SP-3000 High Power Switching Power Supply

SP-3000 is a 3KW single output chassis type AC to DC power supply. The entire series input voltage range is 95-265VAC, and can provide DC output for most industrial needs.
Each chassis can be air-cooled through an internal speed-controlled fan, and the operating temperature is close to 60°C.Built-in multiple functions such as output voltage,Current adjustable, current sharing, remote on/off control, 485 communication control, auxiliary power supply and other functions provide a variety of flexible designs.If you have any questions, please do not hesitate to contact us atEmail: [email protected]

Solicitar una cotización

Descripción

Características

1、Voltage input range: 95-265VAC
2、Protection type: short circuit/overcurrent/overvoltage/overtemperature
3、Power factor PF≧0.99
4、Working efficiency up to 93%
5、485 communication control

Parámetros técnicos

Modelo		SP-3000-12	SP-3000-24	SP-3000-36	SP-3000-48	SP-3000-60	SP-3000-220
Producción	DC voltage	12V	24V	36V	48V	60V	220V
	Corriente nominal	180A	125A	83.3A	62.5A	50A	13.6A
	Rango actual	0 – 180A	0 – 125A	0 – 83.3A	0 – 62.5A	0 – 50A	0 – 13.6A
	Potencia nominal	2700W	3000W
	Onda	200mV	200mV	260mV	300mV	500mV	1000mV
	Rango óptimo de corriente constante	6 – 15V	12 – 24V	18 – 36V	24 – 48V	30 – 60V	110 – 220V
	Rated voltage accuracy	± 1.0%
	Regulación de línea	± 1.0%
	Regulación de carga	± 1.0%
	Tiempo de inicio y subida	1500mS，700mS/230VAC(Fully loaded）
Aporte	Voltage range	95-190VAC(Output Current 50%),195-265VAC(Output Current 100%)
	Rango de frecuencia	45Hz – 65Hz
	Factor de potencia	PF≧0.99/230VAC(Fully loaded)
	Efficinecy(MAX)	87 %	90 %	91.5 %	92 %	92.5 %	93 %
	Ac Current	＜18A
	Corriente de fuga	＜3.0mA / 240VAC
Protect	Cortocircuito	When the constant current is entered and the voltage is lower than 10% of the rated voltage, the output is shut down and locked after 1 second, and recovers after restarting.
	Overcurrent	The user can set the over-current value to delay the output for 5 seconds and then shut down the output, and then resume after restarting.
	Overpressure	Users can set the overvoltage value to shut down the output voltage, and restore after restart
	Sobre temperatura	Shut down the output, automatically recover or restart after the temperature drops
Function	Ajuste del voltaje de salida	0 – 15V	0 – 26.4V	0 – 39.6V	0 – 52.8V	0 – 66V	0 – 242V
	Ajuste de corriente constante de salida	0 – 180A	0 – 125A	0 – 83.3A	0 – 62.5A	0 – 50A	0 – 13.6A
	Current Sharing	Parallel current sharing
	Isolated auxiliary power supply	12V 0.5A
	Output remote switch	Default power on, high level power off （5V-12V）
	Alarm signal output	Power Good Signal (Dry Contact≦36V,0.1A)
Ambiente	Temperatura de funcionamiento	-20 – +60℃
	Humedad de funcionamiento	-20 – 90% RH No condensation
	Storage temperature and humidity	-40 – +85℃, 10 – 95% RH No condensation
	Resistencia a las vibraciones	10 – 500Hz, 2G 10 Min/cycle, X、Y、Z 60 Min
Seguridad	Resistencia a aislamiento	Input to Output:100Mhms/500VDC/25℃/70%RH
Seguridad	Resistencia a la presión	I/P-O/P:2KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
Otro	Size	28917469mm（LWH）
Otro	Net Weight	3.3 KG
Observación	1. Todos los parámetros se miden con un voltaje de entrada de 230 VCA, carga nominal y 25 ℃, a menos que se especifique lo contrario. 2. La ondulación y el voltaje de ruido se miden con un osciloscopio de ancho de banda de 20 MHz con condensadores de 0,1 μ y 47 μ agregados al extremo de un par trenzado de 12 pulgadas y se miden con un ancho de banda de 20 MHz. 3. Accuracy: includes setting error, linear regulation rate and load regulation rate. 4. Output must be derated for low input voltage. Please refer to the static characteristic curve for details. 5. Startup time is measured under cold start. Frequent switching may increase the startup time.