| Spesifikasi | S-800-12 | S-800-24 | S-800-36 | S-800-48 |
| Voltan output DC, arus | 12V 0~66A | 24V 0~33A | 36V 0~22A | 48V 0~17A |
| Gelombang dan bunyi bising | 150mvp-p | 180mVp-P | 180mVp-P | 240MVP-P |
| Kestabilan dawai masuk | ± 0.5% | ± 0.5% | ± 0.5% | ± 0.5% |
| Memuatkan kestabilan | ± 0.5% | ± 0.5% | ± 0.5% | ± 0.5% |
| Kecekapan | 0.8 | 0.85 | 0.85 | 0.87 |
| Julat laras untuk voltan dc | ± 10% | ± 10% | ± 10% | ± 10% |
| Julat voltan input | 100~132VAC/200~264VAC by switch 254~370VDC 47~63Hz | |||
| Kesan semasa | Cold Start Current 45A/230VAC | |||
| Perlindungan beban | 105%~135%cut off the output,automatic recovery | |||
| Perlindungan lain | Over current protection/Short-circuit protection | |||
| Persediaan, bangkit, tahan uptime | 2000ms,50ms,20ms/230VAC at full load | |||
| Menahan voltan | I/P-O/P: 1.5kV I/P-FG: 1.5kV O/P-FG: 0.5kV 1minute | |||
| Rintangan pengasingan | I/P-O/P I/P-FG O/P-FG:500VDC/100MΩ | |||
| Suhu kerja | -10 ℃ ~+50 ℃ | |||
| Dimensi | 291×132×68mm | |||
| Berat | 2.65kg | |||
| Pembungkusan | 37.5×31×25.5CM/6PCS/16kg | |||
S-800W series normal single switching power supply
WeHo professional 800W Switching CNC Power Supply can be widely used in Industrial Automation and CNC Stepper/Servo Systems.
115V and 230V can be chosen by the switch.Powerful functions(eg. PWM control) and professional designs (Built-in big fan for cooling) ensure high efficiency and high reliability of the power supply.Low cost also makes it more acceptable for general usage.If you have any questions, please do not hesitate to contact us at E -mel: [email protected]
- Penerangan
This product has an integrated design that minimizes temperature rise and calorific value.
Weho stocks 200,000 sets of commonly used models, ensuring quick delivery.
The product is highly stable, the workmanship is steady, the output voltage is consistent, and there is no drift.
Produk ini mempunyai kuantiti pesanan minimum 100 keping dan boleh disesuaikan dengan label.
This product has Automatic Recovery short-circuit protection.
This product is both low-cost and reliable.
This product is covered by a 24-month warranty.
Product size: 291*132*68mm (L * W * H)
U.S. Switching Power Supply Manufacturers
By reducing the operating current and junction temperature, the stress of the device can be reduced and the reliability of the product can be greatly improved.
Modularization is the general trend in the development of switching power supply.
Distributed power supply systems can be composed of a modular power supply, N+1 redundant power supply system can be designed, and the capacity expansion of parallel mode can be realized.
In view of the disadvantage of high operating noise of switching power supply, if high frequency is pursued alone, its noise will also increase.
The partial resonance conversion circuit technology can theoretically achieve high frequency and reduce noise.
However, there are still technical problems in the practical application of partial resonance conversion technology, so a lot of work still needs to be done in this field to make many technologies practical.
Apakah produk bekalan kuasa terbaik untuk perniagaan anda?
Meningkatkan perniagaan anda dengan produk bekalan kuasa berkualiti WEHO.
Tanya pakar


