S-800W series normal single switching power supply

WeHo professional 800W Switching CNC Power Supply can be widely used in Industrial Automation and CNC Stepper/Servo Systems.
115V and 230V can be chosen by the switch.Powerful functions(eg. PWM control) and professional designs (Built-in big fan for cooling) ensure high efficiency and high reliability of the power supply.Low cost also makes it more acceptable for general usage.If you have any questions, please do not hesitate to contact us at Correo electrónico: [email protected]

Descargar Solicitar una cotización

Descripción

Especificaciones y modelo

Especificación	S-800-12	S-800-24	S-800-36	S-800-48
Tensión de salida CC, corriente	12V 0～66A	24V 0～33A	36V 0~22A	48V 0～17A
Ola y ruido	150mVp-P	180mVp-P	180mVp-P	240mVp-P
Estabilidad del cable de entrada	±0,5%	±0,5%	±0,5%	±0,5%
Estabilidad de carga	±0,5%	±0,5%	±0,5%	±0,5%
Eficiencia	0.8	0.85	0.85	0.87
Rango ajustable para voltaje CC	±10%	±10%	±10%	±10%
Rango de voltaje de entrada	100～132VAC/200～264VAC by switch 254～370VDC 47～63Hz
Corriente de impacto	Cold start current 45A/230VAC
Protección contra sobrecarga	105%～135%cut off the output,automatic recovery
Otra protección	Over current protection/Short-circuit protection
Configurar, levantarse, mantener el tiempo de actividad	2000ms,50ms,20ms/230VAC at full load
Voltaje de soporte	I/P-O/P:1,5 kV I/P-FG:1,5 kV O/P-FG:0,5 kV 1 minuto
Resistencia de aislamiento	I/P-O/P I/P-FG O/P-FG:500VDC/100MΩ
Temperatura de trabajo	-10℃~+50℃
Dimensión	291×132×68mm
Peso	2.65kg
Embalaje	37.5×31×25.5CM/6PCS/16kg

Diseño

Características

This product has an integrated design that minimizes temperature rise and calorific value.

Weho stocks 200,000 sets of commonly used models, ensuring quick delivery.

The product is highly stable, the workmanship is steady, the output voltage is consistent, and there is no drift.

This product has a minimum order quantity of 100 pieces and can be customized with labels.

This product has Automatic Recovery short-circuit protection.

This product is both low-cost and reliable.

This product is covered by a 24-month warranty.

Product size: 291*132*68mm (L * W * H)

U.S. Switching Power Supply Manufacturers

By reducing the operating current and junction temperature, the stress of the device can be reduced and the reliability of the product can be greatly improved.

Modularization is the general trend in the development of switching power supply.

Distributed power supply systems can be composed of a modular power supply, N+1 redundant power supply system can be designed, and the capacity expansion of parallel mode can be realized.

In view of the disadvantage of high operating noise of switching power supply, if high frequency is pursued alone, its noise will also increase.

The partial resonance conversion circuit technology can theoretically achieve high frequency and reduce noise.

However, there are still technical problems in the practical application of partial resonance conversion technology, so a lot of work still needs to be done in this field to make many technologies practical.