...

Product Categories

Водонепроницаемый пластиковый светодиодный драйвер IP67 переменного тока 110 В/220 В с постоянным выходом постоянного тока 10 Вт

Discontinued series - historical reference only. Production of the LPV and LPVE series has stopped. This page and its technical documents are retained for historical reference.

Ask our team to review your application and help select an XLG or HLG model. Suitability must be confirmed for your specific requirements; no automatic or universal replacement is implied.

LPV-10E power supply series is a fantastic AC-to-DC converter for delivering constant voltage in wet and dusty environments.
It comes from LPV Series Plastic Waterproof Power Supply  Series which operates off-line voltage (90-264VAC) and delivers constant voltages from 5-48VDC depending on your selection.The 20 to 60 Watt models qualify as Class 2 power units offered in a slim, butter stick design.Если у вас есть какие-либо вопросы, пожалуйста, не стесняйтесь обращаться к нам по адресу Электронная почта: [email protected]

Модель LPV-10-5E LPV-10-12E LPV-10-15E LPV-10-24E
Выходное напряжение постоянного тока 5В 12 В 15 В 24В
Номинальный выходной ток 2А 1А 0.65A 0,5 А
Выходной ток 0-2A 0-1A 0-65A 0-0.5A
Номинальная мощность 10W 10W 10W 10W
Волна и шум 80мВпик-пик 120 мВ (пик-пик) 120 мВ (пик-пик) 150 мВ (пик-пик)
Допуск по напряжению ±5% ±5% ±5% ±5%
Line Regulation ±1% ±1% ±1% ±1%
Load Regulation ±2% ±2% ±2% ±2%
Эффективность 71% 81% 83% 83%
Диапазон входного напряжения переменного тока 90 ~ 264VAC 127 ~ 370VDC 47 ~ 63Hz
Входной ток 0.55A/115VAC
0.35A/230VAC
Пусковой ток переменного тока Cold Start 70A(twidth=215μs measured at 50% Ipeak) at 230VAC
Защита от перегрузки 110 ~ 150% rated output power
Защита от перенапряжения 5.75-6.75V 13.8-16V 17.5-21V 28-32V
Protection type: Shut off o/p voltage, clamping by Zener diode
Настройка времени нарастания 500ms, 20ms / 230VAC
500ms, 20ms / 115VAC
at full load
 Hold Up Time 50ms/230VAC
16ms/115VAC
at full load
Выдерживать напряжение I/P-O/P: 1,5 кВА переменного тока
Сопротивление изоляции I/P-O/P: >100M Ohms / 500VDC / 25°C/ 70% RH
Рабочая температура -30°C ~ +70°C
Габаритные размеры 118*35*26mm (L*W*H)
Стандарты безопасности EN60950-1, IP67 approved
Стандарты ЭМС compliance to EN55024, light industry level, criteria A
Масса 0.22Kgs

This product is suitable for LED-related lamps or appliances.

This product has a full range of input voltage 85-264VAC.

Изделие прошло испытание на старение при полной нагрузке 100%.

Этот продукт полностью инкапсулирован по стандарту IP67.

Этот размер продукта небольшой и компактный.

Часто задаваемые вопросы

Q1. How does the LPVE plastic series differ from the aluminum LPV series?
The LPVE series uses a plastic ultra-thin housing and covers 10W to 100W, while the LPV series covers 15W to 250W. The slim LPVE form factor suits tight spaces.

Q2. What is the main benefit of a plastic IP67 housing?
Plastic housing reduces weight and cost and avoids metal-case grounding concerns in some designs. The IP67 sealing still provides dust-tight and water-immersion protection.

Q3. Is the LPVE-10 suitable for small lighting installations?
The 10W rating fits compact fixtures, small signage modules, accent lighting and low-power LED strips. Larger runs call for higher-wattage models in the same series.

Q4. What mains voltage compatibility is listed?
The series accepts 90–264VAC or 127–370VDC, which covers 110V and 220V markets with a single model.

Q5. What other LPVE capacities are available for project scaling?
LPVE-20, LPVE-40, LPVE-60 and LPVE-100 are listed, so one housing style can be used throughout a multi-zone project.

Need help selecting an XLG or HLG model?

Ask our team to review your application and discuss XLG or HLG options. Model suitability requires individual confirmation.

Спросите эксперта
Серафинит - АкселераторОптимизировано Серафинит - Акселератор
Включает высокую скорость сайта, чтобы быть привлекательным для людей и поисковых систем.