SP-15000-30 Mega Drone Charging Power | 15000W 30V Heavy-Duty
Massive Charging Capacity: A colossal 15000W output engineered for industrial-scale drone battery charging cabinets and command centers.
Smart Grid Compatible: Features Active PFC (>0.99) and dual-stage AC input logic (95-190VAC / 195-265VAC) for maximum electrical efficiency.
Data-Driven Operations: Fully integrates with upper-level computer systems via Modbus for automated, unattended charging fleet management.
Fault-Proof Protections: Users can set custom over-current delays and over-voltage thresholds, ensuring maximum safety for high-value battery assets.
- Beschreibung
Zusammenfassung
Single output: power 15000W
Eingangsspannung: 95–190 VAC (Ausgangsstrom 50%) 195–265 VAC (Ausgangsstrom 100%)
Merkmale
1.Protection type: short circuit/overcurrent/overvoltage/overtemperature
2.Power factor PF≧0.99
3.Working efficiency up to 93%
4.485 communication control
Allgemeine Spezifikation
| Modell | SP-15000-30 | SP-15000-36 | SP-15000-48 | SP-15000-60 | SP-15000-110 | SP-15000-220 |
| Gleichspannung | 30V | 36V | 48V | 60V | 110V | 220V |
| Nennstrom | 400A | 333,3A | 250A | 200A | 109.1A | 54.5A |
| Aktueller Bereich | 0-400A | 0-333,3A | 0-250A | 0-200A | 0-109.1A | 0-54.5A |
| Nennleistung | 15000W | |||||
| Welligkeit | 500 mV | 500 mV | 600 mV | 600 mV | 1000 mV | 1500 mV |
| Constant current optimum ran | 15-30V | 18-36V | 24-48V | 30-60V | 55-110V | 110–220 V |
| Genauigkeit der Nennspannung | ±1,0% | |||||
| Linienregulierung | ±1,0% | |||||
| Lastregulierung | ±1,0% | |||||
| Start- und Anstiegszeit | 1500 mS, 700 mS/230 VAC (voll beladen) | |||||
| Spannungsbereich | 95–190 VAC (Ausgangsstrom 50%), 195–265 VAC (Ausgangsstrom 100%) | |||||
| Frequenzbereich | 45Hz-65Hz | |||||
| Leistungsfaktor | PF≥0,99/230VAC (voll beladen) | |||||
| Effizienz (MAX) | 91% | 91.5% | 92% | 92% | 92.5% | 93% |
| Wechselstrom | <110A | |||||
| Leckstrom | <3,0 mA/240 VAC | |||||
| Kurzschluss | Enter the constant curent and the voltage is less than 10%of the rated voltage,turm off and lockthe output after 1 second,and resume after restart | |||||
| Überstrom | The user can set a delay of5 seconds after the current value is turned off,and the output can be restored after restart. | |||||
| Überdruck | The user can set the overvoltage value to turn off the output voltage,and resume after restart. | |||||
| Übertemperatur | Turnoffthe output and automatically recover or restart after the temperature drops | |||||
| Einstellung der Ausgangsspannung | 0-33V | 0-39,6 V | 0-52,8 V | 0-66V | 0-121V | 0-242V |
| Einstellung des Ausgangskonstantenstroms | 0-400A | 0-333,3A | 0-250A | 0-200A | 0-109.1A | 0-54.5A |
| 485 Kommunikation | MODBUS-Kommunikationsprotokoll | |||||
| lsolating auxiliary power supply | 12V0,5A (Anpassung erforderlich) | |||||
| Output remote control switch | Default power on,high level power off(⑤V-12V)(Need customization) | |||||
| Alarm output | Power-Good-Signal (Trockenkontakt ≤ 36 V, 0,1 A) (Anpassung erforderlich) | |||||
| Working TEMP. | -20-+60℃ | |||||
| Working humidity | -20-90%RHnon-condensing | |||||
| Lagertemperatur und Luftfeuchtigkeit | -40-+85℃,10-95%RH non-condensation | |||||
| Vibration | 10-500Hz,2G 10minsT,义、Y、Zaxis 60 minutes each | |||||
| Isolationswiderstand | Eingang zu Ausgang: 100 Mhms/500 VDC/25 °C/70%RH | |||||
| Spannung standhalten | I/P-O/P:2KVAC IP-FG:2KVAC O/P-FG:0,5KVAC | |||||
| Dimension | 455×345×251mm | |||||
| Nettogewicht | 22 kg | |||||
Gesamtabmessungen (mm)
VERWANDTE PRODUKTE
Was sind die besten Stromversorgungsprodukte für Ihr Unternehmen?
Steigern Sie Ihr Geschäft mit den hochwertigen Stromversorgungsprodukten von WEHO.
Fragen Sie einen Experten