Intervallo di corrente di uscita
| Modello | MS-35-5 | MS-35-12 | MS-35-24 | |
| Produzione | Tensione di uscita CC | 5 V | 12V | 24 V |
| Tolleranza sulla tensione di uscita | ±1% | ±1% | ±1% | |
| Corrente di uscita nominale | 6A | 3.0A | 1.5A | |
| 0~6A | 0~3.0A | 0~1.5A | ||
| Potenza in uscita | 25W | 36W | 36W | |
| Ondulazione e rumore | 80mVp | 120mVp-p | 120mVp-p | |
| Cannocchiale regolabile in tensione CC | -9%~+10% | ±10% | ±10% | |
| Inizia, alzati, mantieni il tempo | 800ms,20ms,24ms/230VAC. | |||
| Ingresso | Intervallo di tensione in ingresso | 170~264VCA 47~63Hz, 235~373VCC | ||
| Scambiare la corrente di ingresso | 0.45A/230VAC | |||
| Efficienza | 77% | 81% | 84% | |
| Corrente impulsiva | Corrente di avviamento a freddo 30A/230VAC | |||
| Corrente di dispersione | <1 mA/240 V CA | |||
| Protection characteristics | Protezione da sovraccarico | Protection way: fold layer type load current limiting, abnormal conditions can be removed recovery | ||
| environment | Temperatura di lavoro, umidità | -10℃~+60℃;20%~90%RH(Please refer to reduce the specified number load curve ) | ||
| Mantieni la temperatura, l'umidità | -20℃~+85℃;10%~95%RH Senza condensa | |||
| Resistenza alle vibrazioni | 10~500Hz, 2G 10min./ 1 tempo di ciclo, 60 minuti, l'asse | |||
| security | Sesso compressivo | Input/output: 1.5 KVAC input and between to KVAC output and the earth: 1.5:0.5 KVAC | ||
| Resistenza di isolamento | Between the input and output, the output and input: with the ground: 100 M / 500 VDC Ohms | |||
| Complies with the standards | Standard di sicurezza | Soddisfare i requisiti UL1012 | ||
| Norma EMC | Accord with | |||
| EN55022, CLASSA | ||||
| other | Peso | 0.17kg 84*58*38(L*W*H) | ||
| Confezione | 0.17kg/80pcs/14.5kg/0.9CUFT | |||
| note | 1. All the parameters have not been specified, all are in 230V voltage input, AC-rated load, and 25℃ conditions measuring income value. | |||
| 2. Ripple and noise voltage are in 20MHz bandwidth with 1 to 2 inches oscilloscope twisted pair end and 0.1mu and 47 muons capacitance measurement when. | ||||
| 3. Tolerance is voltage setting error, the voltage adjustment rate, and adjusting the sum total of the current rate. | ||||


