Blog

24V Power Supply Selection for Commercial Digital Signage and Information Displays

Select a 24V commercial digital-signage supply using a 160W load example, protected DC branches, 230VAC selector checks, airflow and the

24V Auxiliary Power Supply Selection for Telecom and Base-Station Cabinets

Select a 24V telecom auxiliary supply using a 240W load example, active PFC, protected branches, 230VAC inrush and the RSP-320-24

24V DIN-Rail Power Supply Selection for Elevator and Escalator Control Systems

Select a 24V DIN-rail supply for elevator and escalator control loads using the NDR-120-24 rating, load states, derating, voltage drop

24V Power Supply Selection for Industrial Peltier/TEC Thermal-Control Panels

Select a 24V supply for industrial Peltier and TEC panels using MDR-100-24 evidence, controller duty, derating, voltage drop, protection and

24V Power Supply Selection for Servo-Motor Brake and Control Circuits

Evaluate the WEHO S-150-24 for a 24V servo-brake and control bus using a 5.30A worked load map, selector, voltage-drop, thermal,

EDR-150-24 for a 230VAC Cold-Storage Door Control Panel: A Practical 24V Load Map

Map a 6.0A cold-storage door control load and check EDR-150-24 capacity at 230VAC, including input rating, peaks, derating, wiring, and

24V Waterproof LED Driver Sizing for Architectural Facade Lighting: HLG-150-24

Size a 24V commercial facade-lighting load for HLG-150-24, including 120W worked example, cable drop, IP67 installation details, and exact mechanical

Battery-Backed Access Control Power: PSC-150-12 Load and Charge Budget

Assess PSC-150-12 for 13.8V access-control loads and battery charging, with 7.5A main, 3A charge, 150W aggregate, and 159 x 97

48V to 5V DC-DC Converter Selection for Telecom, IoT, and Control Modules

48v to 5v converter selection guide for source range, output current, wiring, protection, derating, heat, and WEHO model confirmation.

12V to 13.8V DC-DC Converter Selection for Radio and Communication Equipment

12v to 13.8v converter selection guide for source range, output current, wiring, protection, derating, heat, and WEHO model confirmation.

Convertitore DC-DC da 12V a 48V per sistemi industriali

Guida alla selezione del convertitore da 12v a 48v per la gamma di sorgenti, la corrente di uscita, il cablaggio, la protezione, il derating, il calore e la conferma del modello WEHO.

Print-and-Apply Labeling System 24V Power: Map Interface, Sensor and Applicator Loads

Map print-engine interface ownership and cycle-state 24V loads before reviewing a control-power supply for a print-and-apply labeling system.

Hai bisogno di maggiori informazioni sui nostri prodotti o processi?

Tutte le categorie di prodotti