| 사양 | S-1000-12 | S-1000-24 | S-1000-36 | S-1000-48 |
| DC 출력 전압, 전류 | 12V 0～80A | 24V 0～42A | 36V 0～28A | 48V 0～21A |
| 파도와 소음 | 150mVp-P | 180mVp-P | 180mVp-P | 240mVp-P |
| 입구 와이어 안정성 | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| 부하 안정성 | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| 능률 | 0.8 | 0.85 | 0.85 | 0.87 |
| DC 전압의 조정 가능 범위 | ±10% | ±10% | ±10% | ±10% |
| 입력 전압 범위 | 100~132VAC/200~264VAC by switch 254~370VDC 47～63Hz | |||
| 충격전류 | Cold start current 45A/230VAC | |||
| 과부하 보호 | 105%～135%cut off the output,automatic recovery | |||
| 기타 보호 | Over current protection /Short-circuit protection | |||
| 설정, 상승, 가동 시간 유지 | 2000ms,50ms,20ms/230VAC at full load | |||
| 전압을 견딜 수 있습니다 | I/P-O/P:1.5kV I/P-FG:1.5kV O/P-FG:0.5kV 1분 | |||
| 절연 저항 | I/P-O/P I/P-FG O/P-FG:500VDC/100MΩ | |||
| 작동 온도 | -10℃~+50℃ | |||
| 차원 | 291×132×68mm | |||
| 무게 | 2.65kg | |||
| 포장 | 37.5×31×25.5CM/6PCS/16kg | |||
S-1000W series normal single switching power supply
WeHo professional 1000W Switching CNC Power Supply can be widely used in Industrial Automation and CNC Stepper/Servo Systems.
115V and 230V can be chosen by the switch.Powerful functions(eg. PWM control) and professional designs (Built-in big fan for cooling) ensure high efficiency and high reliability of the power supply.Low cost also makes it more acceptable for general usage.If you have any questions, please do not hesitate to contact us at 이메일: [email protected]
- 설명
We can customize different voltage of outputs 12v 24v 13.5v 27v 36v 48v 60v 70v 110v.
This product has an integrated design that minimizes temperature rise and calorific value.
We are a power supply manufacturer with 15 years of experience.
This product has a universal AC input that is full range (up to 264VAC).
This product is both low-cost and reliable.
This product is covered by a 24-month warranty.
The internal EMI and DC fans of this product.
Product size: 291*132*68mm (L * W * H)
