| 모델 | MDR-100-12 | MDR-100-15 | MDR-100-24 | MDR-100-48 | |
| 산출 | DC 전압 | 12V | 15V | 24V | 48V |
| 정격전류 | 7.5A | 6.7A | 4A | 2A | |
| 현재 범위 | 0 ~ 7.5A | 0 ~6.7A | 0 -4A | 0-2A | |
| 정격 출력 | 100W | 100W | 100W | 100W | |
| 리플 및 노이즈(최대) | 80mVp-p | 120mVp-p | 150mVp-p | 200mVp-p | |
| Volage ADJ Range | 12 -13.2V | 15-16.5V | 24 – 26.4V | 48 ~ 56V | |
| 전압 허용 오차 | ±2.0% | ±1.0% | ±1.0% | ±1.0% | |
| 라인 규제 | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |
| 부하 조절 | ±1.5% | ±1.0% | ±1.0% | ±1.0% | |
| Setup, Rise Time Note.5 | 500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load |
||||
| Hold Up Time (Typ.) | 50ms/230VAC 20ms/115VAC at full load |
||||
| 입력 | 전압 범위 | 85~264VAC 120~370VDC |
|||
| 주파수 범위 | 47~63Hz | ||||
| 효율성(일반) | 78% | 86% | 88% | 87% | |
| AC Current(Typ.) | 1.8A/115VAC 1A/230VAC |
||||
| 돌입 전류(통상) | Cold start: 30A/115VAC, 60A/230VAC |
||||
| 누설 전류 | <1mA/240VAC | ||||
| 보호 | Overload | 105% – 150% rated output power | |||
| 보호 유형: 정전류 제한, 오류 상태 제거 후 자동으로 복구 | |||||
| Overvoltage | 6.25-7.25V | 15.6 – 18V | 31.2-36V | 57.6 – 64.8V | |
| 보호 유형: o/p 전압을 차단하고 복구하려면 전원을 다시 켜세요. | |||||
| 기능 | DC Signal | Relay contact rating (max.): 30V/1A resistive | |||
| 환경 | 작동 습도 | 20% ~ 90%RH non-condensing | |||
| 보관 온도, 습도 | -40°C ~ +85°C, 10% ~ 95%RH | ||||
| 온도계수 | ±0.03%/°C (0 – 50°C) | ||||
| 진동 | Component: 10 – 500Hz, 2G 10min./1 cycle, the period for 60min. each along X, Y, and Z axes; Mounting: Compliance to IEC60068-2-6 | ||||
| 안전 및 EMC | 안전 표준 | UL508, UL60950-1, TUV EN60950-1 approved | |||
| 내전압 | l/P-0/P: 3KVAC l/P-FG: 2KVAC 0/P-FG: 0.5KVAC |
||||
| 절연 저항 | l/P-O/P, l/P-FG, 0/P-FG:>100M Ohms/500VDC/25°C/70% RH | ||||
| EMC 방출 | Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3 | ||||
| EMC 내성 | Compliance to EN6100(M-2,3,4,5,6,8,11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A | ||||
| 기타 | MTBF | 299.2K hrs min. MIL-HDBK-217F (25°C) | |||
| 차원 | 50*90*100mm (W*H*D) | ||||
| 포장 | 0.42Kg; 30pcs/20Kg/0.82CUFT | ||||
| Note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load, and 25°C of ambient temperature. | ||||
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. | |||||
| 3. Tolerance: includes set up tolerance, line regulation, and load regulation. | |||||
| 4. The power supply is considered a component that will be installed into the final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies. | |||||
| 5. The length of set-up time is measured at the first cold start. Turning ON/OFF the power supply may lead to an increase in the set-up time. | |||||
Plastic shell 5V/12V/24V/48V dc dinrail power supply 100w
MDR-100 is a slim line DIN rail Class I switching power supply.
Designed with a fully isolated plastic case to prevent user contact and the risk of shock.Featuring up to 88% efficiency this series can be cooled using only free air convection up to 60°C which significantly increases the reliability and lifetime of the power supply.Other standard features include its low no-load power consumption, to save energy, short circuit, overload, and over voltage protections, and DC OK relay contact with LED indicator for monitoring the PSU status.If you have any questions, please do not hesitate to contact us at 이메일: [email protected]
- 설명
Quick Deliver after putting an order, within 3-7 works days for common models
모든 제품은 생산 과정에서 표준화된 테스트 절차를 거칩니다.
We make transformers and power inductors with pure coppers all by ourselves,
Global wide input volatge range 100V to 264V AC
This product is small and easy to install, which is space and cost-efficient.
Fixed switching frequency at 70KHz
자연 공기의 대류를 통해 제품을 냉각할 수 있습니다.
Save space and cost
