S-600W-15 series normal single switching power supply

WeHo professional 600W Switching CNC Power Supply can be widely used in Industrial Automation and CNC Stepper/Servo System.
115V and 230V can be chosen by switch.Powerful functions(eg. PWM control) and professional designs (Built-in big fan for cooling) ensure high efficiency and high reliability of the power supply.Low cost also makes it more acceptable for general usage.If you have any questions, please do not hesitate to contact us at Email: [email protected]

Tải xuống Yêu cầu báo giá

Sự miêu tả

Thông số kỹ thuật & Model

Specification	S-600-15	S-600-24	S-600-36	S-600-48
DC output voltage,current	15V 0～50A	24V 0～25A	36V 0~16.7A	48V0～12.5A
Wave and noise	100mVp-P	150mVp-P	150mVp-P	150mVp-P
Inlet wire stability	±0.5%	±0.5%	±0.5%	±0.5%
Load stability	±0.5%	±0.5%	±0.5%	±0.5%
Efficiency	0.83	0.85	0.86	0.87
Adjustable range for DC voltage	±10%	±10%	±10%	±10%
Input voltage range	90～132VAC/180~264VAC by switch 254～370VDC 47～63Hz
Impact current	Cold start current 25A/115VAC 50A/230VAC
Overload protection	105%～300%cut off the output,automatic recovery
Over voltage protection	115%～140%shut down O/P voltage,re-power on to recover
Setup,rise,hold uptime	800ms,20ms,36ms/230VAC at full load
Withstand voltage	I/P-O/P:1.5kV I/P-FG:1.5kV O/P-FG:0.5kV 1minute
Isolation resistance	I/P-O/P I/P-FG O/P-FG:500VDC/100MΩ
Working temperature	-10℃~+50℃
Kích thước	238×124×65mm
Weight	1.5kg
đóng gói	44×26×27CM/12PCS/18kg