S-1500W series normal single switching power supply

WeHo professional 1500W Switching CNC Power Supply can be widely used in Industrial Automation and CNC Stepper/Servo Systems.
115/230V AC range selectable by the switch, air cooling by the built-in fan.Filter capacitance; High withstand voltage; Low dissipation; Large capacity.Widely being used in Industrial automation, LED display, electronic equipment, communications, etc.If you have any questions, please do not hesitate to contact us at E-posta: [email protected]

İndirmek Teklif isteyin

Tanım

Özellikler ve Model

Spesifikasyon	S-1500-12	S-1500-24	S-1500-36	S-1500-48
DC çıkış voltajı, akım	12V 0～125A	24V 0～62.5A	36V 0～41A	48V 0～32A
Dalga ve gürültü	150mVp-P	180mVp-P	180mVp-P	240mVp-P
Inlet wire stability	±0,5%	±0,5%	±0,5%	±0,5%
Load stability	±0,5%	±0,5%	±0,5%	±0,5%
Yeterlik	0.8	0.81	0.83	0.84
DC voltajı için ayarlanabilir aralık	±10%	±10%	±10%	±10%
Giriş voltajı aralığı	100~132VAC/200~264VAC by switch 254～370VDC 47～63Hz
Darbe akımı	Cold start current 45A/230VAC
Aşırı yük koruması	105%～135%cut off the output,automatic recovery
Other protection	Over current protection /Short-circuit protection
Setup,rise,hold uptime	2000ms,50ms,20ms/230VAC at full load
Voltaja dayanmak	I/P-O/P:1.5kV I/P-FG:1.5kV O/P-FG:0.5kV 1minute
İzolasyon direnci	I/P-O/P I/P-FG O/P-FG:500VDC/100MΩ
Çalışma sıcaklığı	-10℃~+50℃
Boyut	291×132×68mm
Ağırlık	2.65kg
Ambalaj	37.5×31×25.5CM/6PCS/16kg