	37.5×31×25.5CM/6PCS/16kg