Facebook-f X-twitter Linkedin-in Instagrama
Zapytanie teraz

Bloga

imageye imgi 6 wystrój

24V Power Supply Selection for Servo-Motor Brake and Control Circuits

Evaluate the WEHO S-150-24 for a 24V servo-brake and control bus using a 5.30A worked load map, selector, voltage-drop, thermal,
Czytaj więcej >>

EDR-150-24 for a 230VAC Cold-Storage Door Control Panel: A Practical 24V Load Map

Map a 6.0A cold-storage door control load and check EDR-150-24 capacity at 230VAC, including input rating, peaks, derating, wiring, and
Czytaj więcej >>

24V Waterproof LED Driver Sizing for Architectural Facade Lighting: HLG-150-24

Size a 24V commercial facade-lighting load for HLG-150-24, including 120W worked example, cable drop, IP67 installation details, and exact mechanical
Czytaj więcej >>

Battery-Backed Access Control Power: PSC-150-12 Load and Charge Budget

Assess PSC-150-12 for 13.8V access-control loads and battery charging, with 7.5A main, 3A charge, 150W aggregate, and 159 x 97
Czytaj więcej >>

48V to 5V DC-DC Converter Selection for Telecom, IoT, and Control Modules

48v to 5v converter selection guide for source range, output current, wiring, protection, derating, heat, and WEHO model confirmation.
Czytaj więcej >>

12V to 13.8V DC-DC Converter Selection for Radio and Communication Equipment

12v to 13.8v converter selection guide for source range, output current, wiring, protection, derating, heat, and WEHO model confirmation.
Czytaj więcej >>

12V to 48V DC-DC Converter Selection for Industrial Systems

12v to 48v converter selection guide for source range, output current, wiring, protection, derating, heat, and WEHO model confirmation.
Czytaj więcej >>

Print-and-Apply Labeling System 24V Power: Map Interface, Sensor and Applicator Loads

Map print-engine interface ownership and cycle-state 24V loads before reviewing a control-power supply for a print-and-apply labeling system.
Czytaj więcej >>

24V to 48V DC-DC Converter Selection for Control and Telecom Loads

24v to 48v converter selection guide for source range, output current, wiring, protection, derating, heat, and WEHO model confirmation.
Czytaj więcej >>

How to Test Power-Supply Hold-Up Time Before Specifying a DC UPS

Define Vmin, run a controlled hold-up test, and compare measured ride-through with the required interruption before evaluating a DC UPS.
Czytaj więcej >>

36V to 12V DC-DC Converter Selection for Golf Cart and E-Bike Systems

36v to 12v converter selection guide for source range, output current, wiring, protection, derating, heat, and WEHO model confirmation.
Czytaj więcej >>

Power Supply Derating Guide for Industrial Control Cabinets

power supply derating guide for industrial control cabinets: load percentage, ambient temperature, cabinet airflow, input voltage, altitude, and margin.
Czytaj więcej >>

Bloga