SP-9000 Alimentatore a uscita singola con PFC

SP-9000 è un alimentatore CA-CC di tipo chassis a uscita singola da 9KW.
Supports 95-265VAC full range input, wide voltage input, no need to switch.Moreover, the voltage and current output can be adjusted at will and can also be locked.Other output voltages also support customization.Can be used in industrial control or automation devices, laser-related machines, UV curing equipment, charging equipment, test and measurement instruments, and aging equipment.

If you have any questions, please do not hesitate to contact us atEmail: [email protected]

Scaricamento Richiedi un preventivo

Descrizione

Riepilogo

Single output: Power 9000W

Input voltage: 95-190VAC(output current 50%)195-265VAC(output current 100%)

Caratteristiche

1.Voltage input range: 95-265VAC
2.Protection type: short circuit/overcurrent/overvoltage/overtemperature
3.Power factor PF≧0.99
4.Working efficiency up to 93%
5.485 communication control

Specifica generale

Modello	SP-9000-24	SP-9000-30	SP-9000-36	SP-9000-48	SP-9000-60	SP-9000-110	SP-9000-220
Tensione CC	24 V	30V	36V	48 V	60 V	110 V	220 V
Corrente nominale	337.5A	270A	225A	168.8A	135A	73.6A	36.8A
Gamma attuale	0-337.5A	0-270A	0-225A	0-168.8A	0-135A	0-73.6A	0-36.8A
Potenza nominale	9000W
Ondulazione	500mV	500mV	500mV	600mV	600mV	1000mV	1500mV
Intervallo ottimale di corrente costante	12-24 V	15-30V	18-36 V	24-48V	30-60V	55-110 V	110-220 V
Precisione della tensione nominale	±1,0%
Regolamento di linea	±1,0%
Regolazione del carico	±1,0%
Startup&Rise Time	1500mS,700mS/230VAC (Fully loaded)
Intervallo di tensione	95-190VAC(Output Current 50%),195-265VAC(Output Curent 100%)
Gamma di frequenza	45Hz-65Hz
Fattore di potenza	PF≥0.99/230VAC (Fully loaded)
Efficienza (MAX)	0.9	0.9	0.915	0.92	0.92	0.925	0.93
Corrente CA	<56A
Corrente di dispersione	<3,0 mA/240 V CA
Cortocircuito	When the constant current is entered and the voltage is lower than 10%of the rated voltage,the output is shut down and locked after 1 second,and recover after restarting.
Over current	The user can set the over-curent value to delay the oufout for 5 seconds and then shut down the output,and then resume after restarting.
Sovrapressione	Users can set the overvoltage value to shut down the output voltage,and restore after restart.
Sovratemperatura	Shut down the output,automatically recover or restart after the temperature drops.
Regolazione della tensione di uscita	0-26,4 V	0-33V	0-39,6 V	0-52,8 V	0-66V	0-121 V	0-242 V
Regolazione della corrente costante in uscita	0-337.5A	0-270A	0-225A	0-168.8A	0-135A	0-73.6A	0-36.8A
485 Comunicazioni	Protocollo di comunicazione MODBUS
Isolated auxiliary	12V0.5A (Need customization)
Interruttore remoto di uscita	Default power on,high level power off (5V-12V)(Need customization)
Uscita del segnale di allarme	Power Good Signal(Dry Contact≤36V,0.1A) (Need customization)
Temperatura operativa	-20-+60℃
Umidità operativa	-20-90%RH No condensation
Temperatura e umidità di conservazione	-40-+85℃,10-95%RHNo condensation
Resistenza alle vibrazioni	110-500Hz,2G10 Min/cycle, X,Y,Z60 Min
Insulaion resistance	输入输出：100Mhms/500VDC/25°C/70%RH Input to Output:100Mhms/500VDC/25°C/70%RH
Resistenza alla pressione	I/P-O/P:2KVAC IP-FG:2KVAC O/P-FG:0.5KVAC
Misurare	432×179×242mm
Peso netto	12.5 kg