S-400W series normal single switching power supply

WeHo professional 400W Switching CNC Power Supply can be widely used in Industrial Automation and CNC Stepper/Servo Systems.
115/230V AC range selectable by the switch, air cooling by the built-in fan.Filter capacitance; High withstand voltage; Low dissipation; Large capacity.Widely being used in Industrial automation, LED display, electronic equipment, communications, etc.If you have any questions, please do not hesitate to contact us at E -mel: [email protected]

Muat turun Minta sebut harga

Penerangan

Spesifikasi & Model

Spesifikasi	S-400-5	S-400-12	S-400-24	S-400-48
Voltan output DC, arus	5V0～60A	12V0～33A	24V 0～16.5A	48V 0～8.3A
Gelombang dan bunyi bising	100mVp-P	150mvp-p	150mvp-p	200mvp-p
Kestabilan dawai masuk	± 0.5%	± 0.5%	± 0.5%	± 0.5%
Memuatkan kestabilan	± 1%	± 0.5%	± 0.5%	± 0.5%
Kecekapan	0.73	0.82	0.83	0.85
Julat laras untuk voltan dc	± 10%	± 10%	± 10%	± 10%
Julat voltan input	90～132VAC/180～264VAC by switch 254～370VDC 47~63Hz
Kesan semasa	Cold start current 25A/115VAC 50A/230VAC
Perlindungan beban	105%～135%cut off the output,automatic recovery
Over voltage protection	115%～150%shut down O/P voltage,re-power on to recover
Persediaan, bangkit, tahan uptime	200ms,50ms,20ms/230VAC at full load
Menahan voltan	I/P-O/P: 1.5kV I/P-FG: 1.5kV O/P-FG: 0.5kV 1minute
Rintangan pengasingan	I/P-O/P I/P-FG O/P-FG:500VDC/100MΩ
Suhu kerja	-10 ℃ ~+50 ℃
Dimensi	215×115×50mm
Berat	1.1kg
Pembungkusan	45.5×31.5×26CM/20PCS/22kg