SP-3000 High Power Switching Power Supply

SP-3000 is a 3KW single output chassis type AC to DC power supply. The entire series input voltage range is 95-265VAC, and can provide DC output for most industrial needs.
Each chassis can be air-cooled through an internal speed-controlled fan, and the operating temperature is close to 60°C.Built-in multiple functions such as output voltage,Current adjustable, current sharing, remote on/off control, 485 communication control, auxiliary power supply and other functions provide a variety of flexible designs.

If you have any questions, please do not hesitate to contact us at Email: [email protected]

Scaricamento Richiedi un preventivo

Descrizione

Riepilogo

Single output: power 3000W

Input voltage: 95-190VAC(output current 50%)195-265VAC(output current 100%)

Caratteristiche

1. Protection type: short circuit/overcurrent/overvoltage/overtemperature
2. Power factor PF≧0.99
3. Working efficiency up to 93%
4. 485 communication control

Specifica generale

Modello	SP-3000-12	SP-3000-24	SP-3000-30	SP-3000-36	SP-3000-48	SP-3000-60	SP-3000-220
Tensione CC	12V	24 V	30V	36V	48 V	60 V	220 V
Corrente nominale	130A	125A	100A	83.3A	62,5A	50A	13.6A
Gamma attuale	0-130A	0-125A	0-100A	0-83.3A	0-62,5A	0-50A	0-13.6A
Potenza nominale	2700W	3000W
Ondulazione	200mV	200mV	230mV	260mV	300mV	500mV	1000mV
Intervallo ottimale di corrente costante	6-15V	12-24 V	15-30V	18-36 V	24-48V	30-60V	110-220 V
Precisione della tensione nominale	±1,0%
Regolamento di linea	±1,0%
Regolazione del carico	±1,0%
Startup&Rise Time	1500mS,700mS/230VAC (Fully loaded)
Intervallo di tensione	95-190VAC(Output Current 50%),195-265VAC(Output Curent 100%)
Gamma di frequenza	45Hz-65Hz
Fattore di potenza	PF≥0.99/230VAC (Fully loaded)
Efficienza (MAX)	0.9	0.9	0.91	0.915	0.92	0.925	0.93
Corrente CA	<18A
Corrente di dispersione	<3,0 mA/240 V CA
Cortocircuito	When the constant current is entered and the voltage is lower than 10%of the rated voltage,the output is shut down and locked after 1 second,and recovers after restarting.
Over current	The user can set the over-current value to delay the oufput for 5 seconds and then shut down the output,and then resume after restarting.
Sovrapressione	Users can set the overvoltage value to shut down the output voltage,and restore after restart.
Sovratemperatura	Shut down the output,automatically recover or restart after the temperature drops.
Regolazione della tensione di uscita	0-15V	0-26,4 V	0-33V	0-39,6 V	0-52,8 V	0-66V	0-242 V
Regolazione della corrente costante in uscita	0-130A	0-125A	0-100A	0-83.3A	0-62,5A	0-50A	0-13.6A
485 Comunicazioni	Parallel current sharing
Alimentazione ausiliaria isolata	12 V 0,5 A
Interruttore remoto di uscita	Default power on,high level power off(5V-12V)
Uscita del segnale di allarme	Power Good Signal(Dry Contact≤36V,0.1A)
Temperatura operativa	-20-+60℃
Umidità operativa	-20-90% RH No condensation
Storage emperatureandhumidity	-40-+85℃,10-95%RHNo condensation
Resistenza alle vibrazioni	10-500Hz,2G10Min/cycle,X、Y、 Ż60Min_
Resistenza di isolamento	Input to Output:100Mhms/500VDC/25°C/70%RH
Resistenza alla pressione	I/P-O/P:2KVAC IP-FG:2KVAC O/P-FG:0.5KVAC
Misurare	289×174×69mm
Peso netto	3.3 kg