...

Wodoodporny plastikowy sterownik LED IP67 AC 110 V/220 V do stałego wyjścia DC Zasilacz 10 W

Discontinued series - historical reference only. Production of the LPV and LPVE series has stopped. This page and its technical documents are retained for historical reference.

Ask our team to review your application and help select an XLG or HLG model. Suitability must be confirmed for your specific requirements; no automatic or universal replacement is implied.

LPV-10E power supply series is a fantastic AC-to-DC converter for delivering constant voltage in wet and dusty environments.
It comes from LPV Series Plastic Waterproof Power Supply  Series which operates off-line voltage (90-264VAC) and delivers constant voltages from 5-48VDC depending on your selection.The 20 to 60 Watt models qualify as Class 2 power units offered in a slim, butter stick design.Jeśli masz jakiekolwiek pytania, nie wahaj się z nami skontaktować pod adresem E-mail: [email protected]

Model LPV-10-5E LPV-10-12E LPV-10-15E LPV-10-24E
Napięcie wyjściowe prądu stałego 5 V 12 V 15 V 24 V
Znamionowy prąd wyjściowy 2A 1A 0.65A 0,5A
Output Current Rage 0-2A 0-1A 0-65A 0-0.5A
Moc znamionowa 10W 10W 10W 10W
Fala I Hałas 80mVp-p 120mVp-p 120mVp-p 150mVp-p
Tolerancja napięcia ±5% ±5% ±5% ±5%
Line Regulation ±1% ±1% ±1% ±1%
Load Regulation ±2% ±2% ±2% ±2%
Efektywność 71% 81% 83% 83%
AC Input Voltage Range 90 ~ 264VAC 127 ~ 370VDC 47 ~ 63Hz
Prąd wejściowy 0.55A/115VAC
0,35A/230VAC
AC INnrush Current Cold Start 70A(twidth=215μs measured at 50% Ipeak) at 230VAC
Zabezpieczenie przed przeciążeniem Znamionowa moc wyjściowa 110–150%
Over-Voltage Protection 5.75-6.75V 13.8-16V 17.5-21V 28-32V
Protection type: Shut off o/p voltage, clamping by Zener diode
Setup Rise Time 500 ms, 20 ms / 230 V AC
500ms, 20ms / 115VAC
przy pełnym obciążeniu
 Hold Up Time 50ms/230VAC
16ms/115VAC
przy pełnym obciążeniu
Wytrzymać napięcie I/P-O/P: 1,5 kVAC
Rezystancja izolacji I/P-O/P: >100M omów / 500VDC / 25°C/ 70% RH
Temperatura pracy -30°C ~ +70°C
Overall Dimension 118*35*26mm (L*W*H)
Standardy bezpieczeństwa EN60950-1, IP67 approved
EMC Standards compliance to EN55024, light industry level, criteria A
Waga 0.22Kgs

This product is suitable for LED-related lamps or appliances.

This product has a full range of input voltage 85-264VAC.

Produkt przeszedł test starzenia przy pełnym obciążeniu 100%.

This product is fully encapsulated to IP67.

Ten rozmiar produktu jest mały i kompaktowy.

Często zadawane pytania

Q1. How does the LPVE plastic series differ from the aluminum LPV series?
The LPVE series uses a plastic ultra-thin housing and covers 10W to 100W, while the LPV series covers 15W to 250W. The slim LPVE form factor suits tight spaces.

Q2. What is the main benefit of a plastic IP67 housing?
Plastic housing reduces weight and cost and avoids metal-case grounding concerns in some designs. The IP67 sealing still provides dust-tight and water-immersion protection.

Q3. Is the LPVE-10 suitable for small lighting installations?
The 10W rating fits compact fixtures, small signage modules, accent lighting and low-power LED strips. Larger runs call for higher-wattage models in the same series.

Q4. What mains voltage compatibility is listed?
The series accepts 90–264VAC or 127–370VDC, which covers 110V and 220V markets with a single model.

Q5. What other LPVE capacities are available for project scaling?
LPVE-20, LPVE-40, LPVE-60 and LPVE-100 are listed, so one housing style can be used throughout a multi-zone project.

Need help selecting an XLG or HLG model?

Ask our team to review your application and discuss XLG or HLG options. Model suitability requires individual confirmation.

Zapytaj eksperta
Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.