SP-6000 High Power Switching Power Supply
SP-6000 is a 6KW single output chassis type AC to DC power supply.
Built-in multiple functions such as output voltage,Current adjustable, current sharing, remote on/off control, 485 communication control, auxiliary power supply and other functions provide a variety of flexible designs.Can be used in industrial control or automation devices, laser-related machines, UV curing equipment, charging equipment, test and measurement instruments, and aging equipment.If you have any questions, please do not hesitate to contact us atEmail: [email protected]
- 설명
특징
1、Voltage input range: 95-265VAC
2、Protection type: short circuit/overcurrent/overvoltage/overtemperature
3、Power factor PF≧0.99
4、Working efficiency up to 93%
5、485 communication control
Technical Parameters
| 모델 | SP-6000-24 | SP-6000-36 | SP-6000-48 | SP-6000-60 | SP-6000-110 | SP-6000-220 | |
| 산출 | DC voltage | 24V | 36V | 48V | 60V | 110V | 220V |
| 정격 전류 | 250A | 166.6A | 125A | 100A | 54.5A | 27.2A | |
| 현재 범위 | 0 – 250A | 0 – 166.6A | 0 – 125A | 0 – 100A | 0 – 54.5A | 0 – 27.2A | |
| 정격 출력 | 6000W | ||||||
| 리플 | 500mV | 500mV | 600mV | 600mV | 1000mV | 1500mV | |
| Constant current optimum range | 12 – 24V | 18 – 36V | 24 – 48V | 30 – 60V | 55 – 110V | 110 – 220V | |
| Rated voltage accuracy | ± 1.0% | ||||||
| 라인 규제 | ± 1.0% | ||||||
| 부하 조절 | ± 1.0% | ||||||
| Startup & Rise Time | 1500mS，700mS/230VAC(Fully loaded） | ||||||
| 입력 | 전압 범위 | 95-190VAC(Output Current 50%),195-265VAC(Output Current 100%) | |||||
| 주파수 범위 | 45Hz – 65Hz | ||||||
| 역률 | PF≧0.99/230VAC(Fully loaded) | ||||||
| Efficiency(MAX) | 90 % | 91.5 % | 92 % | 92 % | 92.5 % | 93 % | |
| Ac Current | ＜56A | ||||||
| 누설 전류 | ＜3.0mA / 240VAC | ||||||
| 보호하다 | 단락 | When the constant current is entered and the voltage is lower than 10% of the rated voltage, the output is shut down and locked after 1 second, and recovers after restarting. | |||||
| Overcurrent | The user can set the over-current value to delay the output for 5 seconds and then shut down the output, and then resume after restarting. | ||||||
| Overpressure | Users can set the overvoltage value to shut down the output voltage, and restore after restart | ||||||
| 과열 | Shut down the output, automatically recover or restart after the temperature drops | ||||||
| 기능 | 출력 전압 조정 | 0 – 26.4V | 0 – 39.6V | 0 – 52.8V | 0 – 66V | 0 – 121V | 0 – 242V |
| Output constant current adjustment | 0 – 250A | 0 – 166.6A | 0 – 125A | 0 – 100A | 0 – 54.5A | 0 – 27.2A | |
| 485 Communications | MODBUS Communication Protocol | ||||||
| Isolated auxiliary power supply | 12V 0.5A (Need customization) | ||||||
| Output remote switch | Default power on, high level power off （5V-12V） (Need customization) | ||||||
| Alarm signal output | Power Good Signal (Dry Contact≦ 36V,0.1A)(Need customization) | ||||||
| 환경 | 작동 온도 | -20 – +60℃ | |||||
| 작동 습도 | -20 – 90% RH No condensation | ||||||
| Storage temperature and humidity | -40 – +85℃, 10 – 95% RH No condensation | ||||||
| 진동 저항 | 10 – 500Hz, 2G 10 Min/Cycle, X、Y、Z 60 Min | ||||||
| Safety Regulations | 단열성 저항 | Input to Output:100Mhms/500VDC/25℃/70%RH | |||||
| 내압성 | I/P-O/P :2KVAC I/P-FG :2KVAC O/P-FG :0.5KVAC | ||||||
| 다른 | 크기 | 432*179*242mm（L*W*H） | |||||
| Net Weight | 9 KG | ||||||
| 주목 | 1. All parameters are measured at 230VAC input voltage, rated load and 25℃ unless otherwise specified. 2. Ripple and noise voltage are measured with a 20MHz bandwidth oscilloscope with 0.1μ and 47μ capacitors added to the end of a 12-inch twisted pair, and measured at 20MHZ bandwidth. 3. Accuracy: includes setting error, linear regulation rate and load regulation rate. 4. Output must be derated for low input voltage conditions, please refer to the static characteristic curve for details. 5. Startup time is measured under cold start, and frequent switching may increase the startup time. |
||||||
Static characteristic curve
