Rango de corriente de salida
| Modelo | MS-35-5 | MS-35-12 | MS-35-24 | |
| Producción | Voltaje de salida CC | 5V | 12V | 24V |
| Tolerancia del voltaje de salida | ±1% | ±1% | ±1% | |
| Corriente de salida nominal | 6A | 3.0A | 1.5A | |
| 0～6A | 0～3.0A | 0～1.5A | ||
| Potencia de salida | 25W | 36W | 36W | |
| Ondulación y el ruido | 80mVp-p | 120mVp-p | 120mVp-p | |
| Alcance ajustable de voltaje CC | -9%～+10% | ±10% | ±10% | |
| Empiece, levántese, mantenga el tiempo | 800ms,20ms,24ms/230VAC. | |||
| Aporte | Rango de voltaje de entrada | 170~264 VCA 47~63 Hz, 235~373 VCC | ||
| Corriente de entrada de intercambio | 0.45A/230VAC | |||
| Eficiencia | 77% | 81% | 84% | |
| Corriente de impulso | Corriente de arranque en frío 30A/230VAC | |||
| Corriente de fuga | <1mA/240VCA | |||
| Protection characteristics | Protección contra sobrecarga | Protection way: fold layer type load current limiting, abnormal conditions can be removed recovery | ||
| environment | Temperatura de trabajo, humedad | -10℃～+60℃;20%～90%RH(Please refer to reduce the specified number load curve ) | ||
| Mantener la temperatura, la humedad | -20 ℃ ~ +85 ℃; 10% ~ 95%RH Sin condensación | |||
| Resistencia a la vibración | 10~500Hz,2G 10min./ 1 tiempo de ciclo, 60 minutos, el eje | |||
| security | Sexo de compresión | Entrada/salida: 1,5 KVAC de entrada y entre salida KVAC y tierra: 1,5:0,5 KVAC | ||
| Resistencia de aislamiento | Between the input and output, the output and input: with the ground: 100 M / 500 VDC Ohms | |||
| Complies with the standards | Estándares de seguridad | Cumplir con los requisitos UL1012 | ||
| Estándar EMC | Accord with | |||
| EN55022, CLASSA | ||||
| other | Peso | 0.17kg 84*58*38（L*W*H） | ||
| Embalaje | 0.17kg/80pcs/14.5kg/0.9CUFT | |||
| note | 1. All the parameters have not been specified, all are in 230V voltage input, AC-rated load, and 25℃ conditions measuring income value. | |||
| 2. Ripple and noise voltage are in 20MHz bandwidth with 1 to 2 inches oscilloscope twisted pair end and 0.1mu and 47 muons capacitance measurement when. | ||||
| 3. Tolerance is voltage setting error, the voltage adjustment rate, and adjusting the sum total of the current rate. | ||||
