Alimentation à sortie unique SP-9000 avec PFC

Le SP-9000 est une alimentation CA vers CC de type châssis à sortie unique de 9 KW.
Supports 95-265VAC full range input, wide voltage input, no need to switch.Moreover, the voltage and current output can be adjusted at will and can also be locked.Other output voltages also support customization.Can be used in industrial control or automation devices, laser-related machines, UV curing equipment, charging equipment, test and measurement instruments, and aging equipment.

If you have any questions, please do not hesitate to contact us atEmail: [email protected]

Télécharger Demander un devis

Description

Résumé

Single output: Power 9000W

Input voltage: 95-190VAC(output current 50%)195-265VAC(output current 100%)

Caractéristiques

1.Voltage input range: 95-265VAC
2.Protection type: short circuit/overcurrent/overvoltage/overtemperature
3.Power factor PF≧0.99
4.Working efficiency up to 93%
5.485 communication control

Spécification générale

Modèle	SP-9000-24	SP-9000-30	SP-9000-36	SP-9000-48	SP-9000-60	SP-9000-110	SP-9000-220
Tension continue	24V	30V	36V	48V	60V	110V	220V
Courant nominal	337.5A	270A	225A	168.8A	135A	73.6A	36.8A
Plage actuelle	0-337.5A	0-270A	0-225A	0-168.8A	0-135A	0-73.6A	0-36.8A
Puissance nominale	9000W
Ondulation	500mV	500mV	500mV	600mV	600mV	1000mV	1500mV
Plage optimale à courant constant	12-24V	15-30V	18-36V	24-48V	30-60V	55-110V	110-220V
Précision de la tension nominale	±1,0%
Régulation de ligne	±1,0%
Régulation de charge	±1,0%
Startup&Rise Time	1500mS,700mS/230VAC (Fully loaded)
Plage de tension	95-190VAC(Output Current 50%),195-265VAC(Output Curent 100%)
Gamme de fréquence	45Hz-65Hz
Facteur de puissance	PF≥0.99/230VAC (Fully loaded)
Efficacité (MAX)	0.9	0.9	0.915	0.92	0.92	0.925	0.93
Courant alternatif	<56A
Courant de fuite	<3,0 mA/240 VCA
Court-circuit	When the constant current is entered and the voltage is lower than 10%of the rated voltage,the output is shut down and locked after 1 second,and recover after restarting.
Over current	The user can set the over-curent value to delay the oufout for 5 seconds and then shut down the output,and then resume after restarting.
Surpression	Users can set the overvoltage value to shut down the output voltage,and restore after restart.
Surchauffe	Shut down the output,automatically recover or restart after the temperature drops.
Réglage de la tension de sortie	0-26,4V	0-33V	0-39,6V	0-52,8V	0-66V	0-121V	0-242V
Réglage du courant constant de sortie	0-337.5A	0-270A	0-225A	0-168.8A	0-135A	0-73.6A	0-36.8A
485 Communications	Protocole de communication MODBUS
Isolated auxiliary	12V0.5A (Need customization)
Commutateur à distance de sortie	Default power on,high level power off (5V-12V)(Need customization)
Sortie de signal d'alarme	Power Good Signal(Dry Contact≤36V,0.1A) (Need customization)
Température de fonctionnement	-20-+60℃
Humidité de fonctionnement	-20-90%RH No condensation
Température et humidité de stockage	-40-+85℃,10-95%RHNo condensation
Résistance aux vibrations	110-500Hz,2G10 Min/cycle, X,Y,Z60 Min
Insulaion resistance	输入输出：100Mhms/500VDC/25°C/70%RH Input to Output:100Mhms/500VDC/25°C/70%RH
Résistance à la pression	I/P-O/P:2KVAC IP-FG:2KVAC O/P-FG:0.5KVAC
Taille	432×179×242mm
Poids net	12.5 kg