6000W PID Adjustable Voltage Battery Charger for Lead-Acid & Lithium Battery Packs With PFC
Extreme Scale 13.8V/14.6V/27.6V/29.2V/55.2V/58.4V Power: Designed for massive industrial battery arrays. These units offer broad voltage adjustment ranges (e.g., 15-30V, 30-60V, 55-110V) to precisely charge 13.8V Lead-Acid float or 58.4V LiFePO4 packs.
Modbus Communication Integration: Features Modbus protocol via 485 communication for smart grid and factory automation integration. Supports customizable remote switch and auxiliary 12V power outputs. Reliable Constant Current Architecture: Utilizes professional CC protection that shuts down and locks output if parameters fall out of safe range, protecting high-value lithium cells from degradation.
Heavy-Industrial Durability: Built into a robust 432x179x242mm chassis with 93% maximum efficiency. Operates reliably from -20°C to +80°C in high-demand environments.
- Beschreibung
| Modell | HPS-6000-24 | HPS-6000-30 | HPS-6000-36 | HPS-6000-48 | HPS-6000-60 | HPS-6000-110 | HPS-6000-220 |
| Gleichspannung | 24V | 30V | 36V | 48V | 60V | 110V | 220V |
| Nennstrom | 225A | 180A | 150A | 112.5A | 90A | 49.1A | 24.5A |
| Aktueller Bereich | 0-225A | 0-180A | 0-150A | 0-112.5A | 0-90A | 0-49.1A | 0-24.5A |
| Nennleistung | 6000W | ||||||
| Welligkeit | 500 mV | 500 mV | 500 mV | 600 mV | 600 mV | 1000 mV | 1500 mV |
| Optimaler Konstantstrombereich | 12-24V | 15-30V | 18-36V | 24-48V | 30-60V | 55-110V | 110–220 V |
| Genauigkeit der Nennspannung | ± 1,0% | ||||||
| Linienregulierung | ±1,0% | ||||||
| Lastregulierung | ±1,0% | ||||||
| Start- und Anstiegszeit | 1500mS,700mS/230VAC(Fully loaded) | ||||||
| Spannungsbereich | 95–190 VAC (Ausgangsstrom 50%), 195–265 VAC (Ausgangsstrom 100%) | ||||||
| Frequenzbereich | 45Hz-65Hz | ||||||
| Leistungsfaktor | PF≥0.99/230VAC(Fully loaded) | ||||||
| Effizienz (MAX) | 90% | 90% | 91.5% | 92% | 92% | 92.5% | 93% |
| ACCurent | <56A | ||||||
| Leckstrom | <3,0 mA/240 VAC | ||||||
| Kurzschluss | Wnen the constant curent is entered and the voltageis lower han 10%of the rated voltage,the utoutis shut down and loked afe 1 second,and recovers after restating | ||||||
| Überstrom | The user can set the over-current value to delay the output for 5 seconds and then shut down the output,and then resume after restarting. | ||||||
| Überdruck | Users can set the overvoltage value t shut down the output voltage,and restore after restart. | ||||||
| Übertemperatur | Schalten Sie den Ausgang aus, stellen Sie ihn automatisch wieder her oder starten Sie ihn neu, nachdem die Temperatur gesunken ist. | ||||||
| Einstellung der Ausgangsspannung | 0-26,4 V | 0-33V | 0-39,6 V | 0-52,8 V | 0-66V | 0-121V | 0-242V |
| Einstellung des Ausgangskonstantenstroms | 0-225A | 0-180A | 0-150A | 0-112.5A | 0-90A | 0-49.1A | 0-24.5A |
| 485Communications | MODBUS-Kommunikationsprotokoll | ||||||
| solated auxiliary power supply | 12V0.5A(Need customization) | ||||||
| Ausgangsfernschalter | Standardmäßiges Einschalten, hohes Ausschalten (5V-12V) (Anpassung erforderlich) | ||||||
| Alarmsignaloutput | Power Good Signal (Dry Contact≤36V,0.1A) Need customization) | ||||||
| Betriebstemperatur | -20-+60℃ | ||||||
| Betriebsfeuchtigkeit | -20-90%RH Keine Kondensation | ||||||
| Storage temperatureandhumidity | -40-+85℃,10-95%RHKeine Kondensation | ||||||
| Vibrationsfestigkeit | i0-500Hz,2G10 Min/cycle,X、Y、之60 Min | ||||||
| insulation resistance | input to Output:100Mhms/500VDC/25°C/70%RH | ||||||
| Druckfestigkeit | I/P-O/P:2KVAC IP-FG:2KVAC O/P-FG:0,5KVAC | ||||||
| size | 432×179×242mm | ||||||
| net weight | 9kg | ||||||
Was sind die besten Stromversorgungsprodukte für Ihr Unternehmen?
Steigern Sie Ihr Geschäft mit den hochwertigen Stromversorgungsprodukten von WEHO.
Fragen Sie einen Experten