प्लास्टिक शेल 5V/12V/24V/48V डीसी डिनरेल बिजली की आपूर्ति 100w

MDR-100 is a slim line DIN rail Class I switching power supply.
Designed with a fully isolated plastic case to prevent user contact and the risk of shock.Featuring up to 88% efficiency this series can be cooled using only free air convection up to 60°C which significantly increases the reliability and lifetime of the power supply.Other standard features include its low no-load power consumption, to save energy, short circuit, overload, and over voltage protections, and DC OK relay contact with LED indicator for monitoring the PSU status.If you have any questions, please do not hesitate to contact us at ईमेल: [email protected]

डाउनलोड करना एक उद्धरण का अनुरोध करें

विवरण

विशिष्टताएँ एवं मॉडल

नमूना		MDR-100-12	MDR-100-15	MDR-100-24	MDR-100-48
उत्पादन	दिष्ट विद्युत धारा का वोल्टेज	12वी	15V	24V	48V
	वर्तमान मूल्यांकित	7.5A	6.7A	4 ए	2ए
	वर्तमान सीमा	0 ~ 7.5A	0 ~6.7A	0 -4A	0-2A
	मूल्यांकित शक्ति	100W	100W	100W	100W
	तरंग एवं शोर (अधिकतम)	80mVp-पी	120mVp-पी	150mVp-पी	200mVp-पी
	Volage ADJ Range	12 -13.2V	15-16.5V	24 – 26.4V	48 ~ 56V
	वोल्टेज सहनशीलता	±2.0%	±1.0%	±1.0%	±1.0%
	रेखा विनियमन	±1.0%	±1.0%	±1.0%	±1.0%
	लोड विनियमन	±1.5%	±1.0%	±1.0%	±1.0%
	Setup, Rise Time Note.5	500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load
	Hold Up Time (Typ.)	50एमएस/230वीएसी 20ms/115VAC at full load
इनपुट	वोल्टेज रेंज	85~264VAC 120~370VDC
	आवृति सीमा	47 ~ 63 हर्ट्ज
	दक्षता (प्रकार)	78%	86%	88%	87%
	AC Current(Typ.)	1.8A/115VAC 1A/230VAC
	इनरश करंट (प्रकार)	Cold start: 30A/115VAC, 60A/230VAC
	रिसाव धारा	<1mA/240VAC
सुरक्षा	अधिभार	105% – 150% rated output power
		Protection type: Constant current limiting, recovers automatically after fault condition is removed
	Overvoltage	6.25-7.25V	15.6 – 18V	31.2-36V	57.6 – 64.8V
		सुरक्षा प्रकार: ओ/पी वोल्टेज बंद करें, ठीक होने के लिए पुनः बिजली चालू करें
समारोह	DC Signal	Relay contact rating (max.): 30V/1A resistive
पर्यावरण	कार्यशील आर्द्रता	20% ~ 90%RH non-condensing
	भंडारण तापमान, आर्द्रता	-40°C ~ +85°C, 10% ~ 95%RH
	तापमान गुणांक	±0.03%/°C (0 – 50°C)
	कंपन	Component: 10 – 500Hz, 2G 10min./1 cycle, the period for 60min. each along X, Y, and Z axes; Mounting: Compliance to IEC60068-2-6
सुरक्षा एवं ईएमसी	सुरक्षा मानक	UL508, UL60950-1, TUV EN60950-1 approved
	वोल्टेज का सामना करें	l/P-0/P: 3KVAC l/P-FG: 2KVAC 0/P-FG: 0.5KVAC
	अलगाव प्रतिरोध	l/P-O/P, l/P-FG, 0/P-FG:>100M Ohms/500VDC/25°C/70% RH
	ईएमसी उत्सर्जन	Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3
	ईएमसी प्रतिरक्षा	Compliance to EN6100(M-2,3,4,5,6,8,11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A
अन्य	एमटीबीएफ	299.2K hrs min. MIL-HDBK-217F (25°C)
	आयाम	5090100mm (WHD)
	पैकिंग	0.42Kg; 30pcs/20Kg/0.82CUFT
टिप्पणी	1. विशेष रूप से उल्लिखित नहीं किए गए सभी पैरामीटर 230VAC इनपुट, रेटेड लोड और 25°C परिवेश तापमान पर मापे जाते हैं।.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
	3. सहनशीलता: इसमें सेट अप सहनशीलता, लाइन विनियमन और लोड विनियमन शामिल है।.
	4. The power supply is considered a component that will be installed into the final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.
	5. The length of set-up time is measured at the first cold start. Turning ON/OFF the power supply may lead to an increase in the set-up time.