Output current range
| Модель | MS-35-5 | MS-35-12 | MS-35-24 | |
| Выход | Выходное напряжение постоянного тока | 5В | 12 В | 24В |
| Допуск выходного напряжения | ±1% | ±1% | ±1% | |
| Номинальный выходной ток | 6A | 3.0A | 1.5A | |
| 0~6A | 0~3.0A | 0~1.5A | ||
| Выходная мощность | 25W | 36W | 36W | |
| Пульсация и шум | 80mVp-p | 120 мВ (пик-пик) | 120 мВ (пик-пик) | |
| DC Voltage Adjustable Scope | -9%~+10% | ±10% | ±10% | |
| Начинай, поднимайся, держи время | 800ms,20ms,24ms/230VAC. | |||
| Вход | Диапазон входного напряжения | 170~264VAC 47~63Hz,235~373VDC | ||
| Обменный входной ток | 0.45A/230VAC | |||
| Эффективность | 77% | 81% | 84% | |
| Импульсный ток | Ток холодного пуска 30 А/230 В переменного тока | |||
| Ток утечки | <1 мА/240 В переменного тока | |||
| Protection characteristics | Защита от перегрузки | Protection way: fold layer type load current limiting, abnormal conditions can be removed recovery | ||
| environment | Working Temperature, Humidity | -10℃~+60℃;20%~90%RH(Please refer to reduce the specified number load curve ) | ||
| Поддерживайте температуру, влажность | -20℃~+85℃;10%~95%RH No condensation | |||
| Виброустойчивость | 10~500Hz,2G 10min./ 1 cycle time, 60 minutes, the axis | |||
| security | Компрессионный секс | Вход/выход: вход 1,5 кВ переменного тока и между выходом переменного тока и землей: 1,5:0,5 кВ переменного тока. | ||
| Сопротивление изоляции | Between the input and output, the output and input: with the ground: 100 M / 500 VDC Ohms | |||
| Complies with the standards | Стандарты безопасности | Meet the UL1012 requirements | ||
| EMC Стандарт | Accord with | |||
| EN55022, CLASSA | ||||
| other | Масса | 0.17kg 84*58*38(L*W*H) | ||
| Упаковка | 0.17kg/80pcs/14.5kg/0.9CUFT | |||
| note | 1. All the parameters have not been specified, all are in 230V voltage input, AC-rated load, and 25℃ conditions measuring income value. | |||
| 2. Ripple and noise voltage are in 20MHz bandwidth with 1 to 2 inches oscilloscope twisted pair end and 0.1mu and 47 muons capacitance measurement when. | ||||
| 3. Tolerance is voltage setting error, the voltage adjustment rate, and adjusting the sum total of the current rate. | ||||

