S-1500W series normal na solong switching power supply

WeHo professional 1500W Switching CNC Power Supply can be widely used in Industrial Automation and CNC Stepper/Servo Systems.
115/230V AC range selectable by the switch, air cooling by the built-in fan.Filter capacitance; High withstand voltage; Low dissipation; Large capacity.Widely being used in Industrial automation, LED display, electronic equipment, communications, etc.If you have any questions, please do not hesitate to contact us at Email: [email protected]

I -download Humiling ng isang quote

Paglalarawan

Mga Detalye at Modelo

Pagtutukoy	S-1500-12	S-1500-24	S-1500-36	S-1500-48
DC output boltahe, kasalukuyang	12V 0～125A	24V 0～62.5A	36V 0～41A	48V 0～32A
Kaway at ingay	150mVp-P	180mVp-P	180mVp-P	240mVp-P
Katatagan ng inlet wire	±0.5%	±0.5%	±0.5%	±0.5%
Katatagan ng pag-load	±0.5%	±0.5%	±0.5%	±0.5%
Kahusayan	0.8	0.81	0.83	0.84
Adjustable range para sa DC boltahe	±10%	±10%	±10%	±10%
Saklaw ng boltahe ng input	100~132VAC/200~264VAC by switch 254～370VDC 47～63Hz
Kasalukuyang epekto	Cold start current 45A/230VAC
Proteksyon ng labis na karga	105%～135%cut off the output,automatic recovery
Iba pang proteksyon	Over current protection /Short-circuit protection
Setup, rise, hold uptime	2000ms,50ms,20ms/230VAC at full load
Makatiis ng boltahe	I/P-O/P:1.5kV I/P-FG:1.5kV O/P-FG:0.5kV 1min
paglaban sa paghihiwalay	I/P-O/P I/P-FG O/P-FG:500VDC/100MΩ
Temperatura ng pagtatrabaho	-10℃~+50℃
Dimensyon	291×132×68mm
Timbang	2.65kg
Pag-iimpake	37.5×31×25.5CM/6PCS/16kg